From 7a54c0d5730cb2d02229c0ce515bc100bf211079 Mon Sep 17 00:00:00 2001
From: QuakeGod <QuakeGod@sina.com>
Date: 星期一, 17 十月 2022 20:42:45 +0800
Subject: [PATCH] arrange again radio fp0 klink knet
---
Src/BSP.c | 110 +++++++++++++++++++++++++++++++++++++-----------------
1 files changed, 75 insertions(+), 35 deletions(-)
diff --git a/Src/BSP.c b/Src/BSP.c
index 34a69bd..f2e255c 100644
--- a/Src/BSP.c
+++ b/Src/BSP.c
@@ -12,6 +12,9 @@
#include "Globaldef.h"
#include "Functions.h"
+#if (BOARD_TYPE == 14)
+#include "fp0.h"
+#endif
/*
if ((nCurTick &0xff) ==0)
@@ -367,35 +370,12 @@
/* SPI1 interrupt Init */
NVIC_SetPriority(SPI1_IRQn, 0);
- NVIC_EnableIRQ(SPI1_IRQn);
+// NVIC_EnableIRQ(SPI1_IRQn);
/* USER CODE BEGIN SPI1_Init 1 */
-#if (BOARD_TYPE == 14)
+#if (BOARD_TYPE == 13)
- /* USER CODE END SPI1_Init 1 */
-
- /* SPI1 parameter configuration*/
- SPI_InitStruct.TransferDirection = LL_SPI_FULL_DUPLEX;
- SPI_InitStruct.Mode = LL_SPI_MODE_SLAVE;
- SPI_InitStruct.DataWidth = LL_SPI_DATAWIDTH_8BIT;
- SPI_InitStruct.ClockPolarity = LL_SPI_POLARITY_LOW; //LL_SPI_POLARITY_LOW;
- SPI_InitStruct.ClockPhase = LL_SPI_PHASE_2EDGE ; //LL_SPI_PHASE_1EDGE;
- SPI_InitStruct.NSS = LL_SPI_NSS_SOFT;
- SPI_InitStruct.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV4;
- SPI_InitStruct.BitOrder = LL_SPI_LSB_FIRST;
- SPI_InitStruct.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE;
- SPI_InitStruct.CRCPoly = 7;
- LL_SPI_Init(SPI1, &SPI_InitStruct);
-
- LL_SPI_SetStandard(SPI1, LL_SPI_PROTOCOL_MOTOROLA);
- LL_SPI_DisableNSSPulseMgt(SPI1);
- LL_SPI_SetRxFIFOThreshold(SPI1,LL_SPI_RX_FIFO_TH_QUARTER);
-// LL_SPI_EnableNSSPulseMgt(SPI1);
-
- /* USER CODE BEGIN SPI1_Init 2 */
-
-#elif (BOARD_TYPE == 13)
-
+ NVIC_EnableIRQ(SPI1_IRQn);
SPI_InitStruct.TransferDirection = LL_SPI_FULL_DUPLEX;
SPI_InitStruct.Mode = LL_SPI_MODE_MASTER;
SPI_InitStruct.DataWidth = LL_SPI_DATAWIDTH_8BIT;
@@ -413,8 +393,31 @@
LL_SPI_SetRxFIFOThreshold(SPI1,LL_SPI_RX_FIFO_TH_QUARTER);
// LL_SPI_EnableNSSPulseMgt(SPI1);
+#elif (BOARD_TYPE == 14)
+
+ NVIC_EnableIRQ(SPI1_IRQn);
+ SPI_InitStruct.TransferDirection = LL_SPI_FULL_DUPLEX;
+ SPI_InitStruct.Mode = LL_SPI_MODE_SLAVE;
+ SPI_InitStruct.DataWidth = LL_SPI_DATAWIDTH_8BIT;
+ SPI_InitStruct.ClockPolarity = LL_SPI_POLARITY_LOW; //LL_SPI_POLARITY_LOW;
+ SPI_InitStruct.ClockPhase = LL_SPI_PHASE_2EDGE ; //LL_SPI_PHASE_1EDGE;
+ SPI_InitStruct.NSS = LL_SPI_NSS_SOFT;
+ SPI_InitStruct.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV4;
+ SPI_InitStruct.BitOrder = LL_SPI_LSB_FIRST;
+ SPI_InitStruct.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE;
+ SPI_InitStruct.CRCPoly = 7;
+ LL_SPI_Init(SPI1, &SPI_InitStruct);
+
+ LL_SPI_SetStandard(SPI1, LL_SPI_PROTOCOL_MOTOROLA);
+ LL_SPI_DisableNSSPulseMgt(SPI1);
+ LL_SPI_SetRxFIFOThreshold(SPI1,LL_SPI_RX_FIFO_TH_QUARTER);
+// LL_SPI_EnableNSSPulseMgt(SPI1);
+
#else
+ /* USER CODE END SPI1_Init 1 */
+
+ /* SPI1 parameter configuration*/
SPI_InitStruct.TransferDirection = LL_SPI_FULL_DUPLEX;
SPI_InitStruct.Mode = LL_SPI_MODE_MASTER;
SPI_InitStruct.DataWidth = LL_SPI_DATAWIDTH_8BIT;
@@ -428,9 +431,11 @@
LL_SPI_Init(SPI1, &SPI_InitStruct);
LL_SPI_SetStandard(SPI1, LL_SPI_PROTOCOL_MOTOROLA);
-
+
LL_SPI_SetRxFIFOThreshold(SPI1,LL_SPI_RX_FIFO_TH_QUARTER);
- LL_SPI_EnableNSSPulseMgt(SPI1);
+// LL_SPI_EnableNSSPulseMgt(SPI1);
+
+ /* USER CODE BEGIN SPI1_Init 2 */
#endif
@@ -727,7 +732,7 @@
LL_GPIO_PIN_12|LL_GPIO_PIN_13|LL_GPIO_PIN_15;
}
- else if (GetBoardType()==9 || GetBoardType()==10 )
+ else if (GetBoardType()==9 || GetBoardType()==10 || GetBoardType()==15 )
{
GPIO_InitStruct.Pin = LL_GPIO_PIN_3|LL_GPIO_PIN_5|LL_GPIO_PIN_6|LL_GPIO_PIN_7|
LL_GPIO_PIN_11|LL_GPIO_PIN_1|LL_GPIO_PIN_2|LL_GPIO_PIN_10|
@@ -765,8 +770,16 @@
// PWR_BackupAccessCmd( ENABLE );/* ????RTC??????*/
// RCC_LSEConfig( RCC_LSE_OFF ); /* ????????,PC14+PC15??????IO*/
// BKP_TamperPinCmd(DISABLE); /* ????????,PC13??????IO*/
-
-#if (BORAD_TYPE ==12)
+
+#if (BORAD_TYPE == 13)
+
+ GPIO_InitStruct.Pin = LL_GPIO_PIN_15 ;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH;
+ GPIO_InitStruct.Pull = LL_GPIO_OUTPUT_PUSHPULL;
+ LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+#elif (BOARD_TYPE == 14)
GPIO_InitStruct.Pin = LL_GPIO_PIN_4|LL_GPIO_PIN_5|LL_GPIO_PIN_6|LL_GPIO_PIN_7;
GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT;
@@ -805,13 +818,40 @@
GPIO_InitStruct.Pull = LL_GPIO_PULL_UP;
LL_GPIO_Init(OE_PORT, &GPIO_InitStruct);
-#elif (BOARD_TYPE == 13)
+#elif (BOARD_TYPE == 15)
- GPIO_InitStruct.Pin = LL_GPIO_PIN_15 ;
- GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+ // Radio Pins
+ // busy pin
+ GPIO_InitStruct.Pin = LL_GPIO_PIN_7;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH;
- GPIO_InitStruct.Pull = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_UP;
+ LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ // Dio 1 pin
+ GPIO_InitStruct.Pin = LL_GPIO_PIN_12;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_UP;
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+
+ //Sel pin
+ GPIO_InitStruct.Pin = LL_GPIO_PIN_15;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+
+ //RST pin
+ GPIO_InitStruct.Pin = LL_GPIO_PIN_6;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
#endif
--
Gitblit v1.9.1