Radio add channel jumpper config

QuakeGod

2023-01-28 16eeda8e1e205da3395f6933f6f82b22da63c76b

Radio add channel jumpper config

 Inc/KBus.h

@@ -190,13 +190,13 @@


typedef struct tagPacket

    {

        unsigned char Sign;        //起始标记		
        unsigned char DstHost;    //目标地址

        unsigned char SrcAddr;    //源地址

        unsigned char nCMD;        //命令

        unsigned char nSEQ;        //序列号

        unsigned char PacketLen;    //数据载荷长度    不包括头部5个字节，不包括尾部BCC。

        unsigned char data[1];        //数据载荷,最末尾是BCC，数据长度为0时，实际也有一个数据。

        unsigned char Sign;        //起始标记		
        unsigned char DstHost;    //目标地址

        unsigned char SrcAddr;    //源地址

        unsigned char nCMD;        //命令

        unsigned char nSEQ;        //序列号

        unsigned char PacketLen;    //数据载荷长度    不包括头部5个字节，不包括尾部BCC。

        unsigned char data[1];        //数据载荷,最末尾是BCC，数据长度为0时，实际也有一个数据。

    }stPacket,* pPacket;    



enum eResult


 Inc/KLink.h

@@ -189,20 +189,20 @@
/*

typedef struct tagKLPktHdr

{

        unsigned char StSign;        //起始标记

        unsigned char SrcAddr;    //源地址

        unsigned char DstHost;    //目标地址

        unsigned char nCMD;        //命令

        unsigned char StSign;        //起始标记

        unsigned char SrcAddr;    //源地址

        unsigned char DstHost;    //目标地址

        unsigned char nCMD;        //命令

    

}stKLPtHdr, * pKLPktHdr;

*/

/*

typedef struct tagKLRdPkt

{

        unsigned char StSign;        //起始标记		
        unsigned char SrcAddr;    //源地址

        unsigned char DstHost;    //目标地址

        unsigned char nCMD;        //命令

        unsigned char StSign;        //起始标记		
        unsigned char SrcAddr;    //源地址

        unsigned char DstHost;    //目标地址

        unsigned char nCMD;        //命令

        unsigned char nType;

        unsigned char nAddr;    //

}stKLRdPkt,* pKLRdKpt;

@@ -210,13 +210,13 @@
/*

typedef struct tagKLPacket

    {

        unsigned char StSign;        //起始标记		
        unsigned char SrcAddr;    //源地址

        unsigned char DstHost;    //目标地址

        unsigned char nCMD;        //命令

        unsigned char nSEQ;        //序列号

        unsigned char LoadLen;    //数据载荷长度    不包括头部5个字节，不包括尾部BCC。

        unsigned char data[1];        //数据载荷,最末尾是BCC，数据长度为0时，实际也有一个数据。

        unsigned char StSign;        //起始标记		
        unsigned char SrcAddr;    //源地址

        unsigned char DstHost;    //目标地址

        unsigned char nCMD;        //命令

        unsigned char nSEQ;        //序列号

        unsigned char LoadLen;    //数据载荷长度    不包括头部5个字节，不包括尾部BCC。

        unsigned char data[1];        //数据载荷,最末尾是BCC，数据长度为0时，实际也有一个数据。

    }stKLPacket,* pKLPacket;    

*/




 Inc/KMachine.h

@@ -49,9 +49,9 @@
#define LoHofB(x) ((x)&0xf)

#define HiHofB(x) (((x)>>4)&0xf)



//  信息块

//  工厂参数配置块

//  用户/系统参数配置块

//  信息块

//  工厂参数配置块

//  用户/系统参数配置块

//  

//



@@ -103,26 +103,26 @@


enum enPortType

{

    PortType_Com = 0,    //计算机通讯

    PortType_Gen = 1,    //通用通讯，自由口

    PortType_KLink = 2, //KlinkͨѶ

    PortType_KBus = 3,     //KBusͨѶ

    PortType_KNet = 4,     // KNetͨѶ

    PortType_ModbusRTU = 5, //Modbus RTU ͨѶ

    PortType_Com = 0,    //计算机通讯

    PortType_Gen = 1,    //通用通讯，自由口

    PortType_KLink = 2, //Klink通讯

    PortType_KBus = 3,     //KBus通讯

    PortType_KNet = 4,     // KNet通讯

    PortType_ModbusRTU = 5, //Modbus RTU 通讯

};



//每个模块有 0/1/2/3/4/5/6/7/8个 通讯port

//不限于 UART, 网口，无线，单总线等，都是port

//甚至可以有虚拟的port

//每个模块有 0/1/2/3/4/5/6/7/8个 通讯port

//不限于 UART, 网口，无线，单总线等，都是port

//甚至可以有虚拟的port



typedef struct tagPortStat

{

    UCHAR nWorking;            //工作中

    UCHAR nStation;            //自己站号

    UCHAR bBus;                    //总线?,,全双工?

    UCHAR bMaster;            //主机

    UCHAR PortType;            //端口工作模式

    UCHAR nDevices;            //连接的设备数量//不包括自己 //device list;

    UCHAR nWorking;            //工作中

    UCHAR nStation;            //自己站号

    UCHAR bBus;                    //总线?,,全双工?

    UCHAR bMaster;            //主机

    UCHAR PortType;            //端口工作模式

    UCHAR nDevices;            //连接的设备数量//不包括自己 //device list;

    

}stPortStat,*pPortStat;



@@ -146,11 +146,11 @@


typedef struct tagKMFuncParam

{

    USHORT EnablePLC:1;        //使能内部PLC功能

    USHORT RunMode;                //工作模式

    USHORT EnablePLC:1;        //使能内部PLC功能

    USHORT RunMode;                //工作模式

}stKMFuncParam;



// 输入输出地址映射

// 输入输出地址映射



typedef struct tagComPortParam            //4 Bytes

{

@@ -190,7 +190,7 @@
    USHORT workmode;                                    // SC1  // 2 Bytes 0=From jumper  

    USHORT SwitchFunc;                                // SC2  // 2 Bytes 

    

    USHORT OutMappings[6];                                        //12 Bytes //输出映射

    USHORT OutMappings[6];                                        //12 Bytes //输出映射

    

    stComPortParam PortParams[2];                            // 8 Bytes

    stOutputHoldParam OutputParams[16];                //16 Bytes

@@ -237,7 +237,7 @@
    

}stFactData;

*/

typedef struct tagFactoryData        //工厂量产参数，数据

typedef struct tagFactoryData        //工厂量产参数，数据

{

    USHORT Sign1;

    USHORT Seq1;

@@ -396,12 +396,12 @@
    stTimer Timers[TOTALTIMERS];



    union {

    unsigned short WX[KLDataWXCount];        //本机的X和Y

    unsigned short WX[KLDataWXCount];        //本机的X和Y

    unsigned char WXB[KLDataWXCount*2];    

    };

    union {

    unsigned short WY[KLDataWYCount];        //本机的X和Y

    unsigned char WYB[KLDataWYCount*2];        //本机的X和Y

    unsigned short WY[KLDataWYCount];        //本机的X和Y

    unsigned char WYB[KLDataWYCount*2];        //本机的X和Y

    }; 

    unsigned short WR[KLDataWRCount];

    

@@ -412,7 +412,7 @@
    unsigned short SV[KLDataSVCount];

    

    

    unsigned short WLX[16];        //虚拟的X和Y，远程通讯时映射用。

    unsigned short WLX[16];        //虚拟的X和Y，远程通讯时映射用。

    unsigned short WLY[16];

    unsigned short WLR[16];    

    unsigned short WSR[16];

@@ -423,10 +423,10 @@
    unsigned char DTB[KLDataDTCount*2];

};



    // 配置寄存器

    // 系统状态寄存器

    // 特殊寄存器

    // 调试，监控寄存器

    // 配置寄存器

    // 系统状态寄存器

    // 特殊寄存器

    // 调试，监控寄存器

    union {

        unsigned int SDD[KLDataSDTCount/2];

        unsigned short SDT[KLDataSDTCount];


 Inc/KWireLess.h

@@ -18,15 +18,15 @@




/**************************************************************************************************************************************

Demo 程序流程  RadioEnableMaster=true  为主机端，主机端发送一个"PING"数据后切换到接收，等待从机返回的应答"PONG"数据LED闪烁

Demo 程序流程  RadioEnableMaster=true  为主机端，主机端发送一个"PING"数据后切换到接收，等待从机返回的应答"PONG"数据LED闪烁



               RadioEnableMaster=false 为从机端，从机端接收到主机端发过来的"PING"数据后LED闪烁并发送一个"PONG"数据作为应答

               RadioEnableMaster=false 为从机端，从机端接收到主机端发过来的"PING"数据后LED闪烁并发送一个"PONG"数据作为应答

***************************************************************************************************************************************/





extern uint32_t nRadioChannel;

void SendPingMsg(void );



int KWireLessInit(bool bRadioEnableMaster);

int KWireLessInit(bool bRadioEnableMaster, uint32_t nChn);

int KWireLessStart(void);



void OnTxDone( void );


 Inc/ModbusRTU.h

@@ -24,18 +24,18 @@
enum enModbusRTUCmd

{

    None =0,

    ReadCoils =1, //读线圈

    ReadInputs =2,  //读离散量输入

    ReadKeepRegs =3,    //读保持寄存器

    ReadInputRegs =4,    //读输入寄存器

    WriteCoil = 5,        //写单个线圈

    WriteReg =6,        //写单个寄存器

    ReadExptStat = 7,  //读取异常状态

    ReadCoils =1, //读线圈

    ReadInputs =2,  //读离散量输入

    ReadKeepRegs =3,    //读保持寄存器

    ReadInputRegs =4,    //读输入寄存器

    WriteCoil = 5,        //写单个线圈

    WriteReg =6,        //写单个寄存器

    ReadExptStat = 7,  //读取异常状态

    FetchCommEventCtr =11,   //Fetch Comm Event Ctr

                                                     // 12 Fetch Comm Event Log

                                                    

    WriteCoils =15,                //写多个线圈

    WriteRegs = 16,        //写多个寄存器

    WriteCoils =15,                //写多个线圈

    WriteRegs = 16,        //写多个寄存器

                                        //17 Report Slave ID

                                        //20 Read General Reference

                                        //21 Write General Reference


 Inc/functions.h

@@ -21,7 +21,7 @@
extern volatile unsigned int CurTickuS;    

//extern volatile unsigned int ThisRunTime;    

//extern volatile unsigned int TotalRunTime;

//extern volatile unsigned int PwrCount;                //开机次数

//extern volatile unsigned int PwrCount;                //开机次数



typedef unsigned char uint8_t;

typedef unsigned char uchar;


 MDK-ARM/DebugConfig/BootLoader_STM32F030C8Tx.dbgconf

New file
@@ -0,0 +1,42 @@
// File: STM32F030_070.dbgconf

// Version: 1.0.0

// Note: refer to STM32F030x4/x6/x8/xC, STM32F070x6/xB Reference manual (RM0360)

//       refer to STM32F030x4 STM32F030x6, STM32F030x8 STM32F030xC datasheet

//                STM32F070CB STM32F070RB, STM32F070C6 STM32F070F6 datasheet



// <<< Use Configuration Wizard in Context Menu >>>



// <h> Debug MCU configuration register (DBGMCU_CR)

//   <o.2>  DBG_STANDBY              <i> Debug standby mode

//   <o.1>  DBG_STOP                 <i> Debug stop mode

// </h>

DbgMCU_CR = 0x00000006;



// <h> Debug MCU APB1 freeze register (DBGMCU_APB1_FZ)

//                                   <i> Reserved bits must be kept at reset value

//   <o.21> DBG_I2C1_TIMEOUT         <i> I2C1 SMBUS timeout mode stopped when core is halted

//   <o.12> DBG_IWDG_STOP            <i> Independent watchdog stopped when core is halted

//   <o.11> DBG_WWDG_STOP            <i> Window watchdog stopped when core is halted

//   <o.10> DBG_RTC_STOP             <i> RTC stopped when core is halted

//   <o.8>  DBG_TIM14_STOP           <i> TIM14 counter stopped when core is halted

//   <o.5>  DBG_TIM7_STOP            <i> TIM7 counter stopped when core is halted

//   <o.4>  DBG_TIM6_STOP            <i> TIM6 counter stopped when core is halted

//   <o.1>  DBG_TIM3_STOP            <i> TIM3 counter stopped when core is halted

// </h>

DbgMCU_APB1_Fz = 0x00000000;



// <h> Debug MCU APB2 freeze register (DBGMCU_APB2_FZ)

//                                   <i> Reserved bits must be kept at reset value

//   <o.18> DBG_TIM17_STOP           <i> TIM17 counter stopped when core is halted

//   <o.17> DBG_TIM16_STOP           <i> TIM16 counter stopped when core is halted

//   <o.16> DBG_TIM15_STOP           <i> TIM15 counter stopped when core is halted

//   <o.11> DBG_TIM1_STOP            <i> TIM1 counter stopped when core is halted

// </h>

DbgMCU_APB2_Fz = 0x00000000;



// <h> Flash Download Options

//   <o.0> Option Byte Loading       <i> Launch the Option Byte Loading after a Flash Download by setting the OBL_LAUNCH bit (causes a reset)

// </h>

DoOptionByteLoading = 0x00000000;



// <<< end of configuration section >>>


 MDK-ARM/DebugConfig/F030C8T6_Radio_LLCC68_STM32F030C8Tx.dbgconf

New file
@@ -0,0 +1,42 @@
// File: STM32F030_070.dbgconf

// Version: 1.0.0

// Note: refer to STM32F030x4/x6/x8/xC, STM32F070x6/xB Reference manual (RM0360)

//       refer to STM32F030x4 STM32F030x6, STM32F030x8 STM32F030xC datasheet

//                STM32F070CB STM32F070RB, STM32F070C6 STM32F070F6 datasheet



// <<< Use Configuration Wizard in Context Menu >>>



// <h> Debug MCU configuration register (DBGMCU_CR)

//   <o.2>  DBG_STANDBY              <i> Debug standby mode

//   <o.1>  DBG_STOP                 <i> Debug stop mode

// </h>

DbgMCU_CR = 0x00000006;



// <h> Debug MCU APB1 freeze register (DBGMCU_APB1_FZ)

//                                   <i> Reserved bits must be kept at reset value

//   <o.21> DBG_I2C1_TIMEOUT         <i> I2C1 SMBUS timeout mode stopped when core is halted

//   <o.12> DBG_IWDG_STOP            <i> Independent watchdog stopped when core is halted

//   <o.11> DBG_WWDG_STOP            <i> Window watchdog stopped when core is halted

//   <o.10> DBG_RTC_STOP             <i> RTC stopped when core is halted

//   <o.8>  DBG_TIM14_STOP           <i> TIM14 counter stopped when core is halted

//   <o.5>  DBG_TIM7_STOP            <i> TIM7 counter stopped when core is halted

//   <o.4>  DBG_TIM6_STOP            <i> TIM6 counter stopped when core is halted

//   <o.1>  DBG_TIM3_STOP            <i> TIM3 counter stopped when core is halted

// </h>

DbgMCU_APB1_Fz = 0x00000000;



// <h> Debug MCU APB2 freeze register (DBGMCU_APB2_FZ)

//                                   <i> Reserved bits must be kept at reset value

//   <o.18> DBG_TIM17_STOP           <i> TIM17 counter stopped when core is halted

//   <o.17> DBG_TIM16_STOP           <i> TIM16 counter stopped when core is halted

//   <o.16> DBG_TIM15_STOP           <i> TIM15 counter stopped when core is halted

//   <o.11> DBG_TIM1_STOP            <i> TIM1 counter stopped when core is halted

// </h>

DbgMCU_APB2_Fz = 0x00000000;



// <h> Flash Download Options

//   <o.0> Option Byte Loading       <i> Launch the Option Byte Loading after a Flash Download by setting the OBL_LAUNCH bit (causes a reset)

// </h>

DoOptionByteLoading = 0x00000000;



// <<< end of configuration section >>>


 MDK-ARM/F030C8T6_Radio_LLCC68.uvprojx

New file
@@ -0,0 +1,1449 @@
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">

  <SchemaVersion>2.1</SchemaVersion>

  <Header>### uVision Project, (C) Keil Software</Header>

  <Targets>
    <Target>
      <TargetName>F030C8T6_Radio_LLCC68</TargetName>
      <ToolsetNumber>0x4</ToolsetNumber>
      <ToolsetName>ARM-ADS</ToolsetName>
      <pCCUsed>5060422::V5.06 update 4 (build 422)::ARMCC</pCCUsed>
      <TargetOption>
        <TargetCommonOption>
          <Device>STM32F030C8Tx</Device>
          <Vendor>STMicroelectronics</Vendor>
          <PackID>Keil.STM32F0xx_DFP.2.1.0</PackID>
          <PackURL>http://www.keil.com/pack/</PackURL>
          <Cpu>IRAM(0x20000000,0x00002000) IROM(0x08000000,0x00010000) CPUTYPE("Cortex-M0") CLOCK(12000000) ELITTLE</Cpu>
          <FlashUtilSpec></FlashUtilSpec>
          <StartupFile></StartupFile>
          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F0xx_64 -FS08000000 -FL010000 -FP0($$Device:STM32F030C8Tx$CMSIS\Flash\STM32F0xx_64.FLM))</FlashDriverDll>
          <DeviceId>0</DeviceId>
          <RegisterFile>$$Device:STM32F030C8Tx$Drivers\CMSIS\Device\ST\STM32F0xx\Include\stm32f0xx.h</RegisterFile>
          <MemoryEnv></MemoryEnv>
          <Cmp></Cmp>
          <Asm></Asm>
          <Linker></Linker>
          <OHString></OHString>
          <InfinionOptionDll></InfinionOptionDll>
          <SLE66CMisc></SLE66CMisc>
          <SLE66AMisc></SLE66AMisc>
          <SLE66LinkerMisc></SLE66LinkerMisc>
          <SFDFile>$$Device:STM32F030C8Tx$CMSIS\SVD\STM32F0x0.svd</SFDFile>
          <bCustSvd>0</bCustSvd>
          <UseEnv>0</UseEnv>
          <BinPath></BinPath>
          <IncludePath></IncludePath>
          <LibPath></LibPath>
          <RegisterFilePath></RegisterFilePath>
          <DBRegisterFilePath></DBRegisterFilePath>
          <TargetStatus>
            <Error>0</Error>
            <ExitCodeStop>0</ExitCodeStop>
            <ButtonStop>0</ButtonStop>
            <NotGenerated>0</NotGenerated>
            <InvalidFlash>1</InvalidFlash>
          </TargetStatus>
          <OutputDirectory>F030C8T6_Test2\</OutputDirectory>
          <OutputName>F030C8T6_Radio_LLCC68</OutputName>
          <CreateExecutable>1</CreateExecutable>
          <CreateLib>0</CreateLib>
          <CreateHexFile>1</CreateHexFile>
          <DebugInformation>1</DebugInformation>
          <BrowseInformation>1</BrowseInformation>
          <ListingPath>.\F030C8T6_Test2\</ListingPath>
          <HexFormatSelection>1</HexFormatSelection>
          <Merge32K>0</Merge32K>
          <CreateBatchFile>0</CreateBatchFile>
          <BeforeCompile>
            <RunUserProg1>0</RunUserProg1>
            <RunUserProg2>0</RunUserProg2>
            <UserProg1Name></UserProg1Name>
            <UserProg2Name></UserProg2Name>
            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
            <nStopU1X>0</nStopU1X>
            <nStopU2X>0</nStopU2X>
          </BeforeCompile>
          <BeforeMake>
            <RunUserProg1>0</RunUserProg1>
            <RunUserProg2>0</RunUserProg2>
            <UserProg1Name></UserProg1Name>
            <UserProg2Name></UserProg2Name>
            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
            <nStopB1X>0</nStopB1X>
            <nStopB2X>0</nStopB2X>
          </BeforeMake>
          <AfterMake>
            <RunUserProg1>0</RunUserProg1>
            <RunUserProg2>0</RunUserProg2>
            <UserProg1Name></UserProg1Name>
            <UserProg2Name></UserProg2Name>
            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
            <nStopA1X>0</nStopA1X>
            <nStopA2X>0</nStopA2X>
          </AfterMake>
          <SelectedForBatchBuild>0</SelectedForBatchBuild>
          <SVCSIdString></SVCSIdString>
        </TargetCommonOption>
        <CommonProperty>
          <UseCPPCompiler>0</UseCPPCompiler>
          <RVCTCodeConst>0</RVCTCodeConst>
          <RVCTZI>0</RVCTZI>
          <RVCTOtherData>0</RVCTOtherData>
          <ModuleSelection>0</ModuleSelection>
          <IncludeInBuild>1</IncludeInBuild>
          <AlwaysBuild>0</AlwaysBuild>
          <GenerateAssemblyFile>0</GenerateAssemblyFile>
          <AssembleAssemblyFile>0</AssembleAssemblyFile>
          <PublicsOnly>0</PublicsOnly>
          <StopOnExitCode>3</StopOnExitCode>
          <CustomArgument></CustomArgument>
          <IncludeLibraryModules></IncludeLibraryModules>
          <ComprImg>0</ComprImg>
        </CommonProperty>
        <DllOption>
          <SimDllName>SARMCM3.DLL</SimDllName>
          <SimDllArguments> -REMAP </SimDllArguments>
          <SimDlgDll>DARMCM1.DLL</SimDlgDll>
          <SimDlgDllArguments>-pCM0</SimDlgDllArguments>
          <TargetDllName>SARMCM3.DLL</TargetDllName>
          <TargetDllArguments> </TargetDllArguments>
          <TargetDlgDll>TARMCM1.DLL</TargetDlgDll>
          <TargetDlgDllArguments>-pCM0</TargetDlgDllArguments>
        </DllOption>
        <DebugOption>
          <OPTHX>
            <HexSelection>1</HexSelection>
            <HexRangeLowAddress>0</HexRangeLowAddress>
            <HexRangeHighAddress>0</HexRangeHighAddress>
            <HexOffset>0</HexOffset>
            <Oh166RecLen>16</Oh166RecLen>
          </OPTHX>
        </DebugOption>
        <Utilities>
          <Flash1>
            <UseTargetDll>1</UseTargetDll>
            <UseExternalTool>0</UseExternalTool>
            <RunIndependent>0</RunIndependent>
            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
            <Capability>1</Capability>
            <DriverSelection>4096</DriverSelection>
          </Flash1>
          <bUseTDR>1</bUseTDR>
          <Flash2>BIN\UL2CM3.DLL</Flash2>
          <Flash3>"" ()</Flash3>
          <Flash4></Flash4>
          <pFcarmOut></pFcarmOut>
          <pFcarmGrp></pFcarmGrp>
          <pFcArmRoot></pFcArmRoot>
          <FcArmLst>0</FcArmLst>
        </Utilities>
        <TargetArmAds>
          <ArmAdsMisc>
            <GenerateListings>0</GenerateListings>
            <asHll>1</asHll>
            <asAsm>1</asAsm>
            <asMacX>1</asMacX>
            <asSyms>1</asSyms>
            <asFals>1</asFals>
            <asDbgD>1</asDbgD>
            <asForm>1</asForm>
            <ldLst>0</ldLst>
            <ldmm>1</ldmm>
            <ldXref>1</ldXref>
            <BigEnd>0</BigEnd>
            <AdsALst>1</AdsALst>
            <AdsACrf>1</AdsACrf>
            <AdsANop>0</AdsANop>
            <AdsANot>0</AdsANot>
            <AdsLLst>1</AdsLLst>
            <AdsLmap>1</AdsLmap>
            <AdsLcgr>1</AdsLcgr>
            <AdsLsym>1</AdsLsym>
            <AdsLszi>1</AdsLszi>
            <AdsLtoi>1</AdsLtoi>
            <AdsLsun>1</AdsLsun>
            <AdsLven>1</AdsLven>
            <AdsLsxf>1</AdsLsxf>
            <RvctClst>0</RvctClst>
            <GenPPlst>0</GenPPlst>
            <AdsCpuType>"Cortex-M0"</AdsCpuType>
            <RvctDeviceName></RvctDeviceName>
            <mOS>0</mOS>
            <uocRom>0</uocRom>
            <uocRam>0</uocRam>
            <hadIROM>1</hadIROM>
            <hadIRAM>1</hadIRAM>
            <hadXRAM>0</hadXRAM>
            <uocXRam>0</uocXRam>
            <RvdsVP>0</RvdsVP>
            <hadIRAM2>0</hadIRAM2>
            <hadIROM2>0</hadIROM2>
            <StupSel>8</StupSel>
            <useUlib>1</useUlib>
            <EndSel>0</EndSel>
            <uLtcg>0</uLtcg>
            <nSecure>0</nSecure>
            <RoSelD>3</RoSelD>
            <RwSelD>3</RwSelD>
            <CodeSel>0</CodeSel>
            <OptFeed>0</OptFeed>
            <NoZi1>0</NoZi1>
            <NoZi2>0</NoZi2>
            <NoZi3>0</NoZi3>
            <NoZi4>0</NoZi4>
            <NoZi5>0</NoZi5>
            <Ro1Chk>0</Ro1Chk>
            <Ro2Chk>0</Ro2Chk>
            <Ro3Chk>0</Ro3Chk>
            <Ir1Chk>1</Ir1Chk>
            <Ir2Chk>0</Ir2Chk>
            <Ra1Chk>0</Ra1Chk>
            <Ra2Chk>0</Ra2Chk>
            <Ra3Chk>0</Ra3Chk>
            <Im1Chk>1</Im1Chk>
            <Im2Chk>0</Im2Chk>
            <OnChipMemories>
              <Ocm1>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </Ocm1>
              <Ocm2>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </Ocm2>
              <Ocm3>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </Ocm3>
              <Ocm4>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </Ocm4>
              <Ocm5>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </Ocm5>
              <Ocm6>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </Ocm6>
              <IRAM>
                <Type>0</Type>
                <StartAddress>0x20000000</StartAddress>
                <Size>0x2000</Size>
              </IRAM>
              <IROM>
                <Type>1</Type>
                <StartAddress>0x8000000</StartAddress>
                <Size>0x10000</Size>
              </IROM>
              <XRAM>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </XRAM>
              <OCR_RVCT1>
                <Type>1</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT1>
              <OCR_RVCT2>
                <Type>1</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT2>
              <OCR_RVCT3>
                <Type>1</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT3>
              <OCR_RVCT4>
                <Type>1</Type>
                <StartAddress>0x8000000</StartAddress>
                <Size>0x10000</Size>
              </OCR_RVCT4>
              <OCR_RVCT5>
                <Type>1</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT5>
              <OCR_RVCT6>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT6>
              <OCR_RVCT7>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT7>
              <OCR_RVCT8>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT8>
              <OCR_RVCT9>
                <Type>0</Type>
                <StartAddress>0x20000000</StartAddress>
                <Size>0x2000</Size>
              </OCR_RVCT9>
              <OCR_RVCT10>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT10>
            </OnChipMemories>
            <RvctStartVector></RvctStartVector>
          </ArmAdsMisc>
          <Cads>
            <interw>1</interw>
            <Optim>4</Optim>
            <oTime>0</oTime>
            <SplitLS>0</SplitLS>
            <OneElfS>1</OneElfS>
            <Strict>0</Strict>
            <EnumInt>0</EnumInt>
            <PlainCh>0</PlainCh>
            <Ropi>0</Ropi>
            <Rwpi>0</Rwpi>
            <wLevel>2</wLevel>
            <uThumb>0</uThumb>
            <uSurpInc>0</uSurpInc>
            <uC99>1</uC99>
            <useXO>0</useXO>
            <v6Lang>1</v6Lang>
            <v6LangP>1</v6LangP>
            <vShortEn>1</vShortEn>
            <vShortWch>1</vShortWch>
            <v6Lto>0</v6Lto>
            <v6WtE>0</v6WtE>
            <v6Rtti>0</v6Rtti>
            <VariousControls>
              <MiscControls></MiscControls>
              <Define>USE_FULL_LL_DRIVER,USE_HAL_DRIVER</Define>
              <Undefine></Undefine>
              <IncludePath>../Inc;../Src;../Drivers/STM32F0xx_HAL_Driver/Inc;../Drivers/CMSIS/Device/ST/STM32F0xx/Include;../Drivers/CMSIS/Include;../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy;./Radio/Inc;./;../src/radio/inc</IncludePath>
            </VariousControls>
          </Cads>
          <Aads>
            <interw>1</interw>
            <Ropi>0</Ropi>
            <Rwpi>0</Rwpi>
            <thumb>0</thumb>
            <SplitLS>0</SplitLS>
            <SwStkChk>0</SwStkChk>
            <NoWarn>0</NoWarn>
            <uSurpInc>0</uSurpInc>
            <useXO>0</useXO>
            <uClangAs>0</uClangAs>
            <VariousControls>
              <MiscControls></MiscControls>
              <Define></Define>
              <Undefine></Undefine>
              <IncludePath></IncludePath>
            </VariousControls>
          </Aads>
          <LDads>
            <umfTarg>1</umfTarg>
            <Ropi>0</Ropi>
            <Rwpi>0</Rwpi>
            <noStLib>0</noStLib>
            <RepFail>1</RepFail>
            <useFile>0</useFile>
            <TextAddressRange>0x08000000</TextAddressRange>
            <DataAddressRange>0x20000000</DataAddressRange>
            <pXoBase></pXoBase>
            <ScatterFile></ScatterFile>
            <IncludeLibs></IncludeLibs>
            <IncludeLibsPath></IncludeLibsPath>
            <Misc></Misc>
            <LinkerInputFile></LinkerInputFile>
            <DisabledWarnings></DisabledWarnings>
          </LDads>
        </TargetArmAds>
      </TargetOption>
      <Groups>
        <Group>
          <GroupName>Application/MDK-ARM</GroupName>
          <Files>
            <File>
              <FileName>startup_stm32f030x8.s</FileName>
              <FileType>2</FileType>
              <FilePath>.\startup_stm32f030x8.s</FilePath>
            </File>
          </Files>
        </Group>
        <Group>
          <GroupName>Application/User</GroupName>
          <Files>
            <File>
              <FileName>functions.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\functions.c</FilePath>
            </File>
            <File>
              <FileName>GlobalDef.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\GlobalDef.c</FilePath>
            </File>
            <File>
              <FileName>MyQueue.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\MyQueue.c</FilePath>
            </File>
            <File>
              <FileName>shell.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\shell.c</FilePath>
            </File>
            <File>
              <FileName>main.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Src/main.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_it.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Src/stm32f0xx_it.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_msp.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Src/stm32f0xx_hal_msp.c</FilePath>
            </File>
            <File>
              <FileName>BSP.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\BSP.c</FilePath>
            </File>
            <File>
              <FileName>PLCfunctions.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\PLCfunctions.c</FilePath>
            </File>
            <File>
              <FileName>KMachine.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\KMachine.c</FilePath>
            </File>
            <File>
              <FileName>KBus.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\KBus.c</FilePath>
            </File>
            <File>
              <FileName>KLink.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\KLink.c</FilePath>
            </File>
            <File>
              <FileName>ModbusRTU.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\ModbusRTU.c</FilePath>
            </File>
            <File>
              <FileName>delay.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\delay.c</FilePath>
            </File>
            <File>
              <FileName>gpio.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\gpio.c</FilePath>
            </File>
            <File>
              <FileName>spi.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\spi.c</FilePath>
            </File>
            <File>
              <FileName>KWireLess.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\KWireLess.c</FilePath>
            </File>
            <File>
              <FileName>debug.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\debug.c</FilePath>
            </File>
          </Files>
        </Group>
        <Group>
          <GroupName>Drivers/CMSIS</GroupName>
          <Files>
            <File>
              <FileName>system_stm32f0xx.c</FileName>
              <FileType>1</FileType>
              <FilePath>..//Src/system_stm32f0xx.c</FilePath>
            </File>
          </Files>
        </Group>
        <Group>
          <GroupName>Drivers/STM32F0xx_HAL_Driver</GroupName>
          <Files>
            <File>
              <FileName>stm32f0xx_ll_gpio.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_gpio.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_exti.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_exti.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_adc.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_adc.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_dma.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_dma.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_spi.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_spi.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_tim.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_tim_ex.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_usart.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_usart.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_rcc.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_rcc.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_rcc.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_rcc_ex.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_i2c.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_i2c_ex.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_gpio.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_dma.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_cortex.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_pwr.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_pwr_ex.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_flash.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_flash_ex.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_utils.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_utils.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_tim.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_ll_tim.c</FilePath>
            </File>
          </Files>
        </Group>
        <Group>
          <GroupName>Drivers/W5500</GroupName>
          <Files>
            <File>
              <FileName>socket.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Ethernet\socket.c</FilePath>
            </File>
            <File>
              <FileName>wizchip_conf.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Ethernet\wizchip_conf.c</FilePath>
            </File>
            <File>
              <FileName>dns.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Internet\DNS\dns.c</FilePath>
            </File>
            <File>
              <FileName>dhcp.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Internet\DHCP\dhcp.c</FilePath>
            </File>
            <File>
              <FileName>w5500.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Ethernet\W5500\w5500.c</FilePath>
            </File>
            <File>
              <FileName>w5500_port.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\w5500_port.c</FilePath>
            </File>
            <File>
              <FileName>loopback.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Ethernet\loopback.c</FilePath>
            </File>
          </Files>
        </Group>
        <Group>
          <GroupName>Radio</GroupName>
          <Files>
            <File>
              <FileName>crc.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Radio\src\crc.c</FilePath>
            </File>
            <File>
              <FileName>radio.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Radio\src\radio.c</FilePath>
            </File>
            <File>
              <FileName>sx126x.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Radio\src\sx126x.c</FilePath>
            </File>
            <File>
              <FileName>sx126x-board.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Radio\src\sx126x-board.c</FilePath>
            </File>
          </Files>
        </Group>
        <Group>
          <GroupName>Boot</GroupName>
          <GroupOption>
            <CommonProperty>
              <UseCPPCompiler>0</UseCPPCompiler>
              <RVCTCodeConst>0</RVCTCodeConst>
              <RVCTZI>0</RVCTZI>
              <RVCTOtherData>0</RVCTOtherData>
              <ModuleSelection>0</ModuleSelection>
              <IncludeInBuild>0</IncludeInBuild>
              <AlwaysBuild>2</AlwaysBuild>
              <GenerateAssemblyFile>2</GenerateAssemblyFile>
              <AssembleAssemblyFile>2</AssembleAssemblyFile>
              <PublicsOnly>2</PublicsOnly>
              <StopOnExitCode>11</StopOnExitCode>
              <CustomArgument></CustomArgument>
              <IncludeLibraryModules></IncludeLibraryModules>
              <ComprImg>1</ComprImg>
            </CommonProperty>
            <GroupArmAds>
              <Cads>
                <interw>2</interw>
                <Optim>0</Optim>
                <oTime>2</oTime>
                <SplitLS>2</SplitLS>
                <OneElfS>2</OneElfS>
                <Strict>2</Strict>
                <EnumInt>2</EnumInt>
                <PlainCh>2</PlainCh>
                <Ropi>2</Ropi>
                <Rwpi>2</Rwpi>
                <wLevel>0</wLevel>
                <uThumb>2</uThumb>
                <uSurpInc>2</uSurpInc>
                <uC99>2</uC99>
                <useXO>2</useXO>
                <v6Lang>0</v6Lang>
                <v6LangP>0</v6LangP>
                <vShortEn>2</vShortEn>
                <vShortWch>2</vShortWch>
                <v6Lto>2</v6Lto>
                <v6WtE>2</v6WtE>
                <v6Rtti>2</v6Rtti>
                <VariousControls>
                  <MiscControls></MiscControls>
                  <Define></Define>
                  <Undefine></Undefine>
                  <IncludePath></IncludePath>
                </VariousControls>
              </Cads>
              <Aads>
                <interw>2</interw>
                <Ropi>2</Ropi>
                <Rwpi>2</Rwpi>
                <thumb>2</thumb>
                <SplitLS>2</SplitLS>
                <SwStkChk>2</SwStkChk>
                <NoWarn>2</NoWarn>
                <uSurpInc>2</uSurpInc>
                <useXO>2</useXO>
                <uClangAs>2</uClangAs>
                <VariousControls>
                  <MiscControls></MiscControls>
                  <Define></Define>
                  <Undefine></Undefine>
                  <IncludePath></IncludePath>
                </VariousControls>
              </Aads>
            </GroupArmAds>
          </GroupOption>
        </Group>
        <Group>
          <GroupName>::CMSIS</GroupName>
        </Group>
      </Groups>
    </Target>
    <Target>
      <TargetName>BootLoader</TargetName>
      <ToolsetNumber>0x4</ToolsetNumber>
      <ToolsetName>ARM-ADS</ToolsetName>
      <pCCUsed>5060422::V5.06 update 4 (build 422)::ARMCC</pCCUsed>
      <TargetOption>
        <TargetCommonOption>
          <Device>STM32F030C8Tx</Device>
          <Vendor>STMicroelectronics</Vendor>
          <PackID>Keil.STM32F0xx_DFP.2.1.0</PackID>
          <PackURL>http://www.keil.com/pack/</PackURL>
          <Cpu>IRAM(0x20000000,0x00002000) IROM(0x08000000,0x00010000) CPUTYPE("Cortex-M0") CLOCK(12000000) ELITTLE</Cpu>
          <FlashUtilSpec></FlashUtilSpec>
          <StartupFile></StartupFile>
          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F0xx_64 -FS08000000 -FL010000 -FP0($$Device:STM32F030C8Tx$CMSIS\Flash\STM32F0xx_64.FLM))</FlashDriverDll>
          <DeviceId>0</DeviceId>
          <RegisterFile>$$Device:STM32F030C8Tx$Drivers\CMSIS\Device\ST\STM32F0xx\Include\stm32f0xx.h</RegisterFile>
          <MemoryEnv></MemoryEnv>
          <Cmp></Cmp>
          <Asm></Asm>
          <Linker></Linker>
          <OHString></OHString>
          <InfinionOptionDll></InfinionOptionDll>
          <SLE66CMisc></SLE66CMisc>
          <SLE66AMisc></SLE66AMisc>
          <SLE66LinkerMisc></SLE66LinkerMisc>
          <SFDFile>$$Device:STM32F030C8Tx$CMSIS\SVD\STM32F0x0.svd</SFDFile>
          <bCustSvd>0</bCustSvd>
          <UseEnv>0</UseEnv>
          <BinPath></BinPath>
          <IncludePath></IncludePath>
          <LibPath></LibPath>
          <RegisterFilePath></RegisterFilePath>
          <DBRegisterFilePath></DBRegisterFilePath>
          <TargetStatus>
            <Error>0</Error>
            <ExitCodeStop>0</ExitCodeStop>
            <ButtonStop>0</ButtonStop>
            <NotGenerated>0</NotGenerated>
            <InvalidFlash>1</InvalidFlash>
          </TargetStatus>
          <OutputDirectory>F030C8T6_Test2\</OutputDirectory>
          <OutputName>F030C8T6_Radio_LLCC68</OutputName>
          <CreateExecutable>1</CreateExecutable>
          <CreateLib>0</CreateLib>
          <CreateHexFile>1</CreateHexFile>
          <DebugInformation>1</DebugInformation>
          <BrowseInformation>1</BrowseInformation>
          <ListingPath>.\F030C8T6_Test2\</ListingPath>
          <HexFormatSelection>1</HexFormatSelection>
          <Merge32K>0</Merge32K>
          <CreateBatchFile>0</CreateBatchFile>
          <BeforeCompile>
            <RunUserProg1>0</RunUserProg1>
            <RunUserProg2>0</RunUserProg2>
            <UserProg1Name></UserProg1Name>
            <UserProg2Name></UserProg2Name>
            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
            <nStopU1X>0</nStopU1X>
            <nStopU2X>0</nStopU2X>
          </BeforeCompile>
          <BeforeMake>
            <RunUserProg1>0</RunUserProg1>
            <RunUserProg2>0</RunUserProg2>
            <UserProg1Name></UserProg1Name>
            <UserProg2Name></UserProg2Name>
            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
            <nStopB1X>0</nStopB1X>
            <nStopB2X>0</nStopB2X>
          </BeforeMake>
          <AfterMake>
            <RunUserProg1>0</RunUserProg1>
            <RunUserProg2>0</RunUserProg2>
            <UserProg1Name></UserProg1Name>
            <UserProg2Name></UserProg2Name>
            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
            <nStopA1X>0</nStopA1X>
            <nStopA2X>0</nStopA2X>
          </AfterMake>
          <SelectedForBatchBuild>0</SelectedForBatchBuild>
          <SVCSIdString></SVCSIdString>
        </TargetCommonOption>
        <CommonProperty>
          <UseCPPCompiler>0</UseCPPCompiler>
          <RVCTCodeConst>0</RVCTCodeConst>
          <RVCTZI>0</RVCTZI>
          <RVCTOtherData>0</RVCTOtherData>
          <ModuleSelection>0</ModuleSelection>
          <IncludeInBuild>1</IncludeInBuild>
          <AlwaysBuild>0</AlwaysBuild>
          <GenerateAssemblyFile>0</GenerateAssemblyFile>
          <AssembleAssemblyFile>0</AssembleAssemblyFile>
          <PublicsOnly>0</PublicsOnly>
          <StopOnExitCode>3</StopOnExitCode>
          <CustomArgument></CustomArgument>
          <IncludeLibraryModules></IncludeLibraryModules>
          <ComprImg>0</ComprImg>
        </CommonProperty>
        <DllOption>
          <SimDllName>SARMCM3.DLL</SimDllName>
          <SimDllArguments> -REMAP </SimDllArguments>
          <SimDlgDll>DARMCM1.DLL</SimDlgDll>
          <SimDlgDllArguments>-pCM0</SimDlgDllArguments>
          <TargetDllName>SARMCM3.DLL</TargetDllName>
          <TargetDllArguments> </TargetDllArguments>
          <TargetDlgDll>TARMCM1.DLL</TargetDlgDll>
          <TargetDlgDllArguments>-pCM0</TargetDlgDllArguments>
        </DllOption>
        <DebugOption>
          <OPTHX>
            <HexSelection>1</HexSelection>
            <HexRangeLowAddress>0</HexRangeLowAddress>
            <HexRangeHighAddress>0</HexRangeHighAddress>
            <HexOffset>0</HexOffset>
            <Oh166RecLen>16</Oh166RecLen>
          </OPTHX>
        </DebugOption>
        <Utilities>
          <Flash1>
            <UseTargetDll>1</UseTargetDll>
            <UseExternalTool>0</UseExternalTool>
            <RunIndependent>0</RunIndependent>
            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
            <Capability>1</Capability>
            <DriverSelection>4096</DriverSelection>
          </Flash1>
          <bUseTDR>1</bUseTDR>
          <Flash2>BIN\UL2CM3.DLL</Flash2>
          <Flash3>"" ()</Flash3>
          <Flash4></Flash4>
          <pFcarmOut></pFcarmOut>
          <pFcarmGrp></pFcarmGrp>
          <pFcArmRoot></pFcArmRoot>
          <FcArmLst>0</FcArmLst>
        </Utilities>
        <TargetArmAds>
          <ArmAdsMisc>
            <GenerateListings>0</GenerateListings>
            <asHll>1</asHll>
            <asAsm>1</asAsm>
            <asMacX>1</asMacX>
            <asSyms>1</asSyms>
            <asFals>1</asFals>
            <asDbgD>1</asDbgD>
            <asForm>1</asForm>
            <ldLst>0</ldLst>
            <ldmm>1</ldmm>
            <ldXref>1</ldXref>
            <BigEnd>0</BigEnd>
            <AdsALst>1</AdsALst>
            <AdsACrf>1</AdsACrf>
            <AdsANop>0</AdsANop>
            <AdsANot>0</AdsANot>
            <AdsLLst>1</AdsLLst>
            <AdsLmap>1</AdsLmap>
            <AdsLcgr>1</AdsLcgr>
            <AdsLsym>1</AdsLsym>
            <AdsLszi>1</AdsLszi>
            <AdsLtoi>1</AdsLtoi>
            <AdsLsun>1</AdsLsun>
            <AdsLven>1</AdsLven>
            <AdsLsxf>1</AdsLsxf>
            <RvctClst>0</RvctClst>
            <GenPPlst>0</GenPPlst>
            <AdsCpuType>"Cortex-M0"</AdsCpuType>
            <RvctDeviceName></RvctDeviceName>
            <mOS>0</mOS>
            <uocRom>0</uocRom>
            <uocRam>0</uocRam>
            <hadIROM>1</hadIROM>
            <hadIRAM>1</hadIRAM>
            <hadXRAM>0</hadXRAM>
            <uocXRam>0</uocXRam>
            <RvdsVP>0</RvdsVP>
            <hadIRAM2>0</hadIRAM2>
            <hadIROM2>0</hadIROM2>
            <StupSel>8</StupSel>
            <useUlib>1</useUlib>
            <EndSel>0</EndSel>
            <uLtcg>0</uLtcg>
            <nSecure>0</nSecure>
            <RoSelD>3</RoSelD>
            <RwSelD>3</RwSelD>
            <CodeSel>0</CodeSel>
            <OptFeed>0</OptFeed>
            <NoZi1>0</NoZi1>
            <NoZi2>0</NoZi2>
            <NoZi3>0</NoZi3>
            <NoZi4>0</NoZi4>
            <NoZi5>0</NoZi5>
            <Ro1Chk>0</Ro1Chk>
            <Ro2Chk>0</Ro2Chk>
            <Ro3Chk>0</Ro3Chk>
            <Ir1Chk>1</Ir1Chk>
            <Ir2Chk>0</Ir2Chk>
            <Ra1Chk>0</Ra1Chk>
            <Ra2Chk>0</Ra2Chk>
            <Ra3Chk>0</Ra3Chk>
            <Im1Chk>1</Im1Chk>
            <Im2Chk>0</Im2Chk>
            <OnChipMemories>
              <Ocm1>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </Ocm1>
              <Ocm2>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </Ocm2>
              <Ocm3>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </Ocm3>
              <Ocm4>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </Ocm4>
              <Ocm5>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </Ocm5>
              <Ocm6>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </Ocm6>
              <IRAM>
                <Type>0</Type>
                <StartAddress>0x20000000</StartAddress>
                <Size>0x2000</Size>
              </IRAM>
              <IROM>
                <Type>1</Type>
                <StartAddress>0x8000000</StartAddress>
                <Size>0x10000</Size>
              </IROM>
              <XRAM>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </XRAM>
              <OCR_RVCT1>
                <Type>1</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT1>
              <OCR_RVCT2>
                <Type>1</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT2>
              <OCR_RVCT3>
                <Type>1</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT3>
              <OCR_RVCT4>
                <Type>1</Type>
                <StartAddress>0x8000000</StartAddress>
                <Size>0x10000</Size>
              </OCR_RVCT4>
              <OCR_RVCT5>
                <Type>1</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT5>
              <OCR_RVCT6>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT6>
              <OCR_RVCT7>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT7>
              <OCR_RVCT8>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT8>
              <OCR_RVCT9>
                <Type>0</Type>
                <StartAddress>0x20000000</StartAddress>
                <Size>0x2000</Size>
              </OCR_RVCT9>
              <OCR_RVCT10>
                <Type>0</Type>
                <StartAddress>0x0</StartAddress>
                <Size>0x0</Size>
              </OCR_RVCT10>
            </OnChipMemories>
            <RvctStartVector></RvctStartVector>
          </ArmAdsMisc>
          <Cads>
            <interw>1</interw>
            <Optim>4</Optim>
            <oTime>0</oTime>
            <SplitLS>0</SplitLS>
            <OneElfS>1</OneElfS>
            <Strict>0</Strict>
            <EnumInt>0</EnumInt>
            <PlainCh>0</PlainCh>
            <Ropi>0</Ropi>
            <Rwpi>0</Rwpi>
            <wLevel>2</wLevel>
            <uThumb>0</uThumb>
            <uSurpInc>0</uSurpInc>
            <uC99>1</uC99>
            <useXO>0</useXO>
            <v6Lang>1</v6Lang>
            <v6LangP>1</v6LangP>
            <vShortEn>1</vShortEn>
            <vShortWch>1</vShortWch>
            <v6Lto>0</v6Lto>
            <v6WtE>0</v6WtE>
            <v6Rtti>0</v6Rtti>
            <VariousControls>
              <MiscControls></MiscControls>
              <Define>USE_FULL_LL_DRIVER,USE_HAL_DRIVER</Define>
              <Undefine></Undefine>
              <IncludePath>../Inc;../Src;../Drivers/STM32F0xx_HAL_Driver/Inc;../Drivers/CMSIS/Device/ST/STM32F0xx/Include;../Drivers/CMSIS/Include;../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy;./Radio/Inc;./;../src/radio/inc</IncludePath>
            </VariousControls>
          </Cads>
          <Aads>
            <interw>1</interw>
            <Ropi>0</Ropi>
            <Rwpi>0</Rwpi>
            <thumb>0</thumb>
            <SplitLS>0</SplitLS>
            <SwStkChk>0</SwStkChk>
            <NoWarn>0</NoWarn>
            <uSurpInc>0</uSurpInc>
            <useXO>0</useXO>
            <uClangAs>0</uClangAs>
            <VariousControls>
              <MiscControls></MiscControls>
              <Define></Define>
              <Undefine></Undefine>
              <IncludePath></IncludePath>
            </VariousControls>
          </Aads>
          <LDads>
            <umfTarg>1</umfTarg>
            <Ropi>0</Ropi>
            <Rwpi>0</Rwpi>
            <noStLib>0</noStLib>
            <RepFail>1</RepFail>
            <useFile>0</useFile>
            <TextAddressRange>0x08000000</TextAddressRange>
            <DataAddressRange>0x20000000</DataAddressRange>
            <pXoBase></pXoBase>
            <ScatterFile></ScatterFile>
            <IncludeLibs></IncludeLibs>
            <IncludeLibsPath></IncludeLibsPath>
            <Misc></Misc>
            <LinkerInputFile></LinkerInputFile>
            <DisabledWarnings></DisabledWarnings>
          </LDads>
        </TargetArmAds>
      </TargetOption>
      <Groups>
        <Group>
          <GroupName>Application/MDK-ARM</GroupName>
          <Files>
            <File>
              <FileName>startup_stm32f030x8.s</FileName>
              <FileType>2</FileType>
              <FilePath>.\startup_stm32f030x8.s</FilePath>
            </File>
          </Files>
        </Group>
        <Group>
          <GroupName>Application/User</GroupName>
          <Files>
            <File>
              <FileName>functions.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\functions.c</FilePath>
            </File>
            <File>
              <FileName>GlobalDef.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\GlobalDef.c</FilePath>
            </File>
            <File>
              <FileName>MyQueue.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\MyQueue.c</FilePath>
            </File>
            <File>
              <FileName>shell.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\shell.c</FilePath>
            </File>
            <File>
              <FileName>main.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Src/main.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_it.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Src/stm32f0xx_it.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_msp.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Src/stm32f0xx_hal_msp.c</FilePath>
            </File>
            <File>
              <FileName>BSP.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\BSP.c</FilePath>
            </File>
            <File>
              <FileName>PLCfunctions.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\PLCfunctions.c</FilePath>
            </File>
            <File>
              <FileName>KMachine.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\KMachine.c</FilePath>
            </File>
            <File>
              <FileName>KBus.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\KBus.c</FilePath>
            </File>
            <File>
              <FileName>KLink.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\KLink.c</FilePath>
            </File>
            <File>
              <FileName>ModbusRTU.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\ModbusRTU.c</FilePath>
            </File>
            <File>
              <FileName>delay.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\delay.c</FilePath>
            </File>
            <File>
              <FileName>gpio.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\gpio.c</FilePath>
            </File>
            <File>
              <FileName>spi.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\spi.c</FilePath>
            </File>
            <File>
              <FileName>KWireLess.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\KWireLess.c</FilePath>
            </File>
            <File>
              <FileName>debug.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\debug.c</FilePath>
            </File>
          </Files>
        </Group>
        <Group>
          <GroupName>Drivers/CMSIS</GroupName>
          <Files>
            <File>
              <FileName>system_stm32f0xx.c</FileName>
              <FileType>1</FileType>
              <FilePath>..//Src/system_stm32f0xx.c</FilePath>
            </File>
          </Files>
        </Group>
        <Group>
          <GroupName>Drivers/STM32F0xx_HAL_Driver</GroupName>
          <Files>
            <File>
              <FileName>stm32f0xx_ll_gpio.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_gpio.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_exti.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_exti.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_adc.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_adc.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_dma.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_dma.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_spi.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_spi.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_tim.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_tim_ex.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_usart.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_usart.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_rcc.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_rcc.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_rcc.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_rcc_ex.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rcc_ex.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_i2c.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_i2c_ex.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_gpio.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_gpio.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_dma.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_cortex.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_cortex.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_pwr.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_pwr_ex.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_pwr_ex.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_flash.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_hal_flash_ex.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_utils.c</FileName>
              <FileType>1</FileType>
              <FilePath>../Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_utils.c</FilePath>
            </File>
            <File>
              <FileName>stm32f0xx_ll_tim.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_ll_tim.c</FilePath>
            </File>
          </Files>
        </Group>
        <Group>
          <GroupName>Drivers/W5500</GroupName>
          <Files>
            <File>
              <FileName>socket.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Ethernet\socket.c</FilePath>
            </File>
            <File>
              <FileName>wizchip_conf.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Ethernet\wizchip_conf.c</FilePath>
            </File>
            <File>
              <FileName>dns.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Internet\DNS\dns.c</FilePath>
            </File>
            <File>
              <FileName>dhcp.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Internet\DHCP\dhcp.c</FilePath>
            </File>
            <File>
              <FileName>w5500.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Ethernet\W5500\w5500.c</FilePath>
            </File>
            <File>
              <FileName>w5500_port.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\w5500_port.c</FilePath>
            </File>
            <File>
              <FileName>loopback.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Ethernet\loopback.c</FilePath>
            </File>
          </Files>
        </Group>
        <Group>
          <GroupName>Radio</GroupName>
          <Files>
            <File>
              <FileName>crc.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Radio\src\crc.c</FilePath>
            </File>
            <File>
              <FileName>radio.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Radio\src\radio.c</FilePath>
            </File>
            <File>
              <FileName>sx126x.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Radio\src\sx126x.c</FilePath>
            </File>
            <File>
              <FileName>sx126x-board.c</FileName>
              <FileType>1</FileType>
              <FilePath>..\Src\Radio\src\sx126x-board.c</FilePath>
            </File>
          </Files>
        </Group>
        <Group>
          <GroupName>Boot</GroupName>
        </Group>
        <Group>
          <GroupName>::CMSIS</GroupName>
        </Group>
      </Groups>
    </Target>
  </Targets>

  <RTE>
    <apis/>
    <components>
      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.1.1" condition="ARMv6_7_8-M Device">
        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/>
        <targetInfos>
          <targetInfo name="BootLoader"/>
          <targetInfo name="F030C8T6_Radio_LLCC68"/>
        </targetInfos>
      </component>
    </components>
    <files/>
  </RTE>

</Project>

 MDK-ARM/F030C8T6_Test2.uvoptx

File was deleted

 MDK-ARM/F030C8T6_Test2.uvprojx

File was deleted

 MDK-ARM/JLinkLog.txt

Diff too large

 MDK-ARM/RTE/_BootLoader/RTE_Components.h

New file
@@ -0,0 +1,20 @@


/*

 * Auto generated Run-Time-Environment Component Configuration File

 *      *** Do not modify ! ***

 *

 * Project: 'F030C8T6_Radio_LLCC68' 
 * Target:  'BootLoader' 
 */



#ifndef RTE_COMPONENTS_H

#define RTE_COMPONENTS_H





/*

 * Define the Device Header File: 
 */

#define CMSIS_device_header "stm32f0xx.h"





#endif /* RTE_COMPONENTS_H */


 MDK-ARM/RTE/_F030C8T6_Radio_LLCC68/RTE_Components.h

New file
@@ -0,0 +1,20 @@


/*

 * Auto generated Run-Time-Environment Component Configuration File

 *      *** Do not modify ! ***

 *

 * Project: 'F030C8T6_Radio_LLCC68' 
 * Target:  'F030C8T6_Radio_LLCC68' 
 */



#ifndef RTE_COMPONENTS_H

#define RTE_COMPONENTS_H





/*

 * Define the Device Header File: 
 */

#define CMSIS_device_header "stm32f0xx.h"





#endif /* RTE_COMPONENTS_H */


 MDK-ARM/RTE/_F030C8T6_Test2/RTE_Components.h

@@ -3,7 +3,7 @@
 * Auto generated Run-Time-Environment Component Configuration File

 *      *** Do not modify ! ***

 *

 * Project: 'F030C8T6_Test2' 
 * Project: 'F030C8T6_Radio_LLCC68' 
 * Target:  'F030C8T6_Test2' 

 */




 Src/KWireLess.c

@@ -12,9 +12,9 @@




/**************************************************************************************************************************************

Demo 程序流程  RadioEnableMaster=true  为主机端，主机端发送一个"PING"数据后切换到接收，等待从机返回的应答"PONG"数据LED闪烁

Demo 程序流程  RadioEnableMaster=true  为主机端，主机端发送一个"PING"数据后切换到接收，等待从机返回的应答"PONG"数据LED闪烁



               RadioEnableMaster=false 为从机端，从机端接收到主机端发过来的"PING"数据后LED闪烁并发送一个"PONG"数据作为应答

               RadioEnableMaster=false 为从机端，从机端接收到主机端发过来的"PING"数据后LED闪烁并发送一个"PONG"数据作为应答

***************************************************************************************************************************************/



//#define USE_MODEM_LORA

@@ -32,7 +32,7 @@


#elif defined( REGION_CN779 )



#define RF_FREQUENCY                                433100000 // Hz

#define RF_FREQUENCY                                433000000 // Hz



#elif defined( REGION_EU868 )



@@ -60,12 +60,13 @@


#endif



#define nChannelBandwidth                                                     100000 // Hz

#define TX_OUTPUT_POWER                             22        // 22 dBm



extern bool IrqFired;



bool RadioEnableMaster=true;//主从选择



bool RadioEnableMaster=true;//主从选择

uint32_t nRadioChannel=0;

uint16_t  crc_value;

/*!

 * Radio events function pointer

@@ -132,14 +133,14 @@


void LedToggle(void)

{

//  GPIO_WriteBit( LED1_PORT, LED1_PIN,Bit_RESET);//LED闪烁

//  GPIO_WriteBit( LED1_PORT, LED1_PIN,Bit_RESET);//LED闪烁

//  HAL_Delay_nMS(10);

//  GPIO_WriteBit( LED1_PORT, LED1_PIN,Bit_SET);

    

        LL_GPIO_TogglePin(GPIOC,LL_GPIO_PIN_13);        

}



int KWireLessInit(bool bRadioEnableMaster)

int KWireLessInit(bool bRadioEnableMaster, uint32_t nChn)

{

    

        RadioEnableMaster = bRadioEnableMaster;

@@ -152,7 +153,8 @@
    

    

    Radio.Init( &RadioEvents );

    Radio.SetChannel( RF_FREQUENCY );

        nRadioChannel = nChn;

    Radio.SetChannel( RF_FREQUENCY + nRadioChannel * nChannelBandwidth );

    

  //  Radio.WriteBuffer(0x06C0,data,2);

   // Radio.ReadBuffer(0x06C0,test,2);

@@ -204,7 +206,7 @@
          

            

            

          crc_value=RadioComputeCRC(TX_Buffer,8,CRC_TYPE_IBM);//计算得出要发送数据包CRC值

          crc_value=RadioComputeCRC(TX_Buffer,8,CRC_TYPE_IBM);//计算得出要发送数据包CRC值

          TX_Buffer[8]=crc_value>>8;

          TX_Buffer[9]=crc_value;

          Radio.Send( TX_Buffer, 10);

@@ -234,7 +236,7 @@
            TX_Buffer[6] = KMem.WY[2]>>8; 

            TX_Buffer[7] = KMem.WY[2]; 

            

            crc_value=RadioComputeCRC(TX_Buffer,len1,CRC_TYPE_IBM);//计算得出要发送数据包CRC值

            crc_value=RadioComputeCRC(TX_Buffer,len1,CRC_TYPE_IBM);//计算得出要发送数据包CRC值

            TX_Buffer[len1]=crc_value>>8;

            TX_Buffer[len1+1]=crc_value;

            Radio.Send( TX_Buffer, len1+2);

@@ -250,7 +252,7 @@
            TX_Buffer[6] = KMem.WX[1]>>8; 

            TX_Buffer[7] = KMem.WX[1]; 

            

            crc_value=RadioComputeCRC(TX_Buffer,len1,CRC_TYPE_IBM);//计算得出要发送数据包CRC值

            crc_value=RadioComputeCRC(TX_Buffer,len1,CRC_TYPE_IBM);//计算得出要发送数据包CRC值

            TX_Buffer[len1]=crc_value>>8;

            TX_Buffer[len1+1]=crc_value;

            Radio.Send( TX_Buffer, len1+2);    

@@ -259,7 +261,7 @@
void OnTxDone( void )

{   

    Radio.Standby();

    Radio.Rx( RX_TIMEOUT_VALUE ); //进入接收

    Radio.Rx( RX_TIMEOUT_VALUE ); //进入接收

        LL_GPIO_TogglePin(GPIOC,LL_GPIO_PIN_14);

            int us2=GetuS();

            KMem.ScanTimeuS=us2-KMem.LastScanTime;

@@ -285,7 +287,7 @@
    {

      if(memcmp(RX_Buffer,PongMsg,4)==0)

      {

        LedToggle();//LED闪烁

        LedToggle();//LED闪烁

                    KMem.WX[1]=(RX_Buffer[4]<<8) + RX_Buffer[5];

                    KMem.WX[2]=(RX_Buffer[6]<<8) + RX_Buffer[7];                

      }

@@ -295,10 +297,13 @@
    {

      if(memcmp(RX_Buffer,PingMsg,4)==0)

      {

        LedToggle();//LED闪烁

        LedToggle();//LED闪烁

        SendPongMsg(size-2);

                KMem.WY[0]=(RX_Buffer[4]<<8) + RX_Buffer[5];

                KMem.WY[1]=(RX_Buffer[6]<<8) + RX_Buffer[7];				
                KMem.WX[1]=(RX_Buffer[4]<<8) + RX_Buffer[5];

                KMem.WX[2]=(RX_Buffer[6]<<8) + RX_Buffer[7];				
				
//                KMem.WY[0]=(RX_Buffer[4]<<8) + RX_Buffer[5];

//                KMem.WY[1]=(RX_Buffer[6]<<8) + RX_Buffer[7];				
      }

      else

      {


 Src/ModbusRTU.c

@@ -86,12 +86,12 @@


int ModBusSlaveCheckPkg(int nChn, void *ptr, uint16_t len1)

{

    if (len1 <=4) return -1;        //包长

    if (len1 <=4) return -1;        //包长

    pModBusRTUReqPkg pPkg = (pModBusRTUReqPkg) ptr;

    if (pPkg->Dst >127) return -2;   //地址码

    if ((pPkg->Cmd&0x7f) > 0x1f) return -3;  //功能码

    uint16_t crc = crc16tablefast(ptr,len1);   //CRC 校验

    if (crc != 0 ) return 4;        //CRC 校验错误

    if (pPkg->Dst >127) return -2;   //地址码

    if ((pPkg->Cmd&0x7f) > 0x1f) return -3;  //功能码

    uint16_t crc = crc16tablefast(ptr,len1);   //CRC 校验

    if (crc != 0 ) return 4;        //CRC 校验错误

    return S_OK;

}




 Src/functions.c

@@ -19,16 +19,16 @@
unsigned int TickPrioduS;    //

volatile unsigned int nCurTick=0;

volatile unsigned int CurTickuS=0;

//volatile unsigned int ThisRunTime=0;        //开机时间

//volatile unsigned int TotalRunTime=0;     //总开机时间

//volatile unsigned int PwrCount=0;                //开机次数

unsigned short ClkuS;                //每个Clk的nS数，

//volatile unsigned int ThisRunTime=0;        //开机时间

//volatile unsigned int TotalRunTime=0;     //总开机时间

//volatile unsigned int PwrCount=0;                //开机次数

unsigned short ClkuS;                //每个Clk的nS数，



int InituS(int TickFreq1)

{

        TickPrioduS=1000000/TickFreq1;    //每个SysTick的微秒数

        CoreClkMHz=HAL_RCC_GetHCLKFreq()/1000000;        //=SystemCoreClock/1000000;每uS的时钟数

        TickPriodClk=SystemCoreClock/TickFreq1;            //每个SysTick的时钟数

        TickPrioduS=1000000/TickFreq1;    //每个SysTick的微秒数

        CoreClkMHz=HAL_RCC_GetHCLKFreq()/1000000;        //=SystemCoreClock/1000000;每uS的时钟数

        TickPriodClk=SystemCoreClock/TickFreq1;            //每个SysTick的时钟数

        ClkuS=(1000000LL*65536)/SystemCoreClock;

        CurTickuS=TickPrioduS+100u;

    return 0;

@@ -732,7 +732,7 @@
void Output595_8(unsigned int cc)

{

//unsigned char i;

;//        74HC595输出程序，输出8位

;//        74HC595输出程序，输出8位

//    cc=~0x3f;

    __disable_irq();

    STRCLK2_1();

@@ -758,7 +758,7 @@
void Output595_16(unsigned int cc)

{

//unsigned char i;

;//        74HC595输出程序，输出8位

;//        74HC595输出程序，输出8位

//    cc=~0x3f;

    __disable_irq();

    STRCLK2_1();

@@ -860,7 +860,7 @@


#if (BOARD_TYPE == 9 || BOARD_TYPE == 10 || BOARD_TYPE == 15 )

//#pragma message("9,10")

    // V4.2 管脚排列向右移动了一位。

    // V4.2 管脚排列向右移动了一位。

#define SRCLK1_0() LL_GPIO_ResetOutputPin(GPIOB,LL_GPIO_PIN_1)

#define SRCLK1_1() LL_GPIO_SetOutputPin(GPIOB,LL_GPIO_PIN_1)

#define STRCLK1_0() LL_GPIO_ResetOutputPin(GPIOB,LL_GPIO_PIN_2)

@@ -869,7 +869,7 @@
#define OE1_1() LL_GPIO_SetOutputPin(GPIOB,LL_GPIO_PIN_10)

#define SER1_0() LL_GPIO_ResetOutputPin(GPIOB,LL_GPIO_PIN_11)

#define SER1_1() LL_GPIO_SetOutputPin(GPIOB,LL_GPIO_PIN_11)

#else        //按照原来的管脚排列

#else        //按照原来的管脚排列

#define SRCLK1_0() LL_GPIO_ResetOutputPin(GPIOB,LL_GPIO_PIN_0)

#define SRCLK1_1() LL_GPIO_SetOutputPin(GPIOB,LL_GPIO_PIN_0)

#define STRCLK1_0() LL_GPIO_ResetOutputPin(GPIOB,LL_GPIO_PIN_1)

@@ -890,7 +890,7 @@
void displayInput(unsigned int cc)

{

//unsigned char i;

;//        74HC595输出程序，输出8位

;//        74HC595输出程序，输出8位

//    cc=~0x3f;

    __disable_irq();

    STRCLK1_1();


 Src/main.c

@@ -188,9 +188,9 @@
  SystemClock_Config();



  /* USER CODE BEGIN SysInit */

    TickFreq=10000;        //Tick频率

    TickFreq=10000;        //Tick频率

    InituS(TickFreq);    

 // HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/TickFreq);    //ÖØж¨ÒåSysTickµÄƵÂÊÎ

 // HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/TickFreq);    //重新定义SysTick的频率�



  /* USER CODE END SysInit */



@@ -305,7 +305,7 @@
    }

    KMem.WX[7]=0x5a;

#if (BOARD_TYPE == 15)

    KWireLessInit(KMem.EffJumperSW&0x20);

    KWireLessInit(KMem.EffJumperSW&0x20,KMem.EffJumperSW&0x1f);

    KWireLessStart();

#endif




 Src/spi.c

@@ -5,11 +5,11 @@
/*    

    SPI_InitTypeDef  SPI_InitStruct;

    

    SPI_InitStruct.SPI_Direction = SPI_Direction_2Lines_FullDuplex;//全双工模式

    SPI_InitStruct.SPI_Direction = SPI_Direction_2Lines_FullDuplex;//全双工模式

    SPI_InitStruct.SPI_Mode = SPI_Mode_Master;

    SPI_InitStruct.SPI_DataSize = SPI_DataSize_8b;

    SPI_InitStruct.SPI_CPHA = SPI_CPHA_1Edge;//第一个边沿

    SPI_InitStruct.SPI_CPOL = SPI_CPOL_Low;//上升沿捕获

    SPI_InitStruct.SPI_CPHA = SPI_CPHA_1Edge;//第一个边沿

    SPI_InitStruct.SPI_CPOL = SPI_CPOL_Low;//上升沿捕获

    SPI_InitStruct.SPI_NSS = SPI_NSS_Soft;

    SPI_InitStruct.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_16; // 6MHz

    SPI_InitStruct.SPI_FirstBit = SPI_FirstBit_MSB;

@@ -32,10 +32,10 @@
uint8_t SpiInOut( uint8_t txBuffer)

{

 /*   

      while( SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_TXE) == RESET);//当发送buffer为空时(说明上一次数据已复制到移位寄存器中)退出,这时可以往buffer里面写数据

      while( SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_TXE) == RESET);//当发送buffer为空时(说明上一次数据已复制到移位寄存器中)退出,这时可以往buffer里面写数据

      SPI_SendData8(SPI2, txBuffer);

    

      while( SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_RXNE) == RESET);//当接收buffer为非空时退出

      while( SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_RXNE) == RESET);//当接收buffer为非空时退出

      return SPI_ReceiveData8(SPI2);

      

  */ 

@@ -58,9 +58,9 @@
    

    for(i=0;i<size;i++)

    {

      while( LL_SPI_IsActiveFlag_TXE(SPI1) == RESET);//当发送buffer为空时(说明上一次数据已复制到移位寄存器中)退出,这时可以往buffer里面写数据

      while( LL_SPI_IsActiveFlag_TXE(SPI1) == RESET);//当发送buffer为空时(说明上一次数据已复制到移位寄存器中)退出,这时可以往buffer里面写数据

      LL_SPI_TransmitData8(SPI1,txBuffer[i]);

      while( LL_SPI_IsActiveFlag_RXNE(SPI1) == RESET);//当接收buffer为非空时退出

      while( LL_SPI_IsActiveFlag_RXNE(SPI1) == RESET);//当接收buffer为非空时退出

      LL_SPI_ReceiveData8( SPI1);    

    }