F030C8xx_KBus.git

QuakeGod

2021-06-20 bfc108e6097eff2bec73050e261f3b9e5db447b7

提交 \| 用户 \| age
bfc108	1	/**
Q	2	******************************************************************************
	3	* @file stm32f0xx_hal_smartcard.h
	4	* @author MCD Application Team
	5	* @brief Header file of SMARTCARD HAL module.
	6	******************************************************************************
	7	* @attention
	8	*
	9	* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
	10	*
	11	* Redistribution and use in source and binary forms, with or without modification,
	12	* are permitted provided that the following conditions are met:
	13	* 1. Redistributions of source code must retain the above copyright notice,
	14	* this list of conditions and the following disclaimer.
	15	* 2. Redistributions in binary form must reproduce the above copyright notice,
	16	* this list of conditions and the following disclaimer in the documentation
	17	* and/or other materials provided with the distribution.
	18	* 3. Neither the name of STMicroelectronics nor the names of its contributors
	19	* may be used to endorse or promote products derived from this software
	20	* without specific prior written permission.
	21	*
	22	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	23	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	24	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	25	* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
	26	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	27	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
	28	* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
	29	* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
	30	* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	31	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	32	*
	33	******************************************************************************
	34	*/
	35
	36	/* Define to prevent recursive inclusion -------------------------------------*/
	37	#ifndef __STM32F0xx_HAL_SMARTCARD_H
	38	#define __STM32F0xx_HAL_SMARTCARD_H
	39
	40	#ifdef __cplusplus
	41	extern "C" {
	42	#endif
	43
	44	#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
	45
	46	/* Includes ------------------------------------------------------------------*/
	47	#include "stm32f0xx_hal_def.h"
	48
	49	/** @addtogroup STM32F0xx_HAL_Driver
	50	* @{
	51	*/
	52
	53	/** @addtogroup SMARTCARD
	54	* @{
	55	*/
	56
	57	/* Exported types ------------------------------------------------------------*/
	58	/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
	59	* @{
	60	*/
	61
	62	/**
	63	* @brief SMARTCARD Init Structure definition
	64	*/
	65	typedef struct
	66	{
	67	uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate.
	68	The baud rate register is computed using the following formula:
	69	Baud Rate Register = ((PCLKx) / ((hsmartcard->Init.BaudRate))) */
	70
	71	uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
	72	This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
	73
	74	uint32_t StopBits; /*!< Specifies the number of stop bits.
	75	This parameter can be a value of @ref SMARTCARD_Stop_Bits. */
	76
	77	uint16_t Parity; /*!< Specifies the parity mode.
	78	This parameter can be a value of @ref SMARTCARD_Parity
	79	@note The parity is enabled by default (PCE is forced to 1).
	80	Since the WordLength is forced to 8 bits + parity, M is
	81	forced to 1 and the parity bit is the 9th bit. */
	82
	83	uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
	84	This parameter can be a value of @ref SMARTCARD_Mode */
	85
	86	uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
	87	This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
	88
	89	uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
	90	This parameter can be a value of @ref SMARTCARD_Clock_Phase */
	91
	92	uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
	93	data bit (MSB) has to be output on the SCLK pin in synchronous mode.
	94	This parameter can be a value of @ref SMARTCARD_Last_Bit */
	95
	96	uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
	97	Selecting the single sample method increases the receiver tolerance to clock
	98	deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
	99
	100	uint8_t Prescaler; /!< Specifies the SmartCard Prescaler. /
	101
	102	uint8_t GuardTime; /!< Specifies the SmartCard Guard Time applied after stop bits. /
	103
	104	uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
	105	in case of parity error.
	106	This parameter can be a value of @ref SMARTCARD_NACK_Enable */
	107
	108	uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
	109	This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
	110
	111	uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks:
	112	it is used to implement the Character Wait Time (CWT) and
	113	Block Wait Time (BWT). It is coded over 24 bits. */
	114
	115	uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode.
	116	This parameter can be any value from 0x0 to 0xFF */
	117
	118	uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in
	119	receive and transmit mode). When set to 0, retransmission is
	120	disabled. Otherwise, its maximum value is 7 (before signalling
	121	an error) */
	122
	123	}SMARTCARD_InitTypeDef;
	124
	125	/**
	126	* @brief SMARTCARD advanced features initalization structure definition
	127	*/
	128	typedef struct
	129	{
	130	uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several
	131	advanced features may be initialized at the same time. This parameter
	132	can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */
	133
	134	uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
	135	This parameter can be a value of @ref SMARTCARD_Tx_Inv */
	136
	137	uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
	138	This parameter can be a value of @ref SMARTCARD_Rx_Inv */
	139
	140	uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
	141	vs negative/inverted logic).
	142	This parameter can be a value of @ref SMARTCARD_Data_Inv */
	143
	144	uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
	145	This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */
	146
	147	uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
	148	This parameter can be a value of @ref SMARTCARD_Overrun_Disable */
	149
	150	uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
	151	This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */
	152
	153	uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
	154	This parameter can be a value of @ref SMARTCARD_MSB_First */
	155	}SMARTCARD_AdvFeatureInitTypeDef;
	156
	157	/**
	158	* @brief HAL SMARTCARD State structures definition
	159	* @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState.
	160	* - gState contains SMARTCARD state information related to global Handle management
	161	* and also information related to Tx operations.
	162	* gState value coding follow below described bitmap :
	163	* b7-b6 Error information
	164	* 00 : No Error
	165	* 01 : (Not Used)
	166	* 10 : Timeout
	167	* 11 : Error
	168	* b5 IP initilisation status
	169	* 0 : Reset (IP not initialized)
	170	* 1 : Init done (IP not initialized. HAL SMARTCARD Init function already called)
	171	* b4-b3 (not used)
	172	* xx : Should be set to 00
	173	* b2 Intrinsic process state
	174	* 0 : Ready
	175	* 1 : Busy (IP busy with some configuration or internal operations)
	176	* b1 (not used)
	177	* x : Should be set to 0
	178	* b0 Tx state
	179	* 0 : Ready (no Tx operation ongoing)
	180	* 1 : Busy (Tx operation ongoing)
	181	* - RxState contains information related to Rx operations.
	182	* RxState value coding follow below described bitmap :
	183	* b7-b6 (not used)
	184	* xx : Should be set to 00
	185	* b5 IP initilisation status
	186	* 0 : Reset (IP not initialized)
	187	* 1 : Init done (IP not initialized)
	188	* b4-b2 (not used)
	189	* xxx : Should be set to 000
	190	* b1 Rx state
	191	* 0 : Ready (no Rx operation ongoing)
	192	* 1 : Busy (Rx operation ongoing)
	193	* b0 (not used)
	194	* x : Should be set to 0.
	195	*/
	196	typedef enum
	197	{
	198	HAL_SMARTCARD_STATE_RESET = 0x00U, /*!< Peripheral is not initialized
	199	Value is allowed for gState and RxState */
	200	HAL_SMARTCARD_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
	201	Value is allowed for gState and RxState */
	202	HAL_SMARTCARD_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
	203	Value is allowed for gState only */
	204	HAL_SMARTCARD_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
	205	Value is allowed for gState only */
	206	HAL_SMARTCARD_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
	207	Value is allowed for RxState only */
	208	HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
	209	Not to be used for neither gState nor RxState.
	210	Value is result of combination (Or) between gState and RxState values */
	211	HAL_SMARTCARD_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
	212	Value is allowed for gState only */
	213	HAL_SMARTCARD_STATE_ERROR = 0xE0U /*!< Error
	214	Value is allowed for gState only */
	215	}HAL_SMARTCARD_StateTypeDef;
	216
	217	/**
	218	* @brief SMARTCARD clock sources
	219	*/
	220	typedef enum
	221	{
	222	SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00U, /!< PCLK1 clock source /
	223	SMARTCARD_CLOCKSOURCE_HSI = 0x02U, /!< HSI clock source /
	224	SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04U, /!< SYSCLK clock source /
	225	SMARTCARD_CLOCKSOURCE_LSE = 0x08U, /!< LSE clock source /
	226	SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10U /!< undefined clock source /
	227	}SMARTCARD_ClockSourceTypeDef;
	228
	229	/**
	230	* @brief SMARTCARD handle Structure definition
	231	*/
	232	typedef struct
	233	{
	234	USART_TypeDef Instance; /!< USART registers base address */
	235
	236	SMARTCARD_InitTypeDef Init; /!< SmartCard communication parameters /
	237
	238	SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /!< SmartCard advanced features initialization parameters /
	239
	240	uint8_t pTxBuffPtr; /!< Pointer to SmartCard Tx transfer Buffer */
	241
	242	uint16_t TxXferSize; /!< SmartCard Tx Transfer size /
	243
	244	__IO uint16_t TxXferCount; /!< SmartCard Tx Transfer Counter /
	245
	246	uint8_t pRxBuffPtr; /!< Pointer to SmartCard Rx transfer Buffer */
	247
	248	uint16_t RxXferSize; /!< SmartCard Rx Transfer size /
	249
	250	__IO uint16_t RxXferCount; /!< SmartCard Rx Transfer Counter /
	251
	252	DMA_HandleTypeDef hdmatx; /!< SmartCard Tx DMA Handle parameters */
	253
	254	DMA_HandleTypeDef hdmarx; /!< SmartCard Rx DMA Handle parameters */
	255
	256	HAL_LockTypeDef Lock; /!< Locking object /
	257
	258	__IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management
	259	and also related to Tx operations.
	260	This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
	261
	262	__IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations.
	263	This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
	264
	265	__IO uint32_t ErrorCode; /*!< SmartCard Error code
	266	This parameter can be a value of @ref SMARTCARD_Error */
	267
	268	}SMARTCARD_HandleTypeDef;
	269
	270	/**
	271	* @}
	272	*/
	273
	274	/* Exported constants --------------------------------------------------------*/
	275	/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported Constants
	276	* @{
	277	*/
	278
	279	/** @defgroup SMARTCARD_Error SMARTCARD Error
	280	* @{
	281	*/
	282	#define HAL_SMARTCARD_ERROR_NONE (0x00000000U) /!< No error /
	283	#define HAL_SMARTCARD_ERROR_PE (0x00000001U) /!< Parity error /
	284	#define HAL_SMARTCARD_ERROR_NE (0x00000002U) /!< Noise error /
	285	#define HAL_SMARTCARD_ERROR_FE (0x00000004U) /!< frame error /
	286	#define HAL_SMARTCARD_ERROR_ORE (0x00000008U) /!< Overrun error /
	287	#define HAL_SMARTCARD_ERROR_DMA (0x00000010U) /!< DMA transfer error /
	288	#define HAL_SMARTCARD_ERROR_RTO (0x00000020U) /!< Receiver TimeOut error /
	289	/**
	290	* @}
	291	*/
	292
	293	/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
	294	* @{
	295	*/
	296	#if defined (USART_CR1_M0)
	297	#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) /!< SMARTCARD frame length /
	298	#else
	299	#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M) /!< SMARTCARD frame length /
	300	#endif
	301	/**
	302	* @}
	303	*/
	304
	305	/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits
	306	* @{
	307	*/
	308	#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) /!< SMARTCARD frame with 0.5 stop bit /
	309	#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 \| USART_CR2_STOP_1)) /!< SMARTCARD frame with 1.5 stop bits /
	310	/**
	311	* @}
	312	*/
	313
	314	/** @defgroup SMARTCARD_Parity SMARTCARD Parity
	315	* @{
	316	*/
	317	#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE) /!< SMARTCARD frame even parity /
	318	#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE \| USART_CR1_PS)) /!< SMARTCARD frame odd parity /
	319	/**
	320	* @}
	321	*/
	322
	323	/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode
	324	* @{
	325	*/
	326	#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE) /!< SMARTCARD RX mode /
	327	#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE) /!< SMARTCARD TX mode /
	328	#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE \|USART_CR1_RE)) /!< SMARTCARD RX and TX mode /
	329	/**
	330	* @}
	331	*/
	332
	333	/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
	334	* @{
	335	*/
	336	#define SMARTCARD_POLARITY_LOW (0x00000000U) /!< SMARTCARD frame low polarity /
	337	#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) /!< SMARTCARD frame high polarity /
	338	/**
	339	* @}
	340	*/
	341
	342	/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
	343	* @{
	344	*/
	345	#define SMARTCARD_PHASE_1EDGE (0x00000000U) /!< SMARTCARD frame phase on first clock transition /
	346	#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) /!< SMARTCARD frame phase on second clock transition /
	347	/**
	348	* @}
	349	*/
	350
	351	/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
	352	* @{
	353	*/
	354	#define SMARTCARD_LASTBIT_DISABLE (0x00000000U) /!< SMARTCARD frame last data bit clock pulse not output to SCLK pin /
	355	#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) /!< SMARTCARD frame last data bit clock pulse output to SCLK pin /
	356	/**
	357	* @}
	358	*/
	359
	360	/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method
	361	* @{
	362	*/
	363	#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE (0x00000000U) /!< SMARTCARD frame one-bit sample disabled /
	364	#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) /!< SMARTCARD frame one-bit sample enabled /
	365	/**
	366	* @}
	367	*/
	368
	369
	370	/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
	371	* @{
	372	*/
	373	#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK) /!< SMARTCARD NACK transmission disabled /
	374	#define SMARTCARD_NACK_DISABLE (0x00000000U) /!< SMARTCARD NACK transmission enabled /
	375	/**
	376	* @}
	377	*/
	378
	379	/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable
	380	* @{
	381	*/
	382	#define SMARTCARD_TIMEOUT_DISABLE (0x00000000U) /!< SMARTCARD receiver timeout disabled /
	383	#define SMARTCARD_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN) /!< SMARTCARD receiver timeout enabled /
	384	/**
	385	* @}
	386	*/
	387
	388	/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type
	389	* @{
	390	*/
	391	#define SMARTCARD_ADVFEATURE_NO_INIT (0x00000000U) /!< No advanced feature initialization /
	392	#define SMARTCARD_ADVFEATURE_TXINVERT_INIT (0x00000001U) /!< TX pin active level inversion /
	393	#define SMARTCARD_ADVFEATURE_RXINVERT_INIT (0x00000002U) /!< RX pin active level inversion /
	394	#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT (0x00000004U) /!< Binary data inversion /
	395	#define SMARTCARD_ADVFEATURE_SWAP_INIT (0x00000008U) /!< TX/RX pins swap /
	396	#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT (0x00000010U) /!< RX overrun disable /
	397	#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT (0x00000020U) /!< DMA disable on Reception Error /
	398	#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT (0x00000080U) /!< Most significant bit sent/received first /
	399	/**
	400	* @}
	401	*/
	402
	403	/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion
	404	* @{
	405	*/
	406	#define SMARTCARD_ADVFEATURE_TXINV_DISABLE (0x00000000U) /!< TX pin active level inversion disable /
	407	#define SMARTCARD_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV) /!< TX pin active level inversion enable /
	408	/**
	409	* @}
	410	*/
	411
	412	/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion
	413	* @{
	414	*/
	415	#define SMARTCARD_ADVFEATURE_RXINV_DISABLE (0x00000000U) /!< RX pin active level inversion disable /
	416	#define SMARTCARD_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV) /!< RX pin active level inversion enable /
	417	/**
	418	* @}
	419	*/
	420
	421	/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion
	422	* @{
	423	*/
	424	#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE (0x00000000U) /!< Binary data inversion disable /
	425	#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV) /!< Binary data inversion enable /
	426	/**
	427	* @}
	428	*/
	429
	430	/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap
	431	* @{
	432	*/
	433	#define SMARTCARD_ADVFEATURE_SWAP_DISABLE (0x00000000U) /!< TX/RX pins swap disable /
	434	#define SMARTCARD_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP) /!< TX/RX pins swap enable /
	435	/**
	436	* @}
	437	*/
	438
	439	/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable
	440	* @{
	441	*/
	442	#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE (0x00000000U) /!< RX overrun enable /
	443	#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS) /!< RX overrun disable /
	444	/**
	445	* @}
	446	*/
	447
	448	/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error
	449	* @{
	450	*/
	451	#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR (0x00000000U) /!< DMA enable on Reception Error /
	452	#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE) /!< DMA disable on Reception Error /
	453	/**
	454	* @}
	455	*/
	456
	457	/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first
	458	* @{
	459	*/
	460	#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE (0x00000000U) /!< Most significant bit sent/received first disable /
	461	#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST) /!< Most significant bit sent/received first enable /
	462	/**
	463	* @}
	464	*/
	465
	466	/** @defgroup SMARTCARD_Flags SMARTCARD Flags
	467	* Elements values convention: 0xXXXX
	468	* - 0xXXXX : Flag mask in the ISR register
	469	* @{
	470	*/
	471	#define SMARTCARD_FLAG_REACK USART_ISR_REACK /!< SMARTCARD receive enable acknowledge flag /
	472	#define SMARTCARD_FLAG_TEACK USART_ISR_TEACK /!< SMARTCARD transmit enable acknowledge flag /
	473	#define SMARTCARD_FLAG_BUSY USART_ISR_BUSY /!< SMARTCARD busy flag /
	474	#define SMARTCARD_FLAG_EOBF USART_ISR_EOBF /!< SMARTCARD end of block flag /
	475	#define SMARTCARD_FLAG_RTOF USART_ISR_RTOF /!< SMARTCARD receiver timeout flag /
	476	#define SMARTCARD_FLAG_TXE USART_ISR_TXE /!< SMARTCARD transmit data register empty /
	477	#define SMARTCARD_FLAG_TC USART_ISR_TC /!< SMARTCARD transmission complete /
	478	#define SMARTCARD_FLAG_RXNE USART_ISR_RXNE /!< SMARTCARD read data register not empty /
	479	#define SMARTCARD_FLAG_IDLE USART_ISR_IDLE /!< SMARTCARD idle line detection /
	480	#define SMARTCARD_FLAG_ORE USART_ISR_ORE /!< SMARTCARD overrun error /
	481	#define SMARTCARD_FLAG_NE USART_ISR_NE /!< SMARTCARD noise error /
	482	#define SMARTCARD_FLAG_FE USART_ISR_FE /!< SMARTCARD frame error /
	483	#define SMARTCARD_FLAG_PE USART_ISR_PE /!< SMARTCARD parity error /
	484	/**
	485	* @}
	486	*/
	487
	488	/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition
	489	* Elements values convention: 0000ZZZZ0XXYYYYYb
	490	* - YYYYY : Interrupt source position in the XX register (5bits)
	491	* - XX : Interrupt source register (2bits)
	492	* - 01: CR1 register
	493	* - 10: CR2 register
	494	* - 11: CR3 register
	495	* - ZZZZ : Flag position in the ISR register(4bits)
	496	* @{
	497	*/
	498
	499	#define SMARTCARD_IT_PE ((uint16_t)0x0028U) /!< SMARTCARD parity error interruption /
	500	#define SMARTCARD_IT_TXE ((uint16_t)0x0727U) /!< SMARTCARD transmit data register empty interruption /
	501	#define SMARTCARD_IT_TC ((uint16_t)0x0626U) /!< SMARTCARD transmission complete interruption /
	502	#define SMARTCARD_IT_RXNE ((uint16_t)0x0525U) /!< SMARTCARD read data register not empty interruption /
	503	#define SMARTCARD_IT_IDLE ((uint16_t)0x0424U) /!< SMARTCARD idle line detection interruption /
	504
	505	#define SMARTCARD_IT_ERR ((uint16_t)0x0060U) /!< SMARTCARD error interruption /
	506	#define SMARTCARD_IT_ORE ((uint16_t)0x0300U) /!< SMARTCARD overrun error interruption /
	507	#define SMARTCARD_IT_NE ((uint16_t)0x0200U) /!< SMARTCARD noise error interruption /
	508	#define SMARTCARD_IT_FE ((uint16_t)0x0100U) /!< SMARTCARD frame error interruption /
	509
	510	#define SMARTCARD_IT_EOB ((uint16_t)0x0C3BU) /!< SMARTCARD end of block interruption /
	511	#define SMARTCARD_IT_RTO ((uint16_t)0x0B3AU) /!< SMARTCARD receiver timeout interruption /
	512	/**
	513	* @}
	514	*/
	515
	516	/** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags
	517	* @{
	518	*/
	519	#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /!< SMARTCARD parity error clear flag /
	520	#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /!< SMARTCARD framing error clear flag /
	521	#define SMARTCARD_CLEAR_NEF USART_ICR_NCF /!< SMARTCARD noise detected clear flag /
	522	#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /!< SMARTCARD overrun error clear flag /
	523	#define SMARTCARD_CLEAR_IDLEF USART_ICR_IDLECF /!< SMARTCARD idle line detected clear flag /
	524	#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /!< SMARTCARD transmission complete clear flag /
	525	#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /!< SMARTCARD receiver time out clear flag /
	526	#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /!< SMARTCARD end of block clear flag /
	527	/**
	528	* @}
	529	*/
	530
	531	/** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS SMARTCARD auto retry counter LSB position in CR3 register
	532	* @{
	533	*/
	534	#define SMARTCARD_CR3_SCARCNT_LSB_POS ( 17U) /!< SMARTCARD auto retry counter LSB position in CR3 register /
	535	/**
	536	* @}
	537	*/
	538
	539	/** @defgroup SMARTCARD_GTPR_GT_LSB_POS SMARTCARD guard time value LSB position in GTPR register
	540	* @{
	541	*/
	542	#define SMARTCARD_GTPR_GT_LSB_POS ( 8U) /!< SMARTCARD guard time value LSB position in GTPR register /
	543	/**
	544	* @}
	545	*/
	546
	547	/** @defgroup SMARTCARD_RTOR_BLEN_LSB_POS SMARTCARD block length LSB position in RTOR register
	548	* @{
	549	*/
	550	#define SMARTCARD_RTOR_BLEN_LSB_POS ( 24U) /!< SMARTCARD block length LSB position in RTOR register /
	551	/**
	552	* @}
	553	*/
	554
	555	/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flags mask
	556	* @{
	557	*/
	558	#define SMARTCARD_IT_MASK ((uint16_t)0x001FU) /!< SMARTCARD interruptions flags mask /
	559	/**
	560	* @}
	561	*/
	562
	563	/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters
	564	* @{
	565	*/
	566	#define SMARTCARD_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /!< Receive data flush request /
	567	#define SMARTCARD_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /!< Transmit data flush request /
	568	/**
	569	* @}
	570	*/
	571
	572	/**
	573	* @}
	574	*/
	575
	576	/* Exported macros -----------------------------------------------------------*/
	577	/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
	578	* @{
	579	*/
	580
	581	/** @brief Reset SMARTCARD handle states.
	582	* @param __HANDLE__ SMARTCARD handle.
	583	* @retval None
	584	*/
	585	#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \
	586	(__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \
	587	(__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \
	588	} while(0U)
	589
	590	/** @brief Flush the Smartcard Data registers.
	591	* @param __HANDLE__ specifies the SMARTCARD Handle.
	592	* @retval None
	593	*/
	594	#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) \
	595	do{ \
	596	SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST); \
	597	SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_TXDATA_FLUSH_REQUEST); \
	598	} while(0U)
	599
	600	/** @brief Clear the specified SMARTCARD pending flag.
	601	* @param __HANDLE__ specifies the SMARTCARD Handle.
	602	* @param __FLAG__ specifies the flag to check.
	603	* This parameter can be any combination of the following values:
	604	* @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag
	605	* @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag
	606	* @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag
	607	* @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag
	608	* @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detected clear flag
	609	* @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag
	610	* @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag
	611	* @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag
	612	* @retval None
	613	*/
	614	#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
	615
	616	/** @brief Clear the SMARTCARD PE pending flag.
	617	* @param __HANDLE__ specifies the SMARTCARD Handle.
	618	* @retval None
	619	*/
	620	#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_PEF)
	621
	622
	623	/** @brief Clear the SMARTCARD FE pending flag.
	624	* @param __HANDLE__ specifies the SMARTCARD Handle.
	625	* @retval None
	626	*/
	627	#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_FEF)
	628
	629	/** @brief Clear the SMARTCARD NE pending flag.
	630	* @param __HANDLE__ specifies the SMARTCARD Handle.
	631	* @retval None
	632	*/
	633	#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_NEF)
	634
	635	/** @brief Clear the SMARTCARD ORE pending flag.
	636	* @param __HANDLE__ specifies the SMARTCARD Handle.
	637	* @retval None
	638	*/
	639	#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_OREF)
	640
	641	/** @brief Clear the SMARTCARD IDLE pending flag.
	642	* @param __HANDLE__ specifies the SMARTCARD Handle.
	643	* @retval None
	644	*/
	645	#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_IDLEF)
	646
	647	/** @brief Check whether the specified Smartcard flag is set or not.
	648	* @param __HANDLE__ specifies the SMARTCARD Handle.
	649	* @param __FLAG__ specifies the flag to check.
	650	* This parameter can be one of the following values:
	651	* @arg @ref SMARTCARD_FLAG_REACK Receive enable acknowledge flag
	652	* @arg @ref SMARTCARD_FLAG_TEACK Transmit enable acknowledge flag
	653	* @arg @ref SMARTCARD_FLAG_BUSY Busy flag
	654	* @arg @ref SMARTCARD_FLAG_EOBF End of block flag
	655	* @arg @ref SMARTCARD_FLAG_RTOF Receiver timeout flag
	656	* @arg @ref SMARTCARD_FLAG_TXE Transmit data register empty flag
	657	* @arg @ref SMARTCARD_FLAG_TC Transmission complete flag
	658	* @arg @ref SMARTCARD_FLAG_RXNE Receive data register not empty flag
	659	* @arg @ref SMARTCARD_FLAG_IDLE Idle line detection flag
	660	* @arg @ref SMARTCARD_FLAG_ORE Overrun error flag
	661	* @arg @ref SMARTCARD_FLAG_NE Noise error flag
	662	* @arg @ref SMARTCARD_FLAG_FE Framing error flag
	663	* @arg @ref SMARTCARD_FLAG_PE Parity error flag
	664	* @retval The new state of __FLAG__ (TRUE or FALSE).
	665	*/
	666	#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
	667
	668
	669	/** @brief Enable the specified SmartCard interrupt.
	670	* @param __HANDLE__ specifies the SMARTCARD Handle.
	671	* @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable.
	672	* This parameter can be one of the following values:
	673	* @arg @ref SMARTCARD_IT_EOB End of block interrupt
	674	* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
	675	* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
	676	* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
	677	* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
	678	* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
	679	* @arg @ref SMARTCARD_IT_PE Parity error interrupt
	680	* @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
	681	* @retval None
	682	*/
	683	#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & 0xFFU) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 \|= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
	684	((((__INTERRUPT__) & 0xFFU) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 \|= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
	685	((__HANDLE__)->Instance->CR3 \|= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
	686
	687	/** @brief Disable the specified SmartCard interrupt.
	688	* @param __HANDLE__ specifies the SMARTCARD Handle.
	689	* @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable.
	690	* This parameter can be one of the following values:
	691	* @arg @ref SMARTCARD_IT_EOB End of block interrupt
	692	* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
	693	* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
	694	* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
	695	* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
	696	* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
	697	* @arg @ref SMARTCARD_IT_PE Parity error interrupt
	698	* @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
	699	* @retval None
	700	*/
	701	#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & 0xFFU) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
	702	((((__INTERRUPT__) & 0xFFU) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
	703	((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
	704
	705
	706	/** @brief Check whether the specified SmartCard interrupt has occurred or not.
	707	* @param __HANDLE__ specifies the SMARTCARD Handle.
	708	* @param __IT__ specifies the SMARTCARD interrupt to check.
	709	* This parameter can be one of the following values:
	710	* @arg @ref SMARTCARD_IT_EOB End of block interrupt
	711	* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
	712	* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
	713	* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
	714	* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
	715	* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
	716	* @arg @ref SMARTCARD_IT_ORE Overrun error interrupt
	717	* @arg @ref SMARTCARD_IT_NE Noise error interrupt
	718	* @arg @ref SMARTCARD_IT_FE Framing error interrupt
	719	* @arg @ref SMARTCARD_IT_PE Parity error interrupt
	720	* @retval The new state of __IT__ (TRUE or FALSE).
	721	*/
	722	#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & (1U << ((__IT__)>> 0x08U)))
	723
	724	/** @brief Check whether the specified SmartCard interrupt source is enabled or not.
	725	* @param __HANDLE__ specifies the SMARTCARD Handle.
	726	* @param __IT__ specifies the SMARTCARD interrupt source to check.
	727	* This parameter can be one of the following values:
	728	* @arg @ref SMARTCARD_IT_EOB End of block interrupt
	729	* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
	730	* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
	731	* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
	732	* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
	733	* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
	734	* @arg @ref SMARTCARD_IT_ERR Framing, overrun or noise error interrupt
	735	* @arg @ref SMARTCARD_IT_PE Parity error interrupt
	736	* @retval The new state of __IT__ (TRUE or FALSE).
	737	*/
	738	#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((__IT__) & 0xFFU) >> 5U) == 1U)? (__HANDLE__)->Instance->CR1 : \
	739	(((((__IT__) & 0xFFU) >> 5U) == 2U)? (__HANDLE__)->Instance->CR2 : \
	740	(__HANDLE__)->Instance->CR3)) & (1U << (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK)))
	741
	742
	743	/** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
	744	* @param __HANDLE__ specifies the SMARTCARD Handle.
	745	* @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set
	746	* to clear the corresponding interrupt.
	747	* This parameter can be one of the following values:
	748	* @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag
	749	* @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag
	750	* @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag
	751	* @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag
	752	* @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detection clear flag
	753	* @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag
	754	* @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag
	755	* @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag
	756	* @retval None
	757	*/
	758	#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
	759
	760	/** @brief Set a specific SMARTCARD request flag.
	761	* @param __HANDLE__ specifies the SMARTCARD Handle.
	762	* @param __REQ__ specifies the request flag to set
	763	* This parameter can be one of the following values:
	764	* @arg @ref SMARTCARD_RXDATA_FLUSH_REQUEST Receive data flush Request
	765	* @arg @ref SMARTCARD_TXDATA_FLUSH_REQUEST Transmit data flush Request
	766	*
	767	* @retval None
	768	*/
	769	#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR \|= (uint16_t)(__REQ__))
	770
	771	/** @brief Enable the SMARTCARD one bit sample method.
	772	* @param __HANDLE__ specifies the SMARTCARD Handle.
	773	* @retval None
	774	*/
	775	#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\|= USART_CR3_ONEBIT)
	776
	777	/** @brief Disable the SMARTCARD one bit sample method.
	778	* @param __HANDLE__ specifies the SMARTCARD Handle.
	779	* @retval None
	780	*/
	781	#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
	782
	783	/** @brief Enable the USART associated to the SMARTCARD Handle.
	784	* @param __HANDLE__ specifies the SMARTCARD Handle.
	785	* @retval None
	786	*/
	787	#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 \|= USART_CR1_UE)
	788
	789	/** @brief Disable the USART associated to the SMARTCARD Handle
	790	* @param __HANDLE__ specifies the SMARTCARD Handle.
	791	* @retval None
	792	*/
	793	#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
	794
	795	/**
	796	* @}
	797	*/
	798
	799	/* Private macros -------------------------------------------------------------*/
	800	/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros
	801	* @{
	802	*/
	803
	804	/** @brief Check the Baud rate range.
	805	* @note The maximum Baud Rate is derived from the maximum clock on F0 (48 MHz)
	806	* divided by the oversampling used on the SMARTCARD (i.e. 16).
	807	* @param __BAUDRATE__ Baud rate set by the configuration function.
	808	* @retval Test result (TRUE or FALSE)
	809	*/
	810	#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 3000001U)
	811
	812	/** @brief Check the block length range.
	813	* @note The maximum SMARTCARD block length is 0xFF.
	814	* @param __LENGTH__ block length.
	815	* @retval Test result (TRUE or FALSE)
	816	*/
	817	#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFFU)
	818
	819	/** @brief Check the receiver timeout value.
	820	* @note The maximum SMARTCARD receiver timeout value is 0xFFFFFF.
	821	* @param __TIMEOUTVALUE__ receiver timeout value.
	822	* @retval Test result (TRUE or FALSE)
	823	*/
	824	#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU)
	825
	826	/** @brief Check the SMARTCARD autoretry counter value.
	827	* @note The maximum number of retransmissions is 0x7.
	828	* @param __COUNT__ number of retransmissions.
	829	* @retval Test result (TRUE or FALSE)
	830	*/
	831	#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7U)
	832
	833	/**
	834	* @brief Ensure that SMARTCARD frame length is valid.
	835	* @param __LENGTH__ SMARTCARD frame length.
	836	* @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
	837	*/
	838	#define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B)
	839
	840	/**
	841	* @brief Ensure that SMARTCARD frame number of stop bits is valid.
	842	* @param __STOPBITS__ SMARTCARD frame number of stop bits.
	843	* @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid)
	844	*/
	845	#define IS_SMARTCARD_STOPBITS(__STOPBITS__) (((__STOPBITS__) == SMARTCARD_STOPBITS_0_5) \|\|\
	846	((__STOPBITS__) == SMARTCARD_STOPBITS_1_5))
	847
	848	/**
	849	* @brief Ensure that SMARTCARD frame parity is valid.
	850	* @param __PARITY__ SMARTCARD frame parity.
	851	* @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid)
	852	*/
	853	#define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) \|\| \
	854	((__PARITY__) == SMARTCARD_PARITY_ODD))
	855
	856	/**
	857	* @brief Ensure that SMARTCARD communication mode is valid.
	858	* @param __MODE__ SMARTCARD communication mode.
	859	* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
	860	*/
	861	#define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & (uint16_t)0xFFF3U) == 0x00U) && ((__MODE__) != (uint16_t)0x00U))
	862
	863	/**
	864	* @brief Ensure that SMARTCARD frame polarity is valid.
	865	* @param __CPOL__ SMARTCARD frame polarity.
	866	* @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid)
	867	*/
	868	#define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW) \|\| ((__CPOL__) == SMARTCARD_POLARITY_HIGH))
	869
	870	/**
	871	* @brief Ensure that SMARTCARD frame phase is valid.
	872	* @param __CPHA__ SMARTCARD frame phase.
	873	* @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid)
	874	*/
	875	#define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) \|\| ((__CPHA__) == SMARTCARD_PHASE_2EDGE))
	876
	877	/**
	878	* @brief Ensure that SMARTCARD frame last bit clock pulse setting is valid.
	879	* @param __LASTBIT__ SMARTCARD frame last bit clock pulse setting.
	880	* @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid)
	881	*/
	882	#define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) \|\| \
	883	((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE))
	884
	885	/**
	886	* @brief Ensure that SMARTCARD frame sampling is valid.
	887	* @param __ONEBIT__ SMARTCARD frame sampling.
	888	* @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid)
	889	*/
	890	#define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) \|\| \
	891	((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE))
	892
	893	/**
	894	* @brief Ensure that SMARTCARD NACK transmission setting is valid.
	895	* @param __NACK__ SMARTCARD NACK transmission setting.
	896	* @retval SET (__NACK__ is valid) or RESET (__NACK__ is invalid)
	897	*/
	898	#define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) \|\| \
	899	((__NACK__) == SMARTCARD_NACK_DISABLE))
	900
	901	/**
	902	* @brief Ensure that SMARTCARD receiver timeout setting is valid.
	903	* @param __TIMEOUT__ SMARTCARD receiver timeout setting.
	904	* @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid)
	905	*/
	906	#define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) \|\| \
	907	((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE))
	908
	909	/**
	910	* @brief Ensure that SMARTCARD advanced features initialization is valid.
	911	* @param __INIT__ SMARTCARD advanced features initialization.
	912	* @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid)
	913	*/
	914	#define IS_SMARTCARD_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (SMARTCARD_ADVFEATURE_NO_INIT \| \
	915	SMARTCARD_ADVFEATURE_TXINVERT_INIT \| \
	916	SMARTCARD_ADVFEATURE_RXINVERT_INIT \| \
	917	SMARTCARD_ADVFEATURE_DATAINVERT_INIT \| \
	918	SMARTCARD_ADVFEATURE_SWAP_INIT \| \
	919	SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT \| \
	920	SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT \| \
	921	SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
	922
	923	/**
	924	* @brief Ensure that SMARTCARD frame TX inversion setting is valid.
	925	* @param __TXINV__ SMARTCARD frame TX inversion setting.
	926	* @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid)
	927	*/
	928	#define IS_SMARTCARD_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) \|\| \
	929	((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_ENABLE))
	930
	931	/**
	932	* @brief Ensure that SMARTCARD frame RX inversion setting is valid.
	933	* @param __RXINV__ SMARTCARD frame RX inversion setting.
	934	* @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid)
	935	*/
	936	#define IS_SMARTCARD_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) \|\| \
	937	((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_ENABLE))
	938
	939	/**
	940	* @brief Ensure that SMARTCARD frame data inversion setting is valid.
	941	* @param __DATAINV__ SMARTCARD frame data inversion setting.
	942	* @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid)
	943	*/
	944	#define IS_SMARTCARD_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) \|\| \
	945	((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE))
	946
	947	/**
	948	* @brief Ensure that SMARTCARD frame RX/TX pins swap setting is valid.
	949	* @param __SWAP__ SMARTCARD frame RX/TX pins swap setting.
	950	* @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid)
	951	*/
	952	#define IS_SMARTCARD_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) \|\| \
	953	((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_ENABLE))
	954
	955	/**
	956	* @brief Ensure that SMARTCARD frame overrun setting is valid.
	957	* @param __OVERRUN__ SMARTCARD frame overrun setting.
	958	* @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid)
	959	*/
	960	#define IS_SMARTCARD_OVERRUN(__OVERRUN__) (((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) \|\| \
	961	((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE))
	962
	963	/**
	964	* @brief Ensure that SMARTCARD DMA enabling or disabling on error setting is valid.
	965	* @param __DMA__ SMARTCARD DMA enabling or disabling on error setting.
	966	* @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid)
	967	*/
	968	#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) \|\| \
	969	((__DMA__) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR))
	970
	971	/**
	972	* @brief Ensure that SMARTCARD frame MSB first setting is valid.
	973	* @param __MSBFIRST__ SMARTCARD frame MSB first setting.
	974	* @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid)
	975	*/
	976	#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) \|\| \
	977	((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE))
	978
	979	/**
	980	* @brief Ensure that SMARTCARD request parameter is valid.
	981	* @param __PARAM__ SMARTCARD request parameter.
	982	* @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
	983	*/
	984	#define IS_SMARTCARD_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == SMARTCARD_RXDATA_FLUSH_REQUEST) \|\| \
	985	((__PARAM__) == SMARTCARD_TXDATA_FLUSH_REQUEST))
	986
	987	/**
	988	* @}
	989	*/
	990
	991	/* Include SMARTCARD HAL Extended module */
	992	#include "stm32f0xx_hal_smartcard_ex.h"
	993
	994	/* Exported functions --------------------------------------------------------*/
	995	/** @addtogroup SMARTCARD_Exported_Functions
	996	* @{
	997	*/
	998
	999	/* Initialization and de-initialization functions ****************************/
	1000
	1001	/** @addtogroup SMARTCARD_Exported_Functions_Group1
	1002	* @{
	1003	*/
	1004
	1005	HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard);
	1006	HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard);
	1007	void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard);
	1008	void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard);
	1009
	1010	/**
	1011	* @}
	1012	*/
	1013
	1014	/* IO operation functions *****************************************************/
	1015	/** @addtogroup SMARTCARD_Exported_Functions_Group2
	1016	* @{
	1017	*/
	1018
	1019	HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef hsmartcard, uint8_t pData, uint16_t Size, uint32_t Timeout);
	1020	HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef hsmartcard, uint8_t pData, uint16_t Size, uint32_t Timeout);
	1021	HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef hsmartcard, uint8_t pData, uint16_t Size);
	1022	HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef hsmartcard, uint8_t pData, uint16_t Size);
	1023	HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef hsmartcard, uint8_t pData, uint16_t Size);
	1024	HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef hsmartcard, uint8_t pData, uint16_t Size);
	1025	/* Transfer Abort functions */
	1026	HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard);
	1027	HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard);
	1028	HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard);
	1029	HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard);
	1030	HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
	1031	HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard);
	1032
	1033	void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard);
	1034	void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
	1035	void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
	1036	void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard);
	1037	void HAL_SMARTCARD_AbortCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard);
	1038	void HAL_SMARTCARD_AbortTransmitCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard);
	1039	void HAL_SMARTCARD_AbortReceiveCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard);
	1040
	1041	/**
	1042	* @}
	1043	*/
	1044
	1045	/* Peripheral State and Error functions ***************************************/
	1046	/** @addtogroup SMARTCARD_Exported_Functions_Group3
	1047	* @{
	1048	*/
	1049
	1050	HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard);
	1051	uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard);
	1052
	1053	/**
	1054	* @}
	1055	*/
	1056
	1057	/**
	1058	* @}
	1059	*/
	1060
	1061	/**
	1062	* @}
	1063	*/
	1064
	1065	/**
	1066	* @}
	1067	*/
	1068
	1069	#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
	1070
	1071	#ifdef __cplusplus
	1072	}
	1073	#endif
	1074
	1075	#endif /* __STM32F0xx_HAL_SMARTCARD_H */
	1076
	1077	/********************** (C) COPYRIGHT STMicroelectronics *END OF FILE**/
	1078