MultiTerminal1 - Gitblit

			@@ -28,6 +28,10 @@

			IMPLEMENT_DYNCREATE(CMTerm1View, CScrollView)

			/// <summary>
			/// 消息映射
			/// 是 MFC 中用于将 Windows 消息（如鼠标点击、按键等）映射到成员函数的机制。
			/// </summary>
			BEGIN_MESSAGE_MAP(CMTerm1View, CScrollView)
			// 标准打印命令
			ON_COMMAND(ID_FILE_PRINT, &CScrollView::OnFilePrint)
			@@ -102,19 +106,31 @@
			return CScrollView::PreCreateWindow(cs);
			}

			/// <summary>
			/// MFC 中的一个函数，它在视图首次显示之前被调用
			/// </summary>
			void CMTerm1View::OnInitialUpdate()
			{
			CScrollView::OnInitialUpdate();

			//创建了三种不同的字体
			TextFont.CreateFont(13, 0, 0, 0, FW_NORMAL, FALSE, FALSE, 0, ANSI_CHARSET, OUT_DEFAULT_PRECIS, CLIP_DEFAULT_PRECIS, DEFAULT_QUALITY, DEFAULT_PITCH \| FF_ROMAN, _T("宋体"));
			MonTextFont.CreateFont(12, 0, 0, 0, FW_NORMAL, FALSE, FALSE, 0, ANSI_CHARSET, OUT_DEFAULT_PRECIS, CLIP_DEFAULT_PRECIS, DEFAULT_QUALITY, DEFAULT_PITCH \| FF_ROMAN, _T("宋体"));
			AnnoFont.CreateFont(12, 0, 0, 0, FW_NORMAL, FALSE, FALSE, 0, ANSI_CHARSET, OUT_DEFAULT_PRECIS, CLIP_DEFAULT_PRECIS, DEFAULT_QUALITY, DEFAULT_PITCH \| FF_ROMAN, _T("宋体"));

			//获取了状态栏的引用并存储在 m_pStatusBar 成员变量中
			m_pStatusBar = ((CChildFrame *)GetParentFrame())->GetStatusBar();

			CSize sizeTotal;
			// TODO: 计算此视图的合计大小
			sizeTotal.cx = m_LeftMargin + m_CellWidth* m_CellPerLine + m_CellWidth *2;
			sizeTotal.cy = 2000;
			//设置了滚动大小
			SetScrollSizes(MM_TEXT, sizeTotal);
			CString s1;

			CString s1;//没啥用

			//设置了两个定时器，一个间隔为50毫秒，另一个为10毫秒。
			SetTimer(1, 50,NULL);
			SetTimer(2, 10, NULL);

			@@ -130,25 +146,27 @@
			return;

			// TODO: 在此处为本机数据添加绘制代码
			CString s1;
			CString s1;//没啥用

			needReDraw = 1;
			DrawLDSGraph(pDC);
			needReDraw = 0;
			}

			// CMTerm1View 打印

			// CMTerm1View 打印，MFC 函数，用于准备打印。
			BOOL CMTerm1View::OnPreparePrinting(CPrintInfo* pInfo)
			{
			// 默认准备
			return DoPreparePrinting(pInfo);
			}

			// MFC 函数，用于在打印开始之前进行初始化。
			void CMTerm1View::OnBeginPrinting(CDC* /pDC/, CPrintInfo* /pInfo/)
			{
			// TODO: 添加额外的打印前进行的初始化过程
			}

			//MFC 函数，用于在打印结束后进行清理。
			void CMTerm1View::OnEndPrinting(CDC* /pDC/, CPrintInfo* /pInfo/)
			{
			// TODO: 添加打印后进行的清理过程
			@@ -158,16 +176,19 @@
			// CMTerm1View 诊断

			#ifdef _DEBUG
			//函数用于验证对象的有效性。
			void CMTerm1View::AssertValid() const
			{
			CScrollView::AssertValid();
			}
			}

			// 函数用于将对象的内容转储到指定的上下文。
			void CMTerm1View::Dump(CDumpContext& dc) const
			{
			CScrollView::Dump(dc);
			}

			//函数返回与此视图关联的文档对象。
			CMTerm1Doc* CMTerm1View::GetDocument() const // 非调试版本是内联的
			{
			ASSERT(m_pDocument->IsKindOf(RUNTIME_CLASS(CMTerm1Doc)));
			@@ -175,6 +196,7 @@
			}
			#endif //_DEBUG

			//MFC 函数，用于处理视图的创建事件。
			int CMTerm1View::OnCreate(LPCREATESTRUCT lpCreateStruct)
			{
			if (CScrollView::OnCreate(lpCreateStruct) == -1)
			@@ -185,9 +207,13 @@
			return 0;
			}

			/// <summary>
			/// 用于重新绘制视图。
			/// </summary>
			/// <returns></returns>
			int CMTerm1View::DoReDraw()
			{
			// TODO: 在此处添加实现代码.

			CPoint scroll1;
			scroll1 = this->GetScrollPosition();

			@@ -210,6 +236,13 @@
			return 0;
			}

			/// <summary>
			/// 滚动到特定单元格
			/// 函数内部计算了单元格的总高度，考虑了是否显示注释
			/// </summary>
			/// <param name="nRow"></param>
			/// <param name="nCol"></param>
			/// <returns></returns>
			int CMTerm1View::ScrollToCell(int nRow, int nCol)
			{
			int CellTotalHeight = m_CellHeight + (m_bShowComments ? m_CommentHeight : 0);
			@@ -227,36 +260,57 @@
			return 0;
			}

			/// <summary>
			/// 滚动单元格进入视图（未完成的功能）
			/// </summary>
			/// <param name="nRow"></param>
			/// <param name="nCol"></param>
			/// <returns></returns>
			int CMTerm1View::ScrollCellIntoView(int nRow, int nCol)
			{
			int CellTotalHeight = m_CellHeight + (m_bShowComments ? m_CommentHeight : 0);
			return 0;
			}

			/// <summary>
			/// 检查单元格是否在视图中（未完成的功能）
			/// </summary>
			/// <param name="nRow"></param>
			/// <param name="nCol"></param>
			/// <returns></returns>
			int CMTerm1View::isCellInView(int nRow, int nCol)
			{
			int CellTotalHeight = m_CellHeight + (m_bShowComments ? m_CommentHeight : 0);
			return 0;
			}

			/// <summary>
			/// 用于在视图中绘制图形的主要函数
			/// </summary>
			/// <param name="pDC">文档</param>
			/// <returns></returns>
			int CMTerm1View::DrawLDSGraph(CDC* pDC)
			{
			// TODO: 在此处添加实现代码.
			CString s1;
			CString s1;//没啥用

			//验证文档引用
			CMTerm1Doc* pDoc = GetDocument();
			ASSERT_VALID(pDoc);
			if (!pDoc) return false;

			if (m_bMonitoring) {
			pDoc->DoPLCMonitor();
			}

			int x1, y1, x2, y2;
			// RECT rect1;
			int CellTotalHeight = m_CellHeight + (m_bShowComments ? m_CommentHeight : 0);

			int nDataType, nDataAddr;
			int nStat;
			CBrush br0(BkColor);
			CBrush br01(BkEditColor);
			CBrush br0(BkColor);//背景颜色
			CBrush br01(BkEditColor);//编辑（选中）状态下的背景颜色
			int nRow, nCol;
			CRect rect0;
			this->GetClientRect(&rect0);
			@@ -264,19 +318,26 @@
			CPoint scroll1;
			scroll1 = this->GetScrollPosition();

			int nFirstVisibleLine;
			int nLastVisibleLine;

			int nFirstVisibleLine;//用于确定可见行范围-起始位置
			int nLastVisibleLine;//用于确定可见行范围-终止位置
			//通过滚动位置和视图的高度计算上述两个值
			nFirstVisibleLine = (scroll1.y - m_TopMargin) / CellTotalHeight;
			nLastVisibleLine = (rect0.Height() + scroll1.y - m_TopMargin) / CellTotalHeight + 1;
			if (nFirstVisibleLine < 0) { nFirstVisibleLine = 0; }
			if (nLastVisibleLine < 0) { nLastVisibleLine = 0; }
			if (nFirstVisibleLine < 0)
			{
			nFirstVisibleLine = 0;
			}
			if (nLastVisibleLine < 0)
			{
			nLastVisibleLine = 0;
			}

			//选择字体
			CFont *pOldFont;
			pOldFont = (CFont *)pDC->SelectObject(&TextFont);


			for (int i = nFirstVisibleLine; i < nLastVisibleLine && i < 1000; i++) {
			for (int i = nFirstVisibleLine; i < nLastVisibleLine && i < 1000; i++)
			{
			// 画一行单元
			nRow = i;
			int x0, y0;
			@@ -401,7 +462,6 @@
			return 0;
			}


			void CMTerm1View::DrawFocusRect(CDC* pDC)
			{
			// DrawCell(pDC, m_oldFocusRow, m_oldFocusCol);
			@@ -430,7 +490,6 @@
			// pDC->SelectObject(poldBrush);
			}


			int CMTerm1View::DrawLeftRightLine(CDC* pDC, int x0, int y0, int size1, int size2)
			{
			// TODO: 在此处添加实现代码.
			@@ -452,7 +511,6 @@
			pDC->LineTo(x2, y2);
			return 0;
			}


			void CMTerm1View::DrawOT(CDC* pDC, int x0, int y0)
			{
			@@ -535,6 +593,7 @@
			pDC->LineTo(x2, y2);
			return 0;
			}

			int CMTerm1View::DrawAngleBracket(CDC* pDC, int x0, int y0, int size1, int size2)
			{
			// TODO: 在此处添加实现代码.
			@@ -542,7 +601,7 @@
			DrawLeftRightLine(pDC, x0, y0, size1, size2);
			// 左尖括号
			x1 = x0 + size1 + 6;
			y1 = y0 + m_LinePosY -6;
			y1 = y0 + m_LinePosY -6;
			x2 = x1 -6;
			y2 = y1 +6 ;
			pDC->MoveTo(x1, y1);
			@@ -664,7 +723,7 @@
			int CellTotalHeight = m_CellHeight + (m_bShowComments ? m_CommentHeight : 0);

			rect1.left = m_LeftMargin + 1 + m_CellWidth * nCol;
			rect1.right = rect1.left + m_CellWidth;
			rect1.right = rect1.left + m_CellWidth;
			rect1.top = m_TopMargin + CellTotalHeight * nRow;
			rect1.bottom = rect1.top + CellTotalHeight;

			@@ -678,6 +737,9 @@
			if (needReDraw) {
			pDC->MoveTo(x0, y0);
			pDC->LineTo(x0, y0 + m_LinePosY);
			//画直竖线
			//pDC->MoveTo(x0, y0 + (0.32 * CellTotalHeight));
			//pDC->LineTo(x0, y0 - (0.69 * CellTotalHeight));
			}
			}
			if (Cells[nRow][nCol].bLeftLineDn && nCol != 0)
			@@ -702,9 +764,9 @@
			}
			else if (nType == typeLine2)
			{ //Draw Line
			//画直横线
			// pDC->MoveTo(x0, y0);
			// pDC->LineTo(x0, y0 + CellTotalHeight);
			//画直竖线
			pDC->MoveTo(x0, y0 + (0.32 * CellTotalHeight));
			pDC->LineTo(x0, y0 - (0.69 * CellTotalHeight));
			}
			else if (nType == typeNO)
			{
			@@ -1138,6 +1200,13 @@

			CScrollView::OnKeyDown(nChar, nRepCnt, nFlags);
			}

			/// <summary>
			/// 单元格焦点变化*选中点变化
			/// </summary>
			/// <param name="nRow"></param>
			/// <param name="nCol"></param>
			/// <returns></returns>
			int CMTerm1View::CellFocusChg(int nRow, int nCol)
			{
			CString s1;
			@@ -1149,13 +1218,11 @@

			auto p1 = (CMainFrame*)AfxGetMainWnd();
			auto p2 = p1->GetInputWnd();
			p2->SetCurCellPos(nRow,nCol,thecell);



			p2->SetCurCellPos(nRow,nCol,thecell);
			p2->focusCell = thecell;
			return 0;
			}

			//鼠标左键点击事件
			void CMTerm1View::OnLButtonDown(UINT nFlags, CPoint point)
			{
			// TODO: 在此添加消息处理程序代码和/或调用默认值
			@@ -1169,10 +1236,21 @@
			int CellTotalHeight = m_CellHeight + (m_bShowComments ? m_CommentHeight : 0);
			nRow = (ty - m_TopMargin) / CellTotalHeight;
			nCol = (tx - m_LeftMargin) / m_CellWidth;
			if (nRow < 0) { nRow = 0; }
			if (nCol < 0) { nCol = 0; }
			if (nCol >= m_CellPerLine) { nCol = m_CellPerLine - 1; }
			s1.Format(_T("LD %d %d %02X Scroll %d %d Total %d %d Row %d Col %d"), point.x, point.y, nFlags, scroll1.x, scroll1.y, tx, ty, nRow, nCol);
			if (nRow < 0)
			{
			nRow = 0;
			}
			if (nCol < 0)
			{
			nCol = 0;
			}
			if (nCol >= m_CellPerLine)
			{
			nCol = m_CellPerLine - 1;
			}
			s1.Format(_T("OnLButtonDown::zxd:: LD %d %d %02X Scroll %d %d Total %d %d Row %d Col %d"), point.x, point.y, nFlags, scroll1.x, scroll1.y, tx, ty, nRow, nCol);
			DbgLog(s1);//zxd add to test

			m_pStatusBar->SetPaneText(6, s1);
			m_FocusRow = nRow;
			m_FocusCol = nCol;
			@@ -1401,16 +1479,27 @@
			pCmdUI->SetCheck(m_bMonitoring == true);
			}

			/// <summary>
			/// 程序转换按钮点击
			/// </summary>
			void CMTerm1View::OnProgConvert()
			{
			// TODO: 在此添加命令处理程序代码
			//转换前先对LDS的规则进行检验（检验规则与返回参数并未完全确定
			std::pair<int,CString> result = LDSCheckRule();
			if (result.first == 111)
			{
			DbgLog(result.second);
			return;
			}

			CString s1;
			s1.Format(_T("Prog Convert"));
			SysLog(s1);
			int r = TransLDSToProg();
			s1.Format(_T("LDS To Prog result %d"), r);
			SysLog(s1);
			if (r==0) {
			if (r==0)
			{
			// m_bModified = 0;
			int j=TransProgToLDS();
			s1.Format(_T("Porg to LDS retuls %d"), j);
			@@ -1496,24 +1585,61 @@
			return -1;
			}

			void CMTerm1View::SetCellToView(stCell cell1) //**************************************************************************************************//
			/// <summary>
			/// 设置Cell到窗口视图
			/// </summary>
			/// <param name="cell1"></param>
			void CMTerm1View::SetCellToView(stCell cell1, int flag) //**************************************************************************************************//
			{

			Cells[m_FocusRow][m_FocusCol] = cell1;
			m_bModified = 1;
			needReDraw = 1;
			m_FocusCol += 1;

			Cells[m_FocusRow][0].bEditing = 1;

			if (m_nTotalRow < m_FocusRow + 1) {
			if (m_nTotalRow < m_FocusRow + 1)
			{
			m_nTotalRow = m_FocusRow + 1;
			}
			//单元格关联修改
			switch (flag)
			{
			case 1:
			{
			if(Cells[m_FocusRow - 1][m_FocusCol].nType == CMTerm1View::typeExt1)
			{
			//发送错误信息
			DbgLog(_T("插入纵线失败：光标位置错误！参数位置不允许添加纵线"));
			return;
			}
			//添加纵线时同步添加上一行
			Cells[m_FocusRow - 1][m_FocusCol].bLeftLineDn = 1;
			}break;
			case 2:
			{
			if (Cells[m_FocusRow - 1][m_FocusCol].nType == CMTerm1View::typeExt1)
			{
			//发送错误信息
			DbgLog(_T("删除纵线失败：光标位置错误！参数位置不允许删除纵线"));
			return;
			}
			//删除纵线时同步删除上一行
			Cells[m_FocusRow - 1][m_FocusCol].bLeftLineDn = 0;
			}break;
			default:
			break;
			}

			//单元格位置后移
			m_FocusCol += 1;
			if (m_FocusCol >= 16)
			{ m_FocusCol = 0;m_FocusRow += 1; }

			{
			m_FocusCol = 0;
			m_FocusRow += 1;
			}

			this->RedrawWindow();

			this->CellFocusChg(m_FocusRow, m_FocusCol);//改变焦点
			}
			void CMTerm1View::OnUpdateInsertBlankLine(CCmdUI *pCmdUI)
			{
			@@ -1800,7 +1926,10 @@
			}
			}


			/// <summary>
			/// 程序数据转为梯形图
			/// </summary>
			/// <returns></returns>
			int CMTerm1View::TransProgToLDS()
			{
			CString s1;
			@@ -1810,10 +1939,12 @@
			int stpos[100] = { 0 };
			int nSts = 0;

			for (int i = 0; i < m_nTotalRow && i < 2000; i++) {
			for (int j = 0; j < 16; j++) {
			for (int i = 0; i < m_nTotalRow && i < 2000; i++)
			{
			for (int j = 0; j < 16; j++)
			{
			Cells[i][j].clear();
			s1.Format(_T("%d:%d"), i, j);
			s1.Format(_T("%d:%d"), i, j);
			Cells[i][j].sCoilName = s1;
			}
			}
			@@ -1826,518 +1957,561 @@

			int cx = 0, cy = 0;
			int maxy = 0;
			for (int i = 0; i < pDoc->m_nProgSteps; i++)
			try
			{
			int nOp = pDoc->Progs[i].nOpType1;
			int nParamCount = pDoc->Progs[i].nParamCount;
			CStringA OpName;
			CStringA ShowTxt;
			pDoc->OpToTxt(nOp, OpName);
			pDoc->OpToShowTxt(nOp, ShowTxt);
			int nPairTo = pDoc->Progs[i].PairTo;
			int nPairOp = 0;
			if (nPairTo) nPairOp = pDoc->Progs[nPairTo].nOpType1;
			int nCellType;
			switch (nOp)
			for (int i = 0; i < pDoc->m_nProgSteps; i++)
			{

			case OP_NOP:
			break;
			case OP_ST:
			case OP_ST_:
			if (i == 0) {

			int nOp = pDoc->Progs[i].nOpType1;
			int nParamCount = pDoc->Progs[i].nParamCount;
			CStringA OpName;
			CStringA ShowTxt;
			pDoc->OpToTxt(nOp, OpName);
			pDoc->OpToShowTxt(nOp, ShowTxt);
			int nPairTo = pDoc->Progs[i].PairTo;
			int nPairOp = 0;
			if (nPairTo)
			{
			nPairOp = pDoc->Progs[nPairTo].nOpType1;
			}
			else {
			//记录当前位置
			EndPt[nEndPts] = POINT{ cx,cy };
			nEndPts++;
			if (nPairOp == OP_ANS) {
			//继续前进
			//cx = 0, cy = nCurLine;
			//cx = StPts[nSts - 1].x;
			//nCurLine = cy + 1; //另起一行
			int nCellType;
			switch (nOp)
			{
			case OP_NOP:
			break;
			case OP_ST:
			case OP_ST_:
			if (i == 0)
			{

			}
			else
			{
			//记录当前位置
			EndPt[nEndPts] = POINT{ cx,cy };
			nEndPts++;
			if (nPairOp == OP_ANS)
			{
			//继续前进
			//cx = 0, cy = nCurLine;
			//cx = StPts[nSts - 1].x;
			//nCurLine = cy + 1; //另起一行
			///*
			nCurLine=cy;
			int hasData = 1;
			while (hasData) {
			hasData = 0;
			for (int j = cx +1; j < m_CellPerLine; j++) {
			if (Cells[nCurLine][j].nType != 0) {
			nCurLine++; hasData = 1; break;
			nCurLine = cy;
			int hasData = 1;
			while (hasData) {
			hasData = 0;
			for (int j = cx + 1; j < m_CellPerLine; j++)
			{
			if (Cells[nCurLine][j].nType != 0)
			{
			nCurLine++; hasData = 1; break;
			}
			}
			}
			//nCurLine = maxy + 1; //另起一行
			if (nCurLine > maxy)
			{
			maxy = nCurLine;
			}
			for (int j = cy; j < nCurLine; j++)
			{
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			cy = nCurLine;
			//*/
			}
			// nCurLine = maxy + 1; //另起一行
			if (nCurLine > maxy) maxy = nCurLine;
			for (int j = cy; j < nCurLine; j++) {
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			cy = nCurLine;
			//*/
			}
			else if (nPairOp == OP_ORS) {
			cx = StPts[nSts - 1].x;
			nCurLine = cy + 1; //另起一行
			int hasData = 1;
			while (hasData) {
			hasData = 0;
			for (int j = cx; j < m_CellPerLine; j++) {
			if (Cells[nCurLine][j].nType != 0) {
			nCurLine++; hasData = 1; break;
			else if (nPairOp == OP_ORS)
			{
			cx = StPts[nSts - 1].x;
			nCurLine = cy + 1; //另起一行
			int hasData = 1;
			while (hasData)
			{
			hasData = 0;
			for (int j = cx; j < m_CellPerLine; j++)
			{
			if (Cells[nCurLine][j].nType != 0)
			{
			nCurLine++; hasData = 1; break;
			}
			}
			}
			// nCurLine = maxy + 1; //另起一行
			if (nCurLine > maxy) maxy = nCurLine;
			for (int j = cy; j < nCurLine; j++)
			{
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			cy = nCurLine;
			}
			// nCurLine = maxy + 1; //另起一行
			if (nCurLine > maxy) maxy = nCurLine;
			for (int j = cy; j < nCurLine; j++) {
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			else if (nPairOp == 0)
			{
			nCurLine = maxy + 1; //另起一行
			maxy = nCurLine;
			cx = 0; cy = nCurLine;
			}
			cy = nCurLine;
			}
			else if (nPairOp == 0) {
			nCurLine = maxy + 1; //另起一行
			maxy = nCurLine;
			cx = 0; cy = nCurLine;
			}
			}
			stpos[nSts] = i;
			StPts[nSts] = POINT{ cx,cy };
			nSts++;
			Cells[cy][cx].nType = pDoc->Progs[i].nOpType1 == OP_ST ? typeNO : typeNC; //typeNC
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			cx++; //移到下一格
			break;
			case OP_ST_EQ:
			case OP_ST_NE:
			case OP_ST_LT:
			case OP_ST_GT:
			case OP_ST_LE:
			case OP_ST_GE:
			if (i == 0) {
			stpos[nSts] = i;
			StPts[nSts] = POINT{ cx,cy };
			nSts++;
			Cells[cy][cx].nType = pDoc->Progs[i].nOpType1 == OP_ST ? typeNO : typeNC; //typeNC
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			cx++; //移到下一格
			break;
			case OP_ST_EQ:
			case OP_ST_NE:
			case OP_ST_LT:
			case OP_ST_GT:
			case OP_ST_LE:
			case OP_ST_GE:
			if (i == 0) {

			}
			else {
			//记录当前位置
			EndPt[nEndPts] = POINT{ cx,cy };
			nEndPts++;
			if (nPairOp == OP_ANS) {
			//继续前进
			//cx = 0, cy = nCurLine;
			}
			else if (nPairOp == OP_ORS) {
			cx = StPts[nSts - 1].x;
			nCurLine = cy + 1; //另起一行
			int hasData = 1;
			while (hasData) {
			hasData = 0;
			for (int j = cx; j < m_CellPerLine; j++) {
			if (Cells[nCurLine][j].nType != 0) {
			nCurLine++; hasData = 1; break;
			else {
			//记录当前位置
			EndPt[nEndPts] = POINT{ cx,cy };
			nEndPts++;
			if (nPairOp == OP_ANS) {
			//继续前进
			//cx = 0, cy = nCurLine;
			}
			else if (nPairOp == OP_ORS) {
			cx = StPts[nSts - 1].x;
			nCurLine = cy + 1; //另起一行
			int hasData = 1;
			while (hasData) {
			hasData = 0;
			for (int j = cx; j < m_CellPerLine; j++) {
			if (Cells[nCurLine][j].nType != 0) {
			nCurLine++; hasData = 1; break;
			}
			}
			}
			}
			// nCurLine = maxy + 1; //另起一行
			if (nCurLine > maxy) maxy = nCurLine;
			for (int j = cy; j < nCurLine; j++) {
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			cy = nCurLine;
			}
			else if (nPairOp == 0) {
			nCurLine = maxy + 1; //另起一行
			maxy = nCurLine;
			cx = 0; cy = nCurLine;
			}
			}
			stpos[nSts] = i;
			StPts[nSts] = POINT{ cx,cy };
			nSts++;
			Cells[cy][cx].nType = typeCMP;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sParam = OpName;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			Cells[cy][cx + 2].nType = typeExt1;
			Cells[cy][cx + 2].sParam = pDoc->Progs[i].Params[1].sParamStr;
			Cells[cy][cx + 2].nDataType = pDoc->Progs[i].Params[1].nParamType;
			Cells[cy][cx + 2].nDataAddr = pDoc->Progs[i].Params[1].nParamAddr;
			cx += 3; //移到下3格
			break;

			case OP_AN:
			case OP_AN_:

			Cells[cy][cx].nType = nOp == OP_AN ? typeNO : typeNC; //typeNC
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].sCoilName = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			cx++;
			break;
			case OP_AN_EQ:
			case OP_AN_NE:
			case OP_AN_LT:
			case OP_AN_GT:
			case OP_AN_LE:
			case OP_AN_GE:
			Cells[cy][cx].nType = typeCMP;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			Cells[cy][cx + 2].nType = typeExt1;
			Cells[cy][cx + 2].sParam = pDoc->Progs[i].Params[1].sParamStr;
			Cells[cy][cx + 2].nDataType = pDoc->Progs[i].Params[1].nParamType;
			Cells[cy][cx + 2].nDataAddr = pDoc->Progs[i].Params[1].nParamAddr;
			cx += 3;
			break;

			case OP_OR:
			case OP_OR_:
			EndPt[nEndPts] = POINT{ cx,cy };
			nEndPts++;
			cx = StPts[nSts - 1].x;
			nCurLine = cy + 1; //另起一行
			{
			int hasData = 1;
			while (hasData) {
			hasData = 0;
			for (int j = cx; j < m_CellPerLine; j++) {
			if (Cells[nCurLine][j].nType != 0) {
			nCurLine++; hasData = 1; break;
			// nCurLine = maxy + 1; //另起一行
			if (nCurLine > maxy) maxy = nCurLine;
			for (int j = cy; j < nCurLine; j++) {
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			cy = nCurLine;
			}
			else if (nPairOp == 0) {
			nCurLine = maxy + 1; //另起一行
			maxy = nCurLine;
			cx = 0; cy = nCurLine;
			}
			}
			}
			if (nCurLine > maxy) maxy = nCurLine;
			for (int j = cy; j < nCurLine; j++) {
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			cy = nCurLine;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].nType = nOp == OP_OR ? typeNO : typeNC; //typeNC
			Cells[cy][cx].sCoilName = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			cx++;
			if (cx < EndPt[nEndPts - 1].x)
			{ //本行补齐
			for (int j = cx; j < EndPt[nEndPts - 1].x; j++)
			{
			Cells[cy][j].nType = typeLine1;
			}
			cx = EndPt[nEndPts - 1].x;
			}
			else {
			//前一行补齐
			for (int j = EndPt[nEndPts - 1].x; j < cx; j++)
			{
			Cells[EndPt[nEndPts - 1].y][j].nType = typeLine1;
			}
			stpos[nSts] = i;
			StPts[nSts] = POINT{ cx,cy };
			nSts++;
			Cells[cy][cx].nType = typeCMP;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sParam = OpName;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			Cells[cy][cx + 2].nType = typeExt1;
			Cells[cy][cx + 2].sParam = pDoc->Progs[i].Params[1].sParamStr;
			Cells[cy][cx + 2].nDataType = pDoc->Progs[i].Params[1].nParamType;
			Cells[cy][cx + 2].nDataAddr = pDoc->Progs[i].Params[1].nParamAddr;
			cx += 3; //移到下3格
			break;

			}
			//连接上下线
			for (int j = EndPt[nEndPts - 1].y; j < cy; j++)
			{
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			//光标位置, 前一结束点位置
			cy = EndPt[nEndPts - 1].y;
			nEndPts--;
			case OP_AN:
			case OP_AN_:

			break;
			case OP_OR_EQ:
			case OP_OR_NE:
			case OP_OR_LT:
			case OP_OR_GT:
			case OP_OR_LE:
			case OP_OR_GE:
			EndPt[nEndPts] = POINT{ cx,cy };
			nEndPts++;
			cx = StPts[nSts - 1].x;
			nCurLine = cy + 1; //另起一行
			{
			int hasData = 1;
			while (hasData) {
			hasData = 0;
			for (int j = cx; j < m_CellPerLine; j++) {
			if (Cells[nCurLine][j].nType != 0) {
			nCurLine++; hasData = 1; break;
			}
			}
			}
			}
			if (nCurLine > maxy) maxy = nCurLine;
			for (int j = cy; j < nCurLine; j++) {
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			cy = nCurLine;
			Cells[cy][cx].nType = typeCMP;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			Cells[cy][cx + 2].nType = typeExt1;
			Cells[cy][cx + 2].sParam = pDoc->Progs[i].Params[1].sParamStr;
			Cells[cy][cx + 2].nDataType = pDoc->Progs[i].Params[1].nParamType;
			Cells[cy][cx + 2].nDataAddr = pDoc->Progs[i].Params[1].nParamAddr;
			cx += 3;
			if (cx < EndPt[nEndPts - 1].x)
			{ //本行补齐
			for (int j = cx; j < EndPt[nEndPts - 1].x; j++)
			{
			Cells[cy][j].nType = typeLine1;
			}
			cx = EndPt[nEndPts - 1].x;
			}
			else {
			//前一行补齐
			for (int j = EndPt[nEndPts - 1].x; j < cx; j++)
			{
			Cells[EndPt[nEndPts - 1].y][j].nType = typeLine1;
			}

			}
			//连接上下线
			for (int j = EndPt[nEndPts - 1].y; j < cy; j++)
			{
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			//光标位置, 前一结束点位置
			cy = EndPt[nEndPts - 1].y;
			nEndPts--;

			break;
			case OP_NOT:
			Cells[cy][cx].nType = typeNOT;
			Cells[cy][cx].sCoilName = _T("NOT");

			Cells[cy][cx].nProgStep = i;
			cx++;
			break;
			case OP_DF:
			case OP_DF_:
			Cells[cy][cx].nType = nOp == OP_DF ? typeDF : typeDF_;
			Cells[cy][cx].sCoilName = nOp == OP_DF ? _T("DF") : _T("DF/");

			Cells[cy][cx].nProgStep = i;
			cx++;
			break;
			case OP_ANS:
			nSts--;
			nEndPts--;

			break;
			case OP_ORS:
			// 当前序列与前面的序列合并。
			//当前序列的开始结束位置
			//EndPt[nEndPts] = POINT{ cx,cy };
			//nEndPts++;
			//StPts[nSts - 1]; EndPt[nEndPts - 1];
			//前一序列的开始结束位置
			StPts[nSts - 1]; EndPt[nEndPts - 1];
			//判断二者长度
			if (cx < EndPt[nEndPts - 1].x)
			{ //本行补齐
			for (int j = cx; j < EndPt[nEndPts - 1].x; j++)
			{
			Cells[cy][j].nType = typeLine1;
			}
			cx = EndPt[nEndPts - 1].x;
			}
			else {
			//前一行补齐
			for (int j = EndPt[nEndPts - 1].x; j < cx; j++)
			{
			Cells[EndPt[nEndPts - 1].y][j].nType = typeLine1;
			}

			}
			//连接上下线
			for (int j = EndPt[nEndPts - 1].y; j < cy; j++)
			{
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			//光标位置, 前一结束点位置
			cy = EndPt[nEndPts - 1].y;
			nSts--;
			nEndPts--;

			break;
			case OP_PSHS:
			EndPt[nEndPts] = POINT{ cx,cy };
			nEndPts++;
			break;
			case OP_RDS:
			cx = EndPt[nEndPts - 1].x;
			for (int j = cx; j < m_CellPerLine; j++) {
			if (Cells[cy][j].nType != 0)
			{
			cy++; j = cx - 1; //break;
			}
			}
			for (int j = EndPt[nEndPts - 1].y; j < cy; j++)
			{
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			break;
			case OP_POPS:
			cx = EndPt[nEndPts - 1].x;
			for (int j = cx; j < m_CellPerLine; j++) {
			if (Cells[cy][j].nType != 0)
			{
			cy++; j = cx - 1; break;
			}
			}
			for (int j = EndPt[nEndPts - 1].y; j < cy; j++)
			{
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			nEndPts--;

			break;
			case OP_OUT:
			case OP_SET:
			case OP_RESET:
			nCellType = nOp == OP_OUT ? typeOUT : nOp == OP_SET ? typeSET : typeRESET;
			nCurLine = cy;
			if (cx <= m_CellPerLine) {

			int hasData = 1;
			while (hasData) {
			hasData = 0;
			for (int j = cx; j < m_CellPerLine; j++) {
			if (Cells[nCurLine][j].nType != 0) {
			nCurLine++; hasData = 1; break;
			}
			}
			}
			//if (nCurLine > maxy) maxy = nCurLine;
			for (int j = cy; j < nCurLine; j++) {
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			cy = nCurLine;
			for (int j = cx; j < m_CellPerLine; j++)
			{
			Cells[cy][j].nType = typeLine1;
			}
			Cells[cy][m_CellPerLine - 1].nType = nCellType;
			Cells[cy][m_CellPerLine - 1].nProgStep = i;
			Cells[cy][m_CellPerLine - 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][m_CellPerLine - 1].sCoilName = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][m_CellPerLine - 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][m_CellPerLine - 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;

			}
			else {
			Cells[cy][cx].nType = nCellType;
			Cells[cy][cx].nType = nOp == OP_AN ? typeNO : typeNC; //typeNC
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].sCoilName = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			cx++;
			break;
			case OP_AN_EQ:
			case OP_AN_NE:
			case OP_AN_LT:
			case OP_AN_GT:
			case OP_AN_LE:
			case OP_AN_GE:
			Cells[cy][cx].nType = typeCMP;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			Cells[cy][cx + 2].nType = typeExt1;
			Cells[cy][cx + 2].sParam = pDoc->Progs[i].Params[1].sParamStr;
			Cells[cy][cx + 2].nDataType = pDoc->Progs[i].Params[1].nParamType;
			Cells[cy][cx + 2].nDataAddr = pDoc->Progs[i].Params[1].nParamAddr;
			cx += 3;
			break;

			case OP_OR:
			case OP_OR_:
			EndPt[nEndPts] = POINT{ cx,cy };
			nEndPts++;
			cx = StPts[nSts - 1].x;
			nCurLine = cy + 1; //另起一行
			{
			int hasData = 1;
			while (hasData)
			{
			hasData = 0;
			for (int j = cx; j < m_CellPerLine; j++)
			{
			if (Cells[nCurLine][j].nType != 0)
			{
			nCurLine++;
			hasData = 1;
			break;
			}
			}
			}
			}
			if (nCurLine > maxy)
			{
			maxy = nCurLine;
			}
			for (int j = cy; j < nCurLine; j++)
			{
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			cy = nCurLine;
			StPts[nSts] = POINT{ cx,cy };//+++
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].nType = nOp == OP_OR ? typeNO : typeNC; //typeNC
			Cells[cy][cx].sCoilName = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			cx++;
			//if (cx <= EndPt[nEndPts - 1].x)
			//{ //本行补齐
			// for (int j = cx; j < EndPt[nEndPts - 1].x; j++)
			// {
			// Cells[cy][j].nType = typeLine1;
			// }
			// cx = EndPt[nEndPts - 1].x;
			//}
			//else {
			// //前一行补齐
			// for (int j = EndPt[nEndPts - 1].x; j < cx; j++)
			// {
			// Cells[EndPt[nEndPts - 1].y][j].nType = typeLine1;
			// }

			//}
			//连接上下线
			for (int j = EndPt[nEndPts - 1].y; j < cy; j++)
			{
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			//光标位置, 前一结束点位置
			cy = EndPt[nEndPts - 1].y;

			nEndPts--;

			break;
			case OP_OR_EQ:
			case OP_OR_NE:
			case OP_OR_LT:
			case OP_OR_GT:
			case OP_OR_LE:
			case OP_OR_GE:
			EndPt[nEndPts] = POINT{ cx,cy };
			nEndPts++;
			cx = StPts[nSts - 1].x;
			nCurLine = cy + 1; //另起一行
			{
			int hasData = 1;
			while (hasData) {
			hasData = 0;
			for (int j = cx; j < m_CellPerLine; j++) {
			if (Cells[nCurLine][j].nType != 0) {
			nCurLine++; hasData = 1; break;
			}
			}
			}
			}
			if (nCurLine > maxy) maxy = nCurLine;
			for (int j = cy; j < nCurLine; j++) {
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			cy = nCurLine;
			Cells[cy][cx].nType = typeCMP;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			Cells[cy][cx + 2].nType = typeExt1;
			Cells[cy][cx + 2].sParam = pDoc->Progs[i].Params[1].sParamStr;
			Cells[cy][cx + 2].nDataType = pDoc->Progs[i].Params[1].nParamType;
			Cells[cy][cx + 2].nDataAddr = pDoc->Progs[i].Params[1].nParamAddr;
			cx += 3;
			if (cx < EndPt[nEndPts - 1].x)
			{ //本行补齐
			for (int j = cx; j < EndPt[nEndPts - 1].x; j++)
			{
			Cells[cy][j].nType = typeLine1;
			}
			cx = EndPt[nEndPts - 1].x;
			}
			else {
			//前一行补齐
			for (int j = EndPt[nEndPts - 1].x; j < cx; j++)
			{
			Cells[EndPt[nEndPts - 1].y][j].nType = typeLine1;
			}

			}
			//连接上下线
			for (int j = EndPt[nEndPts - 1].y; j < cy; j++)
			{
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			//光标位置, 前一结束点位置
			cy = EndPt[nEndPts - 1].y;
			nEndPts--;

			break;
			case OP_NOT:
			Cells[cy][cx].nType = typeNOT;
			Cells[cy][cx].sCoilName = _T("NOT");

			Cells[cy][cx].nProgStep = i;
			cx++;
			break;
			case OP_DF:
			case OP_DF_:
			Cells[cy][cx].nType = nOp == OP_DF ? typeDF : typeDF_;
			Cells[cy][cx].sCoilName = nOp == OP_DF ? _T("DF") : _T("DF/");

			Cells[cy][cx].nProgStep = i;
			cx++;
			break;
			case OP_ANS:
			nSts--;
			nEndPts--;

			break;
			case OP_ORS:
			//当前序列与前面的序列合并。
			//当前序列的开始结束位置
			//EndPt[nEndPts] = POINT{ cx,cy };
			//nEndPts++;
			//StPts[nSts - 1]; EndPt[nEndPts - 1];
			//前一序列的开始结束位置
			StPts[nSts - 1];
			EndPt[nEndPts - 1];
			if (nEndPts <= 0)
			{
			break;
			}

			////判断二者长度
			//if (cx < EndPt[nEndPts - 1].x)
			//{
			// //本行补齐
			// for (int j = cx; j < EndPt[nEndPts - 1].x; j++)
			// {
			// Cells[cy][j].nType = typeLine1;
			// }
			// cx = EndPt[nEndPts - 1].x;
			//}
			//else
			//{
			// //前一行补齐
			// for (int j = EndPt[nEndPts - 1].x; j < cx; j++)
			// {
			// Cells[EndPt[nEndPts - 1].y][j].nType = typeLine1;
			// }
			//}
			////连接上下线
			//for (int j = EndPt[nEndPts - 1].y; j < cy; j++)
			//{
			// Cells[j][cx].bLeftLineDn = 1;
			// Cells[j + 1][cx].bLeftLineUp = 1;
			//}
			////光标位置, 前一结束点位置
			//cy = EndPt[nEndPts - 1].y;
			nSts--;
			nEndPts--;

			break;
			case OP_PSHS:
			EndPt[nEndPts] = POINT{ cx,cy };
			nEndPts++;
			break;
			case OP_RDS:
			cx = EndPt[nEndPts - 1].x;
			for (int j = cx; j < m_CellPerLine; j++) {
			if (Cells[cy][j].nType != 0)
			{
			cy++; j = cx - 1; //break;
			}
			}
			for (int j = EndPt[nEndPts - 1].y; j < cy; j++)
			{
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			break;
			case OP_POPS:
			cx = EndPt[nEndPts - 1].x;
			for (int j = cx; j < m_CellPerLine; j++) {
			if (Cells[cy][j].nType != 0)
			{
			cy++; j = cx - 1; break;
			}
			}
			for (int j = EndPt[nEndPts - 1].y; j < cy; j++)
			{
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			nEndPts--;

			break;
			case OP_OUT:
			case OP_SET:
			case OP_RESET:
			nCellType = nOp == OP_OUT ? typeOUT : nOp == OP_SET ? typeSET : typeRESET;
			nCurLine = cy;
			if (cx <= m_CellPerLine) {

			int hasData = 1;
			while (hasData) {
			hasData = 0;
			for (int j = cx; j < m_CellPerLine; j++) {
			if (Cells[nCurLine][j].nType != 0) {
			nCurLine++; hasData = 1; break;
			}
			}
			}
			//if (nCurLine > maxy) maxy = nCurLine;
			for (int j = cy; j < nCurLine; j++) {
			Cells[j][cx].bLeftLineDn = 1;
			Cells[j + 1][cx].bLeftLineUp = 1;
			}
			cy = nCurLine;
			for (int j = cx; j < m_CellPerLine; j++)
			{
			Cells[cy][j].nType = typeLine1;
			}
			Cells[cy][m_CellPerLine - 1].nType = nCellType;
			Cells[cy][m_CellPerLine - 1].nProgStep = i;
			Cells[cy][m_CellPerLine - 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][m_CellPerLine - 1].sCoilName = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][m_CellPerLine - 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][m_CellPerLine - 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;

			}
			else {
			Cells[cy][cx].nType = nCellType;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].sCoilName = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			}
			if (cy > maxy) { maxy = cy; }
			//cy++;
			break;

			case OP_TML:
			case OP_TMR:
			case OP_TMX:
			case OP_TMY:
			Cells[cy][cx].nType = typeTM;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = KLDataTypeEV;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			Cells[cy][cx + 2].nType = typeExt1;
			Cells[cy][cx + 2].sParam = pDoc->Progs[i].Params[1].sParamStr;
			Cells[cy][cx + 2].nDataType = pDoc->Progs[i].Params[1].nParamType;
			Cells[cy][cx + 2].nDataAddr = pDoc->Progs[i].Params[1].nParamAddr;
			cx += 3;
			break;
			case OP_INC:
			case OP_DEC:
			Cells[cy][cx].nType = typeFN1;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			cx += 2;
			break;

			case OP_MV:
			case OP_ADD2:
			case OP_SUB2:
			Cells[cy][cx].nType = typeFN2;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			Cells[cy][cx + 2].nType = typeExt1;
			Cells[cy][cx + 2].sParam = pDoc->Progs[i].Params[1].sParamStr;
			Cells[cy][cx + 2].nDataType = pDoc->Progs[i].Params[1].nParamType;
			Cells[cy][cx + 2].nDataAddr = pDoc->Progs[i].Params[1].nParamAddr;
			cx += 3;
			break;

			case OP_ADD3:
			case OP_SUB3:
			case OP_MUL:
			case OP_DIV:
			Cells[cy][cx].nType = typeFN3;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			Cells[cy][cx + 2].nType = typeExt1;
			Cells[cy][cx + 2].sParam = pDoc->Progs[i].Params[1].sParamStr;
			Cells[cy][cx + 2].nDataType = pDoc->Progs[i].Params[1].nParamType;
			Cells[cy][cx + 2].nDataAddr = pDoc->Progs[i].Params[1].nParamAddr;
			Cells[cy][cx + 3].nType = typeExt1;
			Cells[cy][cx + 3].sParam = pDoc->Progs[i].Params[2].sParamStr;
			Cells[cy][cx + 3].nDataType = pDoc->Progs[i].Params[2].nParamType;
			Cells[cy][cx + 3].nDataAddr = pDoc->Progs[i].Params[2].nParamAddr;
			cx += 4;
			break;

			default:
			break;
			}
			if (cy > maxy) { maxy = cy; }
			//cy++;
			break;

			case OP_TML:
			case OP_TMR:
			case OP_TMX:
			case OP_TMY:
			Cells[cy][cx].nType = typeTM;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = KLDataTypeEV;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			Cells[cy][cx + 2].nType = typeExt1;
			Cells[cy][cx + 2].sParam = pDoc->Progs[i].Params[1].sParamStr;
			Cells[cy][cx + 2].nDataType = pDoc->Progs[i].Params[1].nParamType;
			Cells[cy][cx + 2].nDataAddr = pDoc->Progs[i].Params[1].nParamAddr;
			cx += 3;
			break;
			case OP_INC:
			case OP_DEC:
			Cells[cy][cx].nType = typeFN1;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			cx += 2;
			break;

			case OP_MV:
			case OP_ADD2:
			case OP_SUB2:
			Cells[cy][cx].nType = typeFN2;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			Cells[cy][cx + 2].nType = typeExt1;
			Cells[cy][cx + 2].sParam = pDoc->Progs[i].Params[1].sParamStr;
			Cells[cy][cx + 2].nDataType = pDoc->Progs[i].Params[1].nParamType;
			Cells[cy][cx + 2].nDataAddr = pDoc->Progs[i].Params[1].nParamAddr;
			cx += 3;
			break;

			case OP_ADD3:
			case OP_SUB3:
			case OP_MUL:
			case OP_DIV:
			Cells[cy][cx].nType = typeFN3;
			Cells[cy][cx].nProgStep = i;
			Cells[cy][cx].sCoilName = ShowTxt;
			Cells[cy][cx + 1].nType = typeExt1;
			Cells[cy][cx + 1].sParam = pDoc->Progs[i].Params[0].sParamStr;
			Cells[cy][cx + 1].nDataType = pDoc->Progs[i].Params[0].nParamType;
			Cells[cy][cx + 1].nDataAddr = pDoc->Progs[i].Params[0].nParamAddr;
			Cells[cy][cx + 2].nType = typeExt1;
			Cells[cy][cx + 2].sParam = pDoc->Progs[i].Params[1].sParamStr;
			Cells[cy][cx + 2].nDataType = pDoc->Progs[i].Params[1].nParamType;
			Cells[cy][cx + 2].nDataAddr = pDoc->Progs[i].Params[1].nParamAddr;
			Cells[cy][cx + 3].nType = typeExt1;
			Cells[cy][cx + 3].sParam = pDoc->Progs[i].Params[2].sParamStr;
			Cells[cy][cx + 3].nDataType = pDoc->Progs[i].Params[2].nParamType;
			Cells[cy][cx + 3].nDataAddr = pDoc->Progs[i].Params[2].nParamAddr;
			cx += 4;
			break;

			default:
			break;
			}
			}
			catch (const std::exception&)
			{
			DbgLog(_T("无法绘制图形（程序不合理）"));
			}

			m_nTotalRow = maxy + 1;
			/*
			for (int i = 0; i < 25; i++)
			@@ -2353,45 +2527,73 @@
			needReDraw = 1;
			return 0;
			}
			bool firstCoil = true;//本段第一个单元格


			/// <summary>
			/// 梯形图转Prog
			/// </summary>
			/// <returns></returns>
			int CMTerm1View::TransLDSToProg()
			{
			// TODO: 在此处添加实现代码.
			CMTerm1Doc * pDoc = GetDocument();
			CString s1;
			s1.Format(_T("Trans LDS to PRrog"));
			DbgLog(s1);
			s1.Format(_T("将梯形图转成prog格式"));
			DbgLog(s1);

			//梯形图数量
			//梯形图 ROW数量
			s1.Format(_T("总计行数 %d"), m_nTotalRow);
			DbgLog(s1);
			s1.Format(_T("Total Lines %d"), m_nTotalRow);
			DbgLog(s1);

			//分段
			int nDivCount = 0;
			//分段点集合
			int Divs[100] = { 0 };
			for (int i = 0; i < m_nTotalRow; i++) {
			for (int i = 0; i < m_nTotalRow; i++)
			{
			int nRow = i;
			int bConnected = 0;
			for (int j = 0; j < m_CellPerLine; j++) {
			for (int j = 0; j < m_CellPerLine; j++)
			{
			int nCol = j;
			if (Cells[nRow][nCol].bLeftLineDn) {
			bConnected = 1; break;
			if (Cells[nRow][nCol].bLeftLineDn)
			{
			bConnected = 1;
			s1.Format(_T("row==%d col==%d 有左下竖线！！！"), nRow,nCol);
			DbgLog(s1);
			break;
			}
			}
			if (!bConnected) {
			}
			if (!bConnected)
			{
			//找到一处分界点
			Divs[nDivCount] = i;
			s1.Format(_T("Div at Line %d "), nRow);
			s1.Format(_T("Div at Line %d 是：：：：：：：：：：：：分界点"), nRow);
			DbgLog(s1);
			nDivCount++;
			}
			}
			stProgSection allprogs;

			stProgSection allprogs;
			//每段单独处理
			for (int i = 0; i < nDivCount; i++) {
			for (int i = 0; i < nDivCount; i++)
			{
			int nStartLine, nEndLine;
			if (i == 0) { nStartLine = 0; nEndLine = Divs[i]; }
			else { nStartLine = Divs[i - 1]+1; nEndLine = Divs[i]; }
			if (i == 0)
			{
			nStartLine = 0;
			nEndLine = Divs[i];
			}
			else
			{
			nStartLine = Divs[i - 1]+1;
			nEndLine = Divs[i];
			}
			s1.Format(_T("本段行号起始-终止： %d - %d "), nStartLine, nEndLine);
			DbgLog(s1);
			s1.Format(_T("Process Line %d - %d "), nStartLine, nEndLine);
			DbgLog(s1);
			int nCounts[20] = { 0 };
			@@ -2399,35 +2601,50 @@
			int nCounts3[20] = { 0 };

			s1.Empty();
			for (int j = 0; j < m_CellPerLine; j++) {
			for (int j = 0; j < m_CellPerLine; j++)
			{
			int nCount = 0;
			int nCount2 = 0;
			int nCount3 = 0;
			for (int k = nStartLine; k <= nEndLine; k++) {
			if (Cells[k][j].nType) {
			for (int k = nStartLine; k <= nEndLine; k++)
			{
			if (Cells[k][j].nType)
			{
			nCount += 1;
			nCount2 += 1;
			nCount3 += 1;
			if (Cells[k][j].bLeftLineUp) nCount2 -= 1;
			if (Cells[k][j].bLeftLineUp)
			{
			nCount2 -= 1;
			}
			// if (Cells[k][j].bLeftLineDn) nCount2 -= 1;
			if (j != m_CellPerLine - 1) {
			if (Cells[k][j + 1].bLeftLineUp) nCount3 -= 1;

			if (j != m_CellPerLine - 1)
			{
			if (Cells[k][j + 1].bLeftLineUp)
			{
			nCount3 -= 1;
			}
			// if (Cells[k][j + 1].bLeftLineDn) nCount3 -= 1;
			}

			}
			}
			nCounts[j] = nCount;
			nCounts2[j] = nCount2;
			nCounts3[j] = nCount3;
			}

			s1.Empty();
			for (int j = 0; j < m_CellPerLine; j++) {
			for (int j = 0; j < m_CellPerLine; j++)
			{
			s1.AppendFormat(_T(" %d(%d)"), nCounts[j],nCounts3[j]);
			}
			DbgLog(_T(""));

			DbgLog(s1);
			s1.Empty();
			for (int j = 0; j < m_CellPerLine; j++) {
			for (int j = 0; j < m_CellPerLine; j++)
			{
			s1.AppendFormat(_T(" %d "), nCounts2[j]);
			}
			DbgLog(s1);
			@@ -2438,22 +2655,31 @@
			CString sProg;
			int nAllSteps=0;
			stProgSection Progsec;
			for (int i = nStartLine; i <= nEndLine; i++){
			for (int i = nStartLine; i <= nEndLine; i++)
			{
			CString sProgSec;
			int nSteps = 0;;
			nCurPosY = i;
			stProgSection thisprogsec;
			if (Cells[i][0].nType)
			ScanLDSCells(nStartLine, nEndLine, nCurPosY, nCurPosX, 0, thisprogsec, sProgSec,nSteps);
			{
			firstCoil = true;
			//循环遍历单元格(转换的逻辑在这个函数)
			ScanLDSCells(nStartLine, nEndLine, nCurPosY, nCurPosX, 0, thisprogsec, sProgSec, nSteps);
			}
			sProg += sProgSec;
			nAllSteps += nSteps;
			nAllSteps += nSteps;
			Progsec += thisprogsec;
			}

			DbgLog(_T("\r\n")+ sProg);
			int n = int(Progsec.Progs.size());
			s1.Format(_T("程序段步数： %d "), n);
			DbgLog(s1);
			s1.Format(_T("progSec steps %d "), n);
			DbgLog(s1);
			for (int i = 0; i < n; i++) {
			for (int i = 0; i < n; i++)
			{
			int optype = Progsec.Progs[i].nOpType1;
			CStringA OpTxtA, OpShowTxtA;
			CString OpTxt, OpShowTxt;
			@@ -2466,11 +2692,15 @@
			}
			allprogs += Progsec;
			}

			//输出程序
			int n=(int)allprogs.Progs.size();
			s1.Format(_T("总程序步数 %d "), n);
			DbgLog(s1);
			s1.Format(_T("all prog steps %d "), n);
			DbgLog(s1);
			for (int i = 0; i < n; i++) {
			for (int i = 0; i < n; i++)
			{
			int optype=allprogs.Progs[i].nOpType1;
			allprogs.Progs[i].PairTo = 0;
			allprogs.Progs[i].nBinStep = i;
			@@ -2488,17 +2718,31 @@
			return 0;
			}

			int CMTerm1View::ScanLDSCells(int nStartLine, int nEndLine, int nPosY, int nPosX, int nLevel, stProgSection & progsec, CString & sProgSec, int &nSteps)

			/// <summary>
			/// ：绘制每个单元格的内容
			/// </summary>
			/// <param name="nStartLine"></param>
			/// <param name="nEndLine"></param>
			/// <param name="nPosY">行</param>
			/// <param name="nPosX">列</param>
			/// <param name="nLevel">层级</param>
			/// <param name="progsec">prog格式的指令集</param>
			/// <param name="sProgSec">指令集</param>
			/// <param name="nSteps">程序步数</param>
			/// <returns></returns>
			int CMTerm1View::ScanLDSCells(int nStartLine, int nEndLine, int nPosY, int nPosX,
			int nLevel, stProgSection & progsec, CString & sProgSec, int &nSteps)
			{
			// TODO: 在此处添加实现代码.
			CString s1;
			int nCurPosX, nCurPosY;
			int nNextX = 1;
			int nNextX = 1;//步长
			nCurPosY = nPosY;
			nCurPosX = nPosX;
			int nCoilType, CoilAddr;
			CMTerm1Doc* pDoc = GetDocument();
			for (int j = nPosX; j < m_CellPerLine; j+=nNextX) {
			for (int j = nPosX; j < m_CellPerLine; j += nNextX)
			{
			nCurPosX = j;
			//先处理当前单元;
			int nType = Cells[nCurPosY][nCurPosX].nType;
			@@ -2506,19 +2750,235 @@
			CMTerm1Doc::stProg theprog;
			CStringA sCellNameA;
			sCellNameA = sCellName;
			if (nType == typeNO) {
			if (j==0) {
			s1.Format(_T("%d %d ST %s"), nCurPosY, nCurPosX,sCellName);
			sProgSec.AppendFormat(_T("ST %s\r\n"),sCellName);
			theprog.nOpType1 = OP_ST;

			if (j + nNextX >= m_CellPerLine)
			{
			continue;
			}

			//1.先获取此单元格右侧一格的竖线
			if (Cells[nCurPosY][j + nNextX].bLeftLineUp
			\|\| Cells[nCurPosY][j + nNextX].bLeftLineDn)
			{

			////先看往上面有没有连接
			//if (Cells[nCurPosY][j + nNextX].bLeftLineUp)
			//{
			// // 往上面有连接且有触点连接，才使用ORS
			// s1.Format(_T("%d %d ORS "), nCurPosY, nCurPosX);
			// DbgLog(s1);
			// theprog.nOpType1 = OP_ORS;
			// //theprog.nOpType1 = OP_ST;
			// //theprog.PairTo = OP_ORS;
			// progsec.Append(theprog);
			// sProgSec.AppendFormat(_T("ORS \r\n"));
			// firstCoil = false;
			// nSteps += 1;
			// nLevel -= 1;
			//}
			//左上是否有链接
			int nLeftUpCon = 0;
			if (Cells[nCurPosY][j + nNextX].bLeftLineUp)
			{
			nLeftUpCon = 1;
			}
			//向下查找，看看竖线的左侧下面还有没有连接其他东西
			int nLeftDnCon = 0;//单元格左侧向下连接数
			for (int k = nCurPosY + 1; k <= nEndLine; k++)
			{
			if (Cells[k][j + nNextX].bLeftLineDn)
			{
			if (Cells[k][j + nNextX - 1].nType)
			{
			nLeftDnCon += 1;
			}
			}
			else
			{
			break; // 竖线到最下面的端点了。
			}
			}

			s1.Format(_T("LeftUp %d LeftDn %d"), nLeftUpCon, nLeftDnCon);
			DbgLog(s1);

			//左侧下面有连接，那么扫描到这个竖线时返回，继续扫描左侧下面的内容。
			if (nLeftDnCon)
			{
			return 1;
			}
			// 左侧下面没有连接，那么这个就是左面最后的单元，开始处理右面的单元。
			else
			{
			if (nLeftUpCon)
			{
			if (nPosX > 0 \|\| nLevel > 0)
			{
			s1.Format(_T("%d %d ANS "), nCurPosY, nCurPosX);
			DbgLog(s1);
			theprog.nOpType1 = OP_ANS;
			progsec.Append(theprog);
			sProgSec.AppendFormat(_T("ANS \r\n"));
			nSteps += 1;
			nLevel -= 1;
			}
			}
			//从头到尾处理, 查找此竖线的最高位置;
			int nLineTop = nCurPosY;
			int nLineBottom = nCurPosY;
			for (int k = nCurPosY; k >= nStartLine; k--)
			{
			if (!Cells[k][j + nNextX].bLeftLineUp)
			{
			break;
			}
			nLineTop = k - 1;
			}

			// 查找右侧有几个连接
			int nRightCon = 0;//单元格右侧连接数
			for (int k = nLineTop; k <= nEndLine; k++)
			{
			if (Cells[k][j + nNextX].nType)
			{
			nRightCon += 1;
			}
			nLineBottom = k;
			if (!Cells[k][j + nNextX].bLeftLineDn)
			{
			break;
			}
			}
			s1.Format(_T("VLine %d - %d : %d , right = %d "), nLineTop, nLineBottom, j + nNextX, nRightCon);
			DbgLog(s1);

			if (nRightCon == 1)
			{
			s1.Format(_T(">>>> Go %d : %d , level %d "), nLineTop, j + nNextX, nLevel);
			DbgLog(s1);
			CString ProgSec;
			int theSteps = 0;
			stProgSection thisprogsec;

			//
			int r = ScanLDSCells(nStartLine, nEndLine, nLineTop, j + nNextX, nLevel, thisprogsec, ProgSec, theSteps);

			sProgSec += ProgSec;
			nSteps += theSteps;
			progsec += thisprogsec;
			s1.Format(_T("<<<< Re %d : %d , Result %d "), nLineTop, j + nNextX, 0);
			DbgLog(s1);
			}
			else
			{
			int nLastResult = 0;
			int nRightCount = 0;
			CString sCons[100];
			CString ProgSecs[100];
			int res[100] = { 0 };
			int nLastSteps = 0;
			for (int k = nLineTop; k <= nLineBottom; k++)
			{
			//s1.Format(_T("VLine %d - %d : %d %d of %d "), nLineTop, nLineBottom, j + nNextX, k+1,nRightCon);
			//DbgLog(s1);
			if (Cells[k][j + nNextX].nType)
			{
			s1.Format(_T(" >>> Go %d : %d , level %d "), k, j + nNextX, nLevel + 1);
			DbgLog(s1);
			CString ProgSec;
			int theSteps = 0;
			nLevel += 1;
			stProgSection thisprogsec;
			res[nRightCount] = ScanLDSCells(nStartLine, nEndLine, k, j + nNextX, nLevel, thisprogsec, ProgSecs[nRightCount], theSteps);
			nLastResult = res[nRightCount];
			nSteps += theSteps;
			progsec += thisprogsec;
			//if (res[nRightCount] > 0) nLevel += 1;
			sProgSec += ProgSec;
			s1.Format(_T(" <<< Re %d : %d , Result %d Steps %d Last %d"), k, j + nNextX, res[nRightCount], theSteps, nLastSteps);
			DbgLog(s1);
			if (nRightCount == 0)
			{

			}
			else if (res[nRightCount - 1] == 0)
			{
			s1.Format(_T(" POPS"), k, j + nNextX, nLevel + 1);
			DbgLog(s1);
			//sProgSec.AppendFormat(_T("POPS \r\n"));
			if (nLastSteps > 1)
			{
			if (sCons[nRightCount - 1] == _T("POPS"))
			{
			sCons[nRightCount - 1] = _T("RDS");
			}
			else
			{
			sCons[nRightCount - 1] = _T("PSHS");
			}
			sCons[nRightCount] = _T("POPS");
			}
			}
			else
			{

			}
			nLastSteps = theSteps;
			nRightCount++;
			}
			}
			nLastResult = 0;
			for (int k = 0; k < nRightCount; k++)
			{
			if (nLastResult \|\| res[k])
			{
			s1 = _T("ST") + ProgSecs[k];

			ProgSecs[k] = s1;
			}
			s1 = sCons[k] + _T("\r\n") + ProgSecs[k];
			sProgSec.Append(s1);
			nLastResult = res[k];
			}
			if (nLastResult)
			{
			sProgSec.Append(_T("ANS\r\n"));
			}
			return 0;
			}
			}
			}

			#pragma region 根据单元格类型转换为指令和prog

			if (nType == typeNO)
			{
			if (firstCoil && nType != typeLine1 && nType != typeLine2)
			{
			//先看往上面有没有连接
			if (Cells[nCurPosY][j + nNextX].bLeftLineUp)
			{
			// 往上面有连接且有触点连接，才使用OR
			s1.Format(_T("%d %d OR %s"), nCurPosY, nCurPosX, sCellName);
			sProgSec.AppendFormat(_T("OR %s\r\n"), sCellName);
			theprog.nOpType1 = OP_OR;
			}
			else
			{
			s1.Format(_T("%d %d ST %s"), nCurPosY, nCurPosX, sCellName);
			sProgSec.AppendFormat(_T("ST %s\r\n"), sCellName);
			theprog.nOpType1 = OP_ST;
			}
			theprog.nParamCount = 1;
			pDoc->TxtToCoilType(sCellNameA, &nCoilType, &CoilAddr);
			theprog.Params[0].nParamType = nCoilType;
			theprog.Params[0].nParamAddr = CoilAddr;
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);
			firstCoil = false;
			}
			else {
			else
			{
			s1.Format(_T("%d %d AN %s"), nCurPosY, nCurPosX, sCellName);
			sProgSec.AppendFormat(_T("NO %s\r\n"), sCellName);
			theprog.nOpType1 = OP_AN;
			@@ -2531,10 +2991,12 @@
			}
			nSteps += 1;
			DbgLog(s1);
			nNextX = 1;
			}else
			if (nType == typeNC) {
			if (j == 0) {
			nNextX = 1;
			}
			else if (nType == typeNC)
			{
			if (firstCoil && nType != typeLine1 && nType != typeLine2)
			{
			s1.Format(_T("%d %d ST/ %s"), nCurPosY, nCurPosX, sCellName);
			sProgSec.AppendFormat(_T("ST/ %s\r\n"), sCellName);
			theprog.nOpType1 = OP_ST_;
			@@ -2544,7 +3006,7 @@
			theprog.Params[0].nParamAddr = CoilAddr;
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);

			firstCoil = false;
			}
			else
			{
			@@ -2560,52 +3022,58 @@
			}
			DbgLog(s1);
			nSteps += 1;
			nNextX = 1;
			}else
			if (nType == typePP) {
			nNextX = 1;
			}
			else if (nType == typePP)
			{
			s1.Format(_T("%d %d PP %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			//progsec.Append(theprog);
			sProgSec.AppendFormat(_T("PP %s\r\n"), sCellName);
			nSteps += 1;
			nNextX = 1;
			}else
			if (nType == typePN) {
			nNextX = 1;
			}
			else if (nType == typePN)
			{
			s1.Format(_T("%d %d PN %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			//progsec.Append(theprog);
			sProgSec.AppendFormat(_T("PN %s\r\n"), sCellName, sCellName);
			nSteps += 1;
			nNextX = 1;
			}else
			if (nType == typeNOT) {
			nNextX = 1;
			}
			else if (nType == typeNOT)
			{
			s1.Format(_T("%d %d NOT %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			sProgSec.AppendFormat(_T("NOT %s\r\n"), sCellName);
			theprog.nOpType1 = OP_NOT;
			progsec.Append(theprog);
			nSteps += 1;
			nNextX = 1;
			}else
			if (nType == typeDF) {
			nNextX = 1;
			}
			else if (nType == typeDF)
			{
			s1.Format(_T("%d %d DF %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			sProgSec.AppendFormat(_T("DF %s\r\n"), sCellName);
			theprog.nOpType1 = OP_DF;
			progsec.Append(theprog);
			nSteps += 1;
			nNextX = 1;
			}else
			if (nType == typeDF_) {
			nNextX = 1;
			}
			else if (nType == typeDF_)
			{
			s1.Format(_T("%d %d DF/ %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			sProgSec.AppendFormat(_T("DF/ %s\r\n"), sCellName);
			theprog.nOpType1 = OP_DF_;
			progsec.Append(theprog);
			nSteps += 1;
			nNextX = 1;
			}else
			if (nType == typeOUT) {
			nNextX = 1;
			}
			else if (nType == typeOUT)
			{
			s1.Format(_T("%d %d OUT %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			sProgSec.AppendFormat(_T("OUT %s\r\n"), sCellName);
			@@ -2617,9 +3085,10 @@
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);
			nSteps += 1;
			nNextX = 1;
			}else
			if (nType == typeSET) {
			nNextX = 1;
			}
			else if (nType == typeSET)
			{
			s1.Format(_T("%d %d SET %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			sProgSec.AppendFormat(_T("SET %s\r\n"), sCellName);
			@@ -2631,9 +3100,10 @@
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);
			nSteps += 1;
			nNextX = 1;
			}else
			if (nType == typeRESET) {
			nNextX = 1;
			}
			else if (nType == typeRESET)
			{
			s1.Format(_T("%d %d RESET %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			sProgSec.AppendFormat(_T("RESET %s\r\n"), sCellName);
			@@ -2645,20 +3115,22 @@
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);
			nSteps += 1;
			nNextX = 1;
			}else
			if (nType == typeCMP) {
			s1.Format(_T("%d %d CMP %s %s %s"), nCurPosY, nCurPosX, sCellName,Cells[nCurPosY][nCurPosX+1].sParam,Cells[nCurPosY][nCurPosX + 2].sParam);
			nNextX = 1;
			}
			else if (nType == typeCMP)
			{
			s1.Format(_T("%d %d CMP %s %s %s"), nCurPosY, nCurPosX, sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam);
			DbgLog(s1);
			theprog.nOpType1 = OP_ST_GT;
			theprog.nParamCount = 1;
			progsec.Append(theprog);
			sProgSec.AppendFormat(_T("CMP %s %s %s \r\n"), sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam);
			nSteps += 1;
			nNextX = 3;
			}else
			if (nType == typeTM) {
			s1.Format(_T("%d %d TM %s %d %s"), nCurPosY, nCurPosX, sCellName,Cells[nCurPosY][nCurPosX+1].sParam,Cells[nCurPosY][nCurPosX + 2].sParam);
			nNextX = 3;
			}
			else if (nType == typeTM)
			{
			s1.Format(_T("%d %d TM %s %d %s"), nCurPosY, nCurPosX, sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam);
			DbgLog(s1);
			theprog.nOpType1 = OP_TMX;
			theprog.nParamCount = 1;
			@@ -2667,171 +3139,372 @@
			theprog.Params[0].nParamAddr = CoilAddr;
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);
			sProgSec.AppendFormat(_T("TM %s %d %s\r\n"), sCellName, Cells[nCurPosY][nCurPosX+1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam);
			sProgSec.AppendFormat(_T("TM %s %d %s\r\n"), sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam);
			nSteps += 1;
			nNextX = 3;
			}else
			if (nType == typeFN1) {
			s1.Format(_T("%d %d FN1 %s %s"), nCurPosY, nCurPosX, sCellName,Cells[nCurPosY][nCurPosX + 1].sParam);
			nNextX = 3;
			}
			else if (nType == typeFN1)
			{
			s1.Format(_T("%d %d FN1 %s %s"), nCurPosY, nCurPosX, sCellName, Cells[nCurPosY][nCurPosX + 1].sParam);
			DbgLog(s1);
			theprog.nOpType1 = OP_INC;
			progsec.Append(theprog);
			sProgSec.AppendFormat(_T("FN1 %s %s\r\n"), sCellName, Cells[nCurPosY][nCurPosX + 1].sParam);
			nSteps += 1;
			nNextX = 2;
			}else
			if (nType == typeFN2) {
			nNextX = 2;
			}
			else if (nType == typeFN2)
			{
			s1.Format(_T("%d %d FN2 %s %s %s "), nCurPosY, nCurPosX, sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam);
			DbgLog(s1);
			theprog.nOpType1 = OP_MV;
			progsec.Append(theprog);
			sProgSec.AppendFormat(_T("FN2 %s %s %s \r\n"), sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam);
			nSteps += 1;
			nNextX = 3;
			}else
			if (nType == typeFN3) {
			nNextX = 3;
			}
			else if (nType == typeFN3)
			{
			s1.Format(_T("%d %d FN3 %s %s %s %s"), nCurPosY, nCurPosX, sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam, Cells[nCurPosY][nCurPosX + 3].sParam);
			DbgLog(s1);
			theprog.nOpType1 = OP_ADD3;
			progsec.Append(theprog);
			sProgSec.AppendFormat(_T("FN3 %s %s %s %s\r\n"), sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam, Cells[nCurPosY][nCurPosX + 3].sParam);
			nSteps += 1;
			nNextX = 4;
			}else {
			nNextX = 1;
			nNextX = 4;
			}
			else
			{
			nNextX = 1;
			//continue;
			}

			#pragma endregion

			if (j + nNextX >= m_CellPerLine) continue;
			if (Cells[nCurPosY][j + nNextX].bLeftLineUp \|\| Cells[nCurPosY][j + nNextX].bLeftLineDn) { // 发现竖线
			//先看往上面有没有连接
			if (Cells[nCurPosY][j + nNextX].bLeftLineUp) { // 往上面有连接
			s1.Format(_T("%d %d ORS "), nCurPosY, nCurPosX);
			DbgLog(s1);
			theprog.nOpType1 = OP_ORS;
			progsec.Append(theprog);
			sProgSec.AppendFormat(_T("ORS \r\n"));
			nSteps += 1;
			nLevel -= 1;
			}
			int nLeftUpCon = 0;
			if (Cells[nCurPosY][j + nNextX].bLeftLineUp ) nLeftUpCon = 1;
			//向下查找，看看竖线的左侧下面还有没有连接其他东西/
			int nLeftDnCon = 0;
			for (int k = nCurPosY + 1; k <= nEndLine; k++) {
			if (!Cells[k][j + nNextX].bLeftLineUp) break; // 竖线到最下面的端点了。
			if (Cells[k][j + nNextX - 1 ].nType) { nLeftDnCon += 1; break; }
			}
			s1.Format(_T("LeftUp %d LeftDn %d"), nLeftUpCon, nLeftDnCon);
			DbgLog(s1);
			if (nLeftDnCon) { //左侧有连接，那么扫描到这个竖线，继续扫描左侧下面的内容。

			return 1;
			}
			if (!nLeftDnCon) {// 左侧下面没有连接，那么这个就是左面最后的单元，开始处理右面的单元。
			if (nLeftUpCon) {
			if ( nPosX >0 \|\| nLevel > 0) {
			s1.Format(_T("%d %d ANS "), nCurPosY, nCurPosX);
			DbgLog(s1);
			theprog.nOpType1 = OP_ANS;
			progsec.Append(theprog);
			sProgSec.AppendFormat(_T("ANS \r\n"));
			nSteps += 1;
			nLevel -= 1;
			}

			}
			//从头到尾处理, 查找此竖线的最高位置;
			int nLineTop = nCurPosY;
			int nLineBottom = nCurPosY;
			for (int k = nCurPosY; k >= nStartLine; k--)
			{
			if (!Cells[k][j + nNextX].bLeftLineUp) { break; }
			nLineTop = k -1;
			}
			// 查找右侧有几个连接
			int nRightCon = 0;
			for (int k = nLineTop; k <= nEndLine; k++) {
			if (Cells[k][j + nNextX].nType) { nRightCon += 1; }
			nLineBottom = k;
			if (!Cells[k][j + nNextX].bLeftLineDn) { break; }
			}
			s1.Format(_T("VLine %d - %d : %d , right = %d "), nLineTop,nLineBottom,j+nNextX,nRightCon);
			DbgLog(s1);
			if (nRightCon == 1) {
			s1.Format(_T(">>>> Go %d : %d , level %d "), nLineTop, j + nNextX, nLevel);
			DbgLog(s1);
			CString ProgSec;
			int theSteps = 0;
			stProgSection thisprogsec;
			int r = ScanLDSCells(nStartLine, nEndLine, nLineTop, j + nNextX, nLevel,thisprogsec, ProgSec,theSteps);
			sProgSec += ProgSec;
			nSteps += theSteps;
			progsec += thisprogsec;
			s1.Format(_T("<<<< Re %d : %d , Result %d "), nLineTop, j + nNextX, r);
			DbgLog(s1);
			}
			else
			{
			int nLastResult = 0;
			int nRightCount = 0;
			CString sCons[100];
			CString ProgSecs[100];
			int res[100] = { 0 };
			int nLastSteps = 0;
			for (int k = nLineTop; k <= nLineBottom; k++)
			{
			//s1.Format(_T("VLine %d - %d : %d %d of %d "), nLineTop, nLineBottom, j + nNextX, k+1,nRightCon);
			//DbgLog(s1);
			if (Cells[k][j + nNextX].nType) {
			s1.Format(_T(" >>> Go %d : %d , level %d "), k, j + nNextX, nLevel +1);
			DbgLog(s1);
			CString ProgSec;
			int theSteps = 0;
			nLevel += 1;
			stProgSection thisprogsec;
			res[nRightCount] = ScanLDSCells(nStartLine, nEndLine, k, j + nNextX, nLevel ,thisprogsec,ProgSecs[nRightCount],theSteps);
			nLastResult = res[nRightCount];
			nSteps += theSteps;
			progsec += thisprogsec;
			//if (res[nRightCount] > 0) nLevel += 1;
			sProgSec += ProgSec;
			s1.Format(_T(" <<< Re %d : %d , Result %d Steps %d Last %d"), k, j + nNextX, res[nRightCount],theSteps,nLastSteps);
			DbgLog(s1);
			if (nRightCount == 0) {
			}
			else if (res[nRightCount-1] == 0) {
			s1.Format(_T(" POPS"), k, j + nNextX, nLevel + 1);
			DbgLog(s1);
			//sProgSec.AppendFormat(_T("POPS \r\n"));
			if (nLastSteps > 1)
			{
			if (sCons[nRightCount - 1] == _T("POPS")) { sCons[nRightCount - 1] = _T("RDS"); }
			else { sCons[nRightCount - 1] = _T("PSHS"); }
			sCons[nRightCount] = _T("POPS");
			}
			}
			else {

			}
			nLastSteps = theSteps;
			nRightCount++;
			}
			}
			nLastResult = 0;
			for (int k = 0; k < nRightCount; k++)
			{
			if (nLastResult \|\| res[k]) { s1 = _T("ST") + ProgSecs[k]; ProgSecs[k] =s1; }
			s1= sCons[k] + _T("\r\n") + ProgSecs[k];
			sProgSec.Append(s1);
			nLastResult = res[k];
			}
			if (nLastResult) sProgSec.Append(_T("ANS\r\n"));
			return 0;
			}
			}
			}
			}
			return 0;
			}
			}
			/*
			void CMTerm1View::chuansileitetoprog(int nStartLine, int nEndLine, int nPosY, int nPosX, int nLevel, stProgSection& progsec, CString& sProgSec, int& nSteps)
			{
			CString s1;
			int nCurPosX, nCurPosY;
			int nNextX = 1;//步长
			nCurPosY = nPosY;
			nCurPosX = nPosX;
			int nCoilType, CoilAddr;
			CMTerm1Doc* pDoc = GetDocument();
			#pragma region 根据单元格类型转换为指令和prog

			if (nType == typeNO)
			{
			if (firstCoil && nType != typeLine1 && nType != typeLine2)
			{
			//先看往上面有没有连接
			if (Cells[nCurPosY][j + nNextX].bLeftLineUp)
			{
			// 往上面有连接且有触点连接，才使用OR
			s1.Format(_T("%d %d OR %s"), nCurPosY, nCurPosX, sCellName);
			sProgSec.AppendFormat(_T("OR %s\r\n"), sCellName);
			.nOpType1 = OP_OR;
			}
			else
			{
			s1.Format(_T("%d %d ST %s"), nCurPosY, nCurPosX, sCellName);
			sProgSec.AppendFormat(_T("ST %s\r\n"), sCellName);
			theprog.nOpType1 = OP_ST;
			}
			theprog.nParamCount = 1;
			pDoc->TxtToCoilType(sCellNameA, &nCoilType, &CoilAddr);
			theprog.Params[0].nParamType = nCoilType;
			theprog.Params[0].nParamAddr = CoilAddr;
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);
			firstCoil = false;
			}
			else
			{
			s1.Format(_T("%d %d AN %s"), nCurPosY, nCurPosX, sCellName);
			sProgSec.AppendFormat(_T("NO %s\r\n"), sCellName);
			theprog.nOpType1 = OP_AN;
			theprog.nParamCount = 1;
			pDoc->TxtToCoilType(sCellNameA, &nCoilType, &CoilAddr);
			theprog.Params[0].nParamType = nCoilType;
			theprog.Params[0].nParamAddr = CoilAddr;
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);
			}
			nSteps += 1;
			DbgLog(s1);
			nNextX = 1;
			}
			else if (nType == typeNC)
			{
			if (firstCoil && nType != typeLine1 && nType != typeLine2)
			{
			s1.Format(_T("%d %d ST/ %s"), nCurPosY, nCurPosX, sCellName);
			sProgSec.AppendFormat(_T("ST/ %s\r\n"), sCellName);
			theprog.nOpType1 = OP_ST_;
			theprog.nParamCount = 1;
			pDoc->TxtToCoilType(sCellNameA, &nCoilType, &CoilAddr);
			theprog.Params[0].nParamType = nCoilType;
			theprog.Params[0].nParamAddr = CoilAddr;
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);
			firstCoil = false;
			}
			else
			{
			s1.Format(_T("%d %d AN/ %s"), nCurPosY, nCurPosX, sCellName);
			sProgSec.AppendFormat(_T("AN/ %s\r\n"), sCellName);
			theprog.nOpType1 = OP_AN_;
			theprog.nParamCount = 1;
			pDoc->TxtToCoilType(sCellNameA, &nCoilType, &CoilAddr);
			theprog.Params[0].nParamType = nCoilType;
			theprog.Params[0].nParamAddr = CoilAddr;
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);
			}
			DbgLog(s1);
			nSteps += 1;
			nNextX = 1;
			}
			else if (nType == typePP)
			{
			s1.Format(_T("%d %d PP %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			//progsec.Append(theprog);
			sProgSec.AppendFormat(_T("PP %s\r\n"), sCellName);
			nSteps += 1;
			nNextX = 1;
			}
			else if (nType == typePN)
			{
			s1.Format(_T("%d %d PN %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			//progsec.Append(theprog);
			sProgSec.AppendFormat(_T("PN %s\r\n"), sCellName, sCellName);
			nSteps += 1;
			nNextX = 1;
			}
			else if (nType == typeNOT)
			{
			s1.Format(_T("%d %d NOT %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			sProgSec.AppendFormat(_T("NOT %s\r\n"), sCellName);
			theprog.nOpType1 = OP_NOT;
			progsec.Append(theprog);
			nSteps += 1;
			nNextX = 1;
			}
			else if (nType == typeDF)
			{
			s1.Format(_T("%d %d DF %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			sProgSec.AppendFormat(_T("DF %s\r\n"), sCellName);
			theprog.nOpType1 = OP_DF;
			progsec.Append(theprog);
			nSteps += 1;
			nNextX = 1;
			}
			else if (nType == typeDF_)
			{
			s1.Format(_T("%d %d DF/ %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			sProgSec.AppendFormat(_T("DF/ %s\r\n"), sCellName);
			theprog.nOpType1 = OP_DF_;
			progsec.Append(theprog);
			nSteps += 1;
			nNextX = 1;
			}
			else if (nType == typeOUT)
			{
			s1.Format(_T("%d %d OUT %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			sProgSec.AppendFormat(_T("OUT %s\r\n"), sCellName);
			theprog.nOpType1 = OP_OUT;
			theprog.nParamCount = 1;
			pDoc->TxtToCoilType(sCellNameA, &nCoilType, &CoilAddr);
			theprog.Params[0].nParamType = nCoilType;
			theprog.Params[0].nParamAddr = CoilAddr;
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);
			nSteps += 1;
			nNextX = 1;
			}
			else if (nType == typeSET)
			{
			s1.Format(_T("%d %d SET %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			sProgSec.AppendFormat(_T("SET %s\r\n"), sCellName);
			theprog.nOpType1 = OP_SET;
			theprog.nParamCount = 1;
			pDoc->TxtToCoilType(sCellNameA, &nCoilType, &CoilAddr);
			theprog.Params[0].nParamType = nCoilType;
			theprog.Params[0].nParamAddr = CoilAddr;
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);
			nSteps += 1;
			nNextX = 1;
			}
			else if (nType == typeRESET)
			{
			s1.Format(_T("%d %d RESET %s"), nCurPosY, nCurPosX, sCellName);
			DbgLog(s1);
			sProgSec.AppendFormat(_T("RESET %s\r\n"), sCellName);
			theprog.nOpType1 = OP_RESET;
			theprog.nParamCount = 1;
			pDoc->TxtToCoilType(sCellNameA, &nCoilType, &CoilAddr);
			theprog.Params[0].nParamType = nCoilType;
			theprog.Params[0].nParamAddr = CoilAddr;
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);
			nSteps += 1;
			nNextX = 1;
			}
			else if (nType == typeCMP)
			{
			s1.Format(_T("%d %d CMP %s %s %s"), nCurPosY, nCurPosX, sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam);
			DbgLog(s1);
			theprog.nOpType1 = OP_ST_GT;
			theprog.nParamCount = 1;
			progsec.Append(theprog);
			sProgSec.AppendFormat(_T("CMP %s %s %s \r\n"), sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam);
			nSteps += 1;
			nNextX = 3;
			}
			else if (nType == typeTM)
			{
			s1.Format(_T("%d %d TM %s %d %s"), nCurPosY, nCurPosX, sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam);
			DbgLog(s1);
			theprog.nOpType1 = OP_TMX;
			theprog.nParamCount = 1;
			pDoc->TxtToCoilType(sCellNameA, &nCoilType, &CoilAddr);
			theprog.Params[0].nParamType = nCoilType;
			theprog.Params[0].nParamAddr = CoilAddr;
			theprog.Params[0].sParamStr = sCellNameA;
			progsec.Append(theprog);
			sProgSec.AppendFormat(_T("TM %s %d %s\r\n"), sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam);
			nSteps += 1;
			nNextX = 3;
			}
			else if (nType == typeFN1)
			{
			s1.Format(_T("%d %d FN1 %s %s"), nCurPosY, nCurPosX, sCellName, Cells[nCurPosY][nCurPosX + 1].sParam);
			DbgLog(s1);
			theprog.nOpType1 = OP_INC;
			progsec.Append(theprog);
			sProgSec.AppendFormat(_T("FN1 %s %s\r\n"), sCellName, Cells[nCurPosY][nCurPosX + 1].sParam);
			nSteps += 1;
			nNextX = 2;
			}
			else if (nType == typeFN2)
			{
			s1.Format(_T("%d %d FN2 %s %s %s "), nCurPosY, nCurPosX, sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam);
			DbgLog(s1);
			theprog.nOpType1 = OP_MV;
			progsec.Append(theprog);
			sProgSec.AppendFormat(_T("FN2 %s %s %s \r\n"), sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam);
			nSteps += 1;
			nNextX = 3;
			}
			else if (nType == typeFN3)
			{
			s1.Format(_T("%d %d FN3 %s %s %s %s"), nCurPosY, nCurPosX, sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam, Cells[nCurPosY][nCurPosX + 3].sParam);
			DbgLog(s1);
			theprog.nOpType1 = OP_ADD3;
			progsec.Append(theprog);
			sProgSec.AppendFormat(_T("FN3 %s %s %s %s\r\n"), sCellName, Cells[nCurPosY][nCurPosX + 1].sParam, Cells[nCurPosY][nCurPosX + 2].sParam, Cells[nCurPosY][nCurPosX + 3].sParam);
			nSteps += 1;
			nNextX = 4;
			}
			else
			{
			nNextX = 1;
			//continue;
			}

			#pragma endregion
			}
			*/

			/// <summary>
			/// 全部图形校验
			/// </summary>
			/// <returns></returns>
			/// <remark>
			/// 计划在第一个返回值中使用不同的错误代码代表不同的错误类型，
			/// 并在第二个返回值中填充错误提示信息
			/// </remark>
			std::pair<int, CString> CMTerm1View::LDSCheckRule()
			{
			CString message;
			int nDivCount = 0;
			int Divs[100] = { 0 };
			//以行为单位从上到下遍历（行遍历）
			for (int i = 0; i < m_nTotalRow; i++)
			{
			int nRow = i;
			int bConnected = 0;
			bool checkFlag = false;//0列检验结果

			//本行的0列检查
			if (Cells[nRow][0].nType == 0)
			{
			checkFlag = true;
			}

			//遍历此行的1-15列（确定单元格）
			for (int j = 1; j < m_CellPerLine; j++)
			{
			int nCol = j;
			//如果0列为空
			if (checkFlag)
			{
			//有左侧上竖线
			if (Cells[nRow][nCol].bLeftLineUp)
			{
			//如果上层为空单元格，无效竖线，直接删除-----可以单独判断
			if (nRow - 1 >= 0 && Cells[nRow-1][nCol].nType == 0)
			{
			//清理单元格
			Cells[nRow][nCol].clear();
			}
			//如果是none，错误：短路或回路
			else if (Cells[nRow][nCol].nType == 0)
			{
			message.Format(_T("((%d,%d) 附近位置产生触点短路或回路！"),nRow,nCol);
			return std::make_pair(111, message);
			}
			//如果不为none。可以转换，但是提示：无法绘制图形（程序不合理）
			if (Cells[nRow][nCol].nType != 1)
			{
			message.Format(_T("((%d,%d) 无法绘制图形（程序不合理）"), nRow, nCol);
			return std::make_pair(111, message);
			}

			}
			//没有左侧上竖线，且此单元格类型不为空或线
			else if (Cells[nRow][nCol].nType > 2)
			{
			//此单元格为单独的线圈或指令单元，需要触点输入
			message.Format(_T("((%d,%d) 需要触点输入"), nRow, nCol);
			return std::make_pair(111, message);
			}
			//有左侧下竖线，且此单元格类型为空
			if (Cells[nRow][nCol].bLeftLineDn)
			{
			//不支持回路
			}
			}
			//如0列非空
			else
			{

			}
			}


			}
			return std::make_pair(0,message);
			}