// DialogFactCfg.cpp: 实现文件
//

#include "pch.h"
#include "MTerm2.h"
#include "DialogFactCfg.h"
#include "afxdialogex.h"

#include "MTerm2Doc.h"

// CDialogFactCfg 对话框

IMPLEMENT_DYNAMIC(CDialogFactCfg, CDialogEx)

CDialogFactCfg::CDialogFactCfg(CWnd* pParent /*=nullptr*/)
	: CDialogEx(IDD_DIALOG_FACT_CFG, pParent)
{
	InitDataItems();
}

CDialogFactCfg::~CDialogFactCfg()
{
}

void CDialogFactCfg::DoDataExchange(CDataExchange* pDX)
{
	CDialogEx::DoDataExchange(pDX);
}


BEGIN_MESSAGE_MAP(CDialogFactCfg, CDialogEx)
	ON_BN_CLICKED(IDC_BUTTON_CONN, &CDialogFactCfg::OnBnClickedButtonConn)
	ON_BN_CLICKED(IDC_BUTTON_DISCONN, &CDialogFactCfg::OnBnClickedButtonDisconn)
	ON_BN_CLICKED(IDC_BUTTON_READDATA, &CDialogFactCfg::OnBnClickedButtonReaddata)
	ON_BN_CLICKED(IDC_BUTTON_WRITEDATA, &CDialogFactCfg::OnBnClickedButtonWritedata)

	ON_BN_CLICKED(IDC_BUTTON1, &CDialogFactCfg::OnBnClickedBtn1)
	ON_BN_CLICKED(IDC_BUTTON3, &CDialogFactCfg::OnBnClickedBtn3)
	ON_BN_CLICKED(IDC_BUTTON4, &CDialogFactCfg::OnBnClickedBtn4)
	ON_BN_CLICKED(IDC_BUTTON5, &CDialogFactCfg::OnBnClickedBtn5)
	ON_BN_CLICKED(IDC_BUTTON_CLEAR, &CDialogFactCfg::OnBnClickedBtnClear)
	ON_BN_CLICKED(IDC_BUTTON_ADD, &CDialogFactCfg::OnBnClickedBtnAdd)
	ON_BN_CLICKED(IDC_BUTTON_BACKSPACE, &CDialogFactCfg::OnBnClickedBtnBackSpace)


	ON_BN_CLICKED(IDC_BUTTON_0, &CDialogFactCfg::OnBnClickedButton0)
	ON_BN_CLICKED(IDC_BUTTON1_DOT, &CDialogFactCfg::OnBnClickedButton1Dot)
	ON_BN_CLICKED(IDC_BUTTON_EQ, &CDialogFactCfg::OnBnClickedButtonEq)
END_MESSAGE_MAP()

// CDialogFactCfg 消息处理程序
int CDialogFactCfg::AddDataItem(int nOffset, int nSize, int nType, CString sName)
{
	FactoryDataItems[nFactoryDataItemsCount] = { nOffset,nSize,nType,sName };
	nFactoryDataItemsCount++;
	return 0;
}

int CDialogFactCfg::InitDataItems()
{
	AddDataItem(0, 2, typeBIN, _T("开始标志"));
	AddDataItem(2, 2, typeINT, _T("序号"));
	AddDataItem(4, 2, typeHEX, _T("ModelNo"));
	AddDataItem(6, 2, typeHEX, _T("ModelVer"));
	AddDataItem(8, 4, typeUINT, _T("nLotNo"));
	AddDataItem(12, 4, typeDATETIME, _T("nProductDate"));
	AddDataItem(16, 4, typeHEX, _T("nSN1"));
	AddDataItem(20, 4, typeHEX, _T("nProtocalVer"));
	AddDataItem(24, 4, typeHEX, _T("nDefaultFuncr"));
	AddDataItem(28, 16, typeString, _T("sModelStr"));
	AddDataItem(44, 16, typeString, _T("sLot_No"));
	AddDataItem(60, 16, typeString, _T("sSNStr"));
	AddDataItem(76, 2, typeHEX, _T("CRC1"));
	AddDataItem(78, 2, typeHEX, _T("EndSign"));
	return 0;
}

int CDialogFactCfg::FindIdByName(CString sName)
{
	for (int i = 0; i < nFactoryDataItemsCount; i++)	{
		if (FactoryDataItems[i].sName == sName)	{
			return i;
		}
	}
	return -1;
}

int CDialogFactCfg::GetDataByOffset(void * pDataBlock, int nOffset)
{
	return 0;
}
int CDialogFactCfg::GetDataByName(void * pDataBlock, CString sName)
{
	return 0;
}
CString CDialogFactCfg::GetDataStrByName(void * pDataBlock, CString sName)
{
	UCHAR * pBuf2 = (UCHAR *)pDataBlock;
	CString s1;
	UCHAR buf3[256];
	CString s3;
	int nIdx = FindIdByName(sName);
	if (nIdx >= 0)
	{
		CTime ctime1;
		int nType = FactoryDataItems[nIdx].nType;
		int nSize = FactoryDataItems[nIdx].nSize;
		int nOffset = FactoryDataItems[nIdx].nOffset;
		int nValue;
		UINT uValue;
		switch (nType)
		{
		case typeINT:
			if (nSize == 1) {
				nValue = *((char *)(pBuf2 + nOffset));
			}
			else if (nSize == 2) {
				nValue = *(short *)(pBuf2 + nOffset);
			}
			else if (nSize == 3) {

			}
			else if (nSize == 4) {
				nValue = *(int *)(pBuf2 + nOffset);
			}
			s1.Format(_T("%d"), nValue);
			break;
		case typeUINT:
			if (nSize == 1) {
				uValue = *((UCHAR *)(pBuf2 + nOffset));
			}
			else if (nSize == 2) {
				uValue = *(USHORT *)(pBuf2 + nOffset);
			}
			else if (nSize == 3) {

			}
			else if (nSize == 4) {
				uValue = *(UINT *)(pBuf2 + nOffset);
			}
			s1.Format(_T("%u"), uValue);
			break;
		case typeHEX:
			if (nSize == 1) {
				uValue = *((UCHAR *)(pBuf2 + nOffset));
				s1.Format(_T("%02X"), uValue);
			}
			else if (nSize == 2) {
				uValue = *(USHORT *)(pBuf2 + nOffset);
				s1.Format(_T("%04X"), uValue);
			}
			else if (nSize == 3) {

			}
			else if (nSize == 4) {
				uValue = *(UINT *)(pBuf2 + nOffset);
				s1.Format(_T("%08X"), uValue);
			}

			break;
		case typeBIN:
			if (nSize == 1) {
				uValue = *((UCHAR *)(pBuf2 + nOffset));
				s1.Format(_T("%02X"), uValue);
			}
			else if (nSize == 2) {
				uValue = *(USHORT *)(pBuf2 + nOffset);
				s1.Format(_T("%04X"), uValue);
			}
			else if (nSize == 3) {

			}
			else if (nSize == 4) {
				uValue = *(UINT *)(pBuf2 + nOffset);
				s1.Format(_T("%08X"), uValue);
			}

			break;
		case typeFLOAT:
			break;
		case typeFIX:
			break;
		case typeBIT:
			break;
		case typeString:
			for (int j = 0; j < nSize; j++)
			{
				buf3[j] = pBuf2[nOffset + j];
			}
			buf3[nSize] = 0;
			s3 = buf3;
			s1.Format(_T("%s"), s3);
			break;
		case typeDATETIME:
			nValue = *(UINT *)(pBuf2 + nOffset);
			ctime1 = nValue;
			ctime1 = CStringToCTime(_T("2000-01-01 08:00:00"));
			ctime1 += nValue;
			s3 = ctime1.Format(_T("%Y-%m-%d %H:%M:%S"));
			s1.Format(_T("%s"), s3);
			break;
		default:
			break;
		}
	}
	return s1;
}
int CDialogFactCfg::SetDataByName(void * pDataBlock, CString sName, UINT uValue)
{
	UCHAR * pBuf2 = (UCHAR *)pDataBlock;
//	UCHAR buf3[256];
	int nIdx = FindIdByName(sName);
	if (nIdx >= 0)
	{
		CTime ctime1;
		CTime ctime2;
		CTimeSpan ctime3;
		int nType = FactoryDataItems[nIdx].nType;
		int nSize = FactoryDataItems[nIdx].nSize;
		int nOffset = FactoryDataItems[nIdx].nOffset;
		int nValue;
		switch (nType)
		{
		case typeINT:
			if (nSize == 1) {
				*((char *)(pBuf2 + nOffset)) = uValue;
			}
			else if (nSize == 2) {
				*(short *)(pBuf2 + nOffset) = uValue;
			}
			else if (nSize == 3) {

			}
			else if (nSize == 4) {
				*(int *)(pBuf2 + nOffset) = uValue;
			}
			break;
		case typeUINT:
			if (nSize == 1) {
				*((UCHAR *)(pBuf2 + nOffset)) = uValue;
			}
			else if (nSize == 2) {
				*(USHORT *)(pBuf2 + nOffset) = uValue;
			}
			else if (nSize == 3) {

			}
			else if (nSize == 4) {
				*(UINT *)(pBuf2 + nOffset) = uValue;
			}
			break;
		case typeBIN:
			if (nSize == 1) {
				*((UCHAR *)(pBuf2 + nOffset)) = uValue;
			}
			else if (nSize == 2) {
				*(USHORT *)(pBuf2 + nOffset) = uValue;
			}
			else if (nSize == 3) {

			}
			else if (nSize == 4) {
				*(UINT *)(pBuf2 + nOffset) = uValue;
			}

			break;
		case typeFLOAT:
			break;
		case typeFIX:
			break;
		case typeBIT:
			break;
		case typeString:
			break;
		case typeDATETIME:
			ctime1 = CStringToCTime(_T("2000-01-01 08:00:00"));
			ctime2 = uValue;
			ctime3 = ctime2 - ctime1;
			nValue = ctime3.GetTotalSeconds();
			*(UINT *)(pBuf2 + nOffset) = uValue;

			break;
		default:
			break;
		}
	}
	return 0;
}
int CDialogFactCfg::SetDataByName(void * pDataBlock, CString sName, CString sValue)
{
	UCHAR * pBuf2 = (UCHAR *)pDataBlock;
//	UCHAR buf3[256];
	CStringA s3;
	int nIdx = FindIdByName(sName);
	if (nIdx >= 0)
	{
		CTime ctime1;
		CTime ctime2;
		CTimeSpan ctime3;
		int nType = FactoryDataItems[nIdx].nType;
		int nSize = FactoryDataItems[nIdx].nSize;
		int nOffset = FactoryDataItems[nIdx].nOffset;
		int nValue;
		int len;
		switch (nType)
		{
		case typeINT:
			if (nSize == 1) {
				*((char *)(pBuf2 + nOffset)) = _tstoi(sValue);
			}
			else if (nSize == 2) {
				*(short *)(pBuf2 + nOffset) = _tstoi(sValue);
			}
			else if (nSize == 3) {

			}
			else if (nSize == 4) {
				*(int *)(pBuf2 + nOffset) = _tstoi(sValue);
			}
			break;
		case typeUINT:
			if (nSize == 1) {
				*((UCHAR *)(pBuf2 + nOffset)) = _tstoi(sValue);
			}
			else if (nSize == 2) {
				*(USHORT *)(pBuf2 + nOffset) = _tstoi(sValue);
			}
			else if (nSize == 3) {

			}
			else if (nSize == 4) {
				*(UINT *)(pBuf2 + nOffset) = _tstoi(sValue);
			}
			break;
		case typeBIN:
			if (nSize == 1) {
				*((UCHAR *)(pBuf2 + nOffset)) = _tstoi(sValue);
			}
			else if (nSize == 2) {
				*(USHORT *)(pBuf2 + nOffset) = _tstoi(sValue);
			}
			else if (nSize == 3) {

			}
			else if (nSize == 4) {
				*(UINT *)(pBuf2 + nOffset) = _tstoi(sValue);
			}

			break;
		case typeFLOAT:
			break;
		case typeFIX:
			break;
		case typeBIT:
			break;
		case typeString:
			s3 = sValue;
			len = s3.GetLength();
			for (int j = 0; j < nSize; j++) {
				if (j < len) {
					pBuf2[nOffset + j] = s3[j];
				}else {
					pBuf2[nOffset + j] = ' ';
				}
			}
			break;
		case typeDATETIME:
			ctime1 = CStringToCTime(_T("2000-01-01 08:00:00"));
			ctime2 = CStringToCTime(sValue);;
			ctime3 = ctime2 - ctime1;
			nValue = ctime3.GetTotalSeconds();
			*(UINT *)(pBuf2 + nOffset) = nValue;

			break;
		default:
			break;
		}
	}
	return 0;
}



CMTerm2Doc * CDialogFactCfg::GetDocument()
{
	// TODO: 在此处添加实现代码.
	CMDIFrameWnd  *pFrame = (CMDIFrameWnd*)AfxGetApp()->m_pMainWnd;
	CMDIChildWnd  *pChild = (CMDIChildWnd   *)pFrame->GetActiveFrame();
	CView   *pV = (CView*)pChild->GetActiveView();
	CMTerm2Doc* pDoc = (CMTerm2Doc *)(pV->GetDocument());
	return pDoc;
}

int CDialogFactCfg::Connect()
{
	// TODO: 在此处添加实现代码.
	CString s1;
	CMTerm2Doc* pDoc = (CMTerm2Doc *)GetDocument();


	int r = pDoc->Connect();
	s1.Format(_T("Open %s  = %d"), pDoc->myHvSerialPort1.m_strResult, r);
	SysLog(s1);
	if (r == pDoc->myHvSerialPort1.R_OK)
	{
		pDoc->MyKLink1.Open();
		return false;
	}
	return true;
	return 0;
}


int CDialogFactCfg::Disconnect()
{
	// TODO: 在此处添加实现代码.
	CMTerm2Doc* pDoc = (CMTerm2Doc *)GetDocument();
	
	pDoc->DisConnect();
	pDoc->MyKLink1.Close();
	return 0;
}

int CDialogFactCfg::ReadData()
{
	CMTerm2Doc* pDoc = (CMTerm2Doc *)GetDocument();

	unsigned short buf1[1024];
	int res = pDoc->MyKLink1.GetInfo(1, 0, 0, 16, buf1);
	SysLog(pDoc->MyKLink1.m_resultStr);
	CString s1;
	s1.Format(_T("GetInfo = %d "), res);
	if (res == KLink::KL_OK)
	{
		s1.Append(_T("\r\n"));
		for (int i = 0; i < 16 / 2; i++)
		{
			s1.AppendFormat(_T("%04X "), buf1[i]);
		}
	}
	SysLog(s1);
	
	s1.Format(_T("%04X"), buf1[0]);
	SetDlgItemText(IDC_EDIT_DEVICE_TYPE, s1);
	s1.Format(_T("%04X"), buf1[1]);
	SetDlgItemText(IDC_EDIT_FIRM_VER, s1);
	s1.Format(_T("%04X"), buf1[2]);
	SetDlgItemText(IDC_EDIT_KLINK_VER, s1);
	s1.Format(_T("%04X"), buf1[3]);
	SetDlgItemText(IDC_EDIT_CAP, s1);

	CString s2;
	CString s3;
	unsigned char buf2[1024];
	res = pDoc->MyKLink1.GetUID(1, 0, 0, 12, (unsigned short *)buf2);
	SysLog(pDoc->MyKLink1.m_resultStr);
	s1.Format(_T("GetUID = %d "), res);
	
	if (res == KLink::KL_OK)
	{
		s1.Append(_T("\r\n"));
		for (int i = 0; i < 12; i++)
		{
			s1.AppendFormat(_T("%02X "), buf2[i]);
			s2.AppendFormat(_T("%02X"), buf2[12-i-1]);
		//	s3.AppendFormat(_T("%c"), buf2[12 - i - 1]);
		}
	}
	SysLog(s1);
	SetDlgItemText(IDC_EDIT_DEVICE_UID, s2);

	
	res = pDoc->MyKLink1.GetSN(1, 0, 0, 4, (unsigned short *)buf2);
	SysLog(pDoc->MyKLink1.m_resultStr);
	s1.Format(_T("GetSN = %d "), res);
	s2.Empty();
	if (res == KLink::KL_OK)
	{
		s1.Append(_T("\r\n"));
		for (int i = 0; i < 4; i++)
		{
			s1.AppendFormat(_T("%02X "), buf2[i]);
			s2.AppendFormat(_T("%02X"), buf2[4-i-1]);
			//	s3.AppendFormat(_T("%c"), buf2[12 - i - 1]);
		}
	}
	SysLog(s1);
	SetDlgItemText(IDC_EDIT_ORG_FACT_SN, s2);

	res = pDoc->MyKLink1.GetFactoryData(1, 0, 0, 80, (unsigned short *)buf2);
	SysLog(pDoc->MyKLink1.m_resultStr);
	s1.Format(_T("GetFactoryData = %d "), res);
	s2.Empty();
	if (res == KLink::KL_OK)
	{
		s1.Append(_T("\r\n"));
		for (int i = 0; i < 80; i++)
		{
			s1.AppendFormat(_T("%02X "), buf2[i]);
			s2.AppendFormat(_T("%02X"), buf2[4 - i - 1]);
			//	s3.AppendFormat(_T("%c"), buf2[12 - i - 1]);
		}
	}
	SysLog(s1);
//	SetDlgItemText(IDC_EDIT_ORG_FACT_SN, s2);

//	unsigned char buf3[1024];
	CTime ctime1;
	for (int i = 0; i < nFactoryDataItemsCount; i++)
	{
//		int nType = FactoryDataItems[i].nType;
//		int nSize = FactoryDataItems[i].nSize;
//		int nOffset = FactoryDataItems[i].nOffset;
		CString sName = FactoryDataItems[i].sName;
		s3 = GetDataStrByName(buf2,sName);
		s1.Format(_T("%d %s %s"), i, sName, s3);
		SysLog(s1);
	}

	s3=GetDataStrByName(buf2, _T("nLotNo"));
	SetDlgItemText(IDC_EDIT_ORG_LOT_NO, s3);

	s3 = GetDataStrByName(buf2, _T("nProductDate"));
	SetDlgItemText(IDC_EDIT_ORG_FAC_DATE, s3);


	return 0;
}



int CDialogFactCfg::WriteData()
{
	// TODO: 在此处添加实现代码.

	CString s1;
	CMTerm2Doc* pDoc = (CMTerm2Doc *)GetDocument();
	unsigned short buf1[1024];
//	unsigned char buf2[1024];
//	unsigned char buf3[1024];
/*
	AddDataItem(0, 2, typeBIN, _T("开始标志"));
	AddDataItem(2, 2, typeINT, _T("序号"));
	AddDataItem(4, 2, typeBIN, _T("ModelNo"));
	AddDataItem(6, 2, typeBIN, _T("ModelVer"));
	AddDataItem(8, 4, typeUINT, _T("nLotNo"));
	AddDataItem(12, 4, typeDATETIME, _T("nProductDate"));
	AddDataItem(16, 4, typeBIN, _T("nSN1"));
	AddDataItem(20, 4, typeBIN, _T("nProtocalVer"));
	AddDataItem(24, 4, typeBIN, _T("nDefaultFuncr"));
	AddDataItem(28, 16, typeString, _T("sModelStr"));
	AddDataItem(44, 16, typeString, _T("sLot_No"));
	AddDataItem(60, 16, typeString, _T("sSNStr"));
	AddDataItem(76, 2, typeBIN, _T("CRC1"));
	AddDataItem(78, 2, typeBIN, _T("EndSign"));
*/
	UINT uValue;

	SetDataByName(buf1, _T("开始标志"), 0x55AA);
	SetDataByName(buf1, _T("序号"), 0x0002);
	SetDataByName(buf1, _T("ModelNo"), 0x0008);
	SetDataByName(buf1, _T("ModelVer"), 0x0100);
	GetDlgItemText(IDC_EDIT_LOT_NO, s1);	uValue = _tstoi(s1);
	SetDataByName(buf1, _T("nLotNo"), uValue);
	SetDataByName(buf1, _T("nProductDate"), 0x2996c000);

	GetDlgItemText(IDC_EDIT_FACT_SN, s1);  	uValue = _tstoi(s1);
	SetDataByName(buf1, _T("nSN1"), uValue);
	SetDataByName(buf1, _T("nProtocalVer"), 0x01000100);
	SetDataByName(buf1, _T("nDefaultFuncr"), 0x00000001);
	SetDataByName(buf1, _T("sModelStr"), _T("12122121"));
	SetDataByName(buf1, _T("sLot_No"), _T("34344343"));
	SetDataByName(buf1, _T("sSNStr"), _T("56566565"));
	SetDataByName(buf1, _T("CRC1"), 0xEFEF);
	SetDataByName(buf1, _T("EndSign"), 0x55AA);


	int res = pDoc->MyKLink1.WriteFactoryData(1, 0, 0, 80, buf1);
	SysLog(pDoc->MyKLink1.m_resultStr);
	s1.Format(_T("WriteFactoryData = %d "), res);

	return 0;
}

void CDialogFactCfg::OnBnClickedButtonReaddata()
{
	// TODO: 在此添加控件通知处理程序代码
	ReadData();
}

void CDialogFactCfg::OnBnClickedButtonConn()
{
	// TODO: 在此添加控件通知处理程序代码
	Connect();

}


void CDialogFactCfg::OnBnClickedButtonDisconn()
{
	// TODO: 在此添加控件通知处理程序代码
	Disconnect();

}




void CDialogFactCfg::OnBnClickedButtonWritedata()
{
	// TODO: 在此添加控件通知处理程序代码
	WriteData();

}

CString saveInputStr=_T(""), saveInput1Str= _T("");
CString sDisplayStr;
CString sStoreStr;
bool bEditEndFlg = false;

int CDialogFactCfg::CharKeyClick(CString sKey)
{
	// TODO: 在此处添加实现代码.
	if (bEditEndFlg)
	{
		sDisplayStr.Empty();
		bEditEndFlg = false;
	}
	sDisplayStr.Append(sKey);
	int len1 = sDisplayStr.GetLength();
	if (len1 > 1 && sDisplayStr[0] == _T('0')) sDisplayStr = sDisplayStr.Right(sDisplayStr.GetLength() - 1);

	SetDlgItemText(IDC_EDIT_VIEW, sDisplayStr);
	return 0;
}
void CDialogFactCfg::OnBnClickedBtn1()
{
	CharKeyClick(_T("1"));
}
void CDialogFactCfg::OnBnClickedBtn3()
{
	CharKeyClick(_T("3"));
}
void CDialogFactCfg::OnBnClickedBtn4()
{
	CharKeyClick(_T("4"));
}
void CDialogFactCfg::OnBnClickedBtn5() 
{
	CharKeyClick(_T("5"));
}
void CDialogFactCfg::OnBnClickedBtnClear()
{
	sDisplayStr.Empty();
	bEditEndFlg = false;
	SetDlgItemText(IDC_EDIT_VIEW, _T("0"));
}
void CDialogFactCfg::OnBnClickedBtnAdd() 
{
	bEditEndFlg = true;
	sStoreStr = sDisplayStr;

	//saveInput1Str = saveInputStr;
	//saveInputStr = "";
}
void CDialogFactCfg::OnBnClickedBtnBackSpace()
{
	int len1 = sDisplayStr.GetLength();
	if (len1 > 1)
	{
		sDisplayStr = sDisplayStr.Left(sDisplayStr.GetLength() - 1);
	}
	else if (len1 == 1)
	{
		sDisplayStr = "0";
	}
//	bEditEndFlg = false;
	SetDlgItemText(IDC_EDIT_VIEW, sDisplayStr);
}



void CDialogFactCfg::OnBnClickedButton0()
{
	// TODO: 在此添加控件通知处理程序代码
	CharKeyClick(_T("0"));
}


void CDialogFactCfg::OnBnClickedButton1Dot()
{
	// TODO: 在此添加控件通知处理程序代码
	CharKeyClick(_T("."));
}


void CDialogFactCfg::OnBnClickedButtonEq()
{
	// TODO: 在此添加控件通知处理程序代码
	bEditEndFlg = true;

	float a = _tstof(sStoreStr);
	float b = _tstof(sDisplayStr);

	float c = a + b;

	sDisplayStr.Format(_T("%g"),c);
	SetDlgItemText(IDC_EDIT_VIEW, sDisplayStr);

}