F030C8T6_Kbus_MIX.git

QuakeGod

2024-11-25 9aed5d7e7b3c7bf09da712e9c272ece401a7acc9

提交 \| 用户 \| age
8b51c7	1	//*****************************************************************************
Q	2	//
	3	//! \file wizchip_conf.h
	4	//! \brief WIZCHIP Config Header File.
	5	//! \version 1.0.0
	6	//! \date 2013/10/21
	7	//! \par Revision history
	8	//! <2013/10/21> 1st Release
	9	//! \author MidnightCow
	10	//! \copyright
	11	//!
	12	//! Copyright (c) 2013, WIZnet Co., LTD.
	13	//! All rights reserved.
	14	//!
	15	//! Redistribution and use in source and binary forms, with or without
	16	//! modification, are permitted provided that the following conditions
	17	//! are met:
	18	//!
	19	//! * Redistributions of source code must retain the above copyright
	20	//! notice, this list of conditions and the following disclaimer.
	21	//! * Redistributions in binary form must reproduce the above copyright
	22	//! notice, this list of conditions and the following disclaimer in the
	23	//! documentation and/or other materials provided with the distribution.
	24	//! * Neither the name of the <ORGANIZATION> nor the names of its
	25	//! contributors may be used to endorse or promote products derived
	26	//! from this software without specific prior written permission.
	27	//!
	28	//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	29	//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	30	//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	31	//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
	32	//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	33	//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	34	//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	35	//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	36	//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	37	//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
	38	//! THE POSSIBILITY OF SUCH DAMAGE.
	39	//
	40	//*****************************************************************************
	41
	42	/**
	43	* @defgroup extra_functions 2. WIZnet Extra Functions
	44	*
	45	* @brief These functions is optional function. It could be replaced at WIZCHIP I/O function because they were made by WIZCHIP I/O functions.
	46	* @details There are functions of configuring WIZCHIP, network, interrupt, phy, network information and timer. \n
	47	*
	48	*/
	49
	50	#ifndef _WIZCHIP_CONF_H_
	51	#define _WIZCHIP_CONF_H_
	52
	53	#include <stdint.h>
	54	/**
	55	* @brief Select WIZCHIP.
	56	* @todo You should select one, \b 5100, \b 5200 ,\b 5500 or etc. \n\n
	57	* ex> <code> #define \_WIZCHIP_ 5500 </code>
	58	*/
	59	#define _WIZCHIP_ 5500 // 5100, 5200, 5500
	60
	61	#define _WIZCHIP_IO_MODE_NONE_ 0x0000
	62	#define _WIZCHIP_IO_MODE_BUS_ 0x0100 /*< Bus interface mode /
	63	#define _WIZCHIP_IO_MODE_SPI_ 0x0200 /*< SPI interface mode /
	64	//#define _WIZCHIP_IO_MODE_IIC_ 0x0400
	65	//#define _WIZCHIP_IO_MODE_SDIO_ 0x0800
	66	// Add to
	67	//
	68
	69	#define _WIZCHIP_IO_MODE_BUS_DIR_ (_WIZCHIP_IO_MODE_BUS_ + 1) /*< BUS interface mode for direct /
	70	#define _WIZCHIP_IO_MODE_BUS_INDIR_ (_WIZCHIP_IO_MODE_BUS_ + 2) /*< BUS interface mode for indirect /
	71
	72	#define _WIZCHIP_IO_MODE_SPI_VDM_ (_WIZCHIP_IO_MODE_SPI_ + 1) /*< SPI interface mode for variable length data/
	73	#define _WIZCHIP_IO_MODE_SPI_FDM_ (_WIZCHIP_IO_MODE_SPI_ + 2) /*< SPI interface mode for fixed length data mode/
	74
	75
	76	#if (_WIZCHIP_ == 5100)
	77	#define _WIZCHIP_ID_ "W5100\0"
	78	/**
	79	* @brief Define interface mode.
	80	* @todo you should select interface mode as chip. Select one of @ref \_WIZCHIP_IO_MODE_SPI_ , @ref \_WIZCHIP_IO_MODE_BUS_DIR_ or @ref \_WIZCHIP_IO_MODE_BUS_INDIR_
	81	*/
	82
	83	// #define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_BUS_DIR_
	84	// #define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_BUS_INDIR_
	85	#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_
	86
	87	#elif (_WIZCHIP_ == 5200)
	88	#define _WIZCHIP_ID_ "W5200\0"
	89	/**
	90	* @brief Define interface mode.
	91	* @todo you should select interface mode as chip. Select one of @ref \_WIZCHIP_IO_MODE_SPI_ or @ref \_WIZCHIP_IO_MODE_BUS_INDIR_
	92	*/
	93	// #define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_BUS_INDIR_
	94	#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_
	95	#include "W5200/w5200.h"
	96	#elif (_WIZCHIP_ == 5500)
	97	#define _WIZCHIP_ID_ "W5500\0"
	98
	99	/**
	100	* @brief Define interface mode. \n
	101	* @todo Should select interface mode as chip.
	102	* - @ref \_WIZCHIP_IO_MODE_SPI_ \n
	103	* -@ref \_WIZCHIP_IO_MODE_SPI_VDM_ : Valid only in @ref \_WIZCHIP_ == 5500 \n
	104	* -@ref \_WIZCHIP_IO_MODE_SPI_FDM_ : Valid only in @ref \_WIZCHIP_ == 5500 \n
	105	* - @ref \_WIZCHIP_IO_MODE_BUS_ \n
	106	* - @ref \_WIZCHIP_IO_MODE_BUS_DIR_ \n
	107	* - @ref \_WIZCHIP_IO_MODE_BUS_INDIR_ \n
	108	* - Others will be defined in future. \n\n
	109	* ex> <code> #define \_WIZCHIP_IO_MODE_ \_WIZCHIP_IO_MODE_SPI_VDM_ </code>
	110	*
	111	*/
	112	//#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_FDM_
	113	#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_VDM_
	114	#include "W5500/w5500.h"
	115	#else
	116	#error "Unknown defined _WIZCHIP_. You should define one of 5100, 5200, and 5500 !!!"
	117	#endif
	118
	119	#ifndef _WIZCHIP_IO_MODE_
	120	#error "Undefined _WIZCHIP_IO_MODE_. You should define it !!!"
	121	#endif
	122
	123	/**
	124	* @brief Define I/O base address when BUS IF mode.
	125	* @todo Should re-define it to fit your system when BUS IF Mode (@ref \_WIZCHIP_IO_MODE_BUS_,
	126	* @ref \_WIZCHIP_IO_MODE_BUS_DIR_, @ref \_WIZCHIP_IO_MODE_BUS_INDIR_). \n\n
	127	* ex> <code> #define \_WIZCHIP_IO_BASE_ 0x00008000 </code>
	128	*/
	129	#define _WIZCHIP_IO_BASE_ 0x00000000 //
	130
	131	#if _WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_BUS
	132	#ifndef _WIZCHIP_IO_BASE_
	133	#error "You should be define _WIZCHIP_IO_BASE to fit your system memory map."
	134	#endif
	135	#endif
	136
	137	#if _WIZCHIP_ > 5100
	138	#define _WIZCHIP_SOCK_NUM_ 8 ///< The count of independant socket of @b WIZCHIP
	139	#else
	140	#define _WIZCHIP_SOCK_NUM_ 4 ///< The count of independant socket of @b WIZCHIP
	141	#endif
	142
	143
	144	/********************************************************
	145	* WIZCHIP BASIC IF functions for SPI, SDIO, I2C , ETC.
	146	*********************************************************/
	147	/**
	148	* @ingroup DATA_TYPE
	149	* @brief The set of callback functions for W5500:@ref WIZCHIP_IO_Functions W5200:@ref WIZCHIP_IO_Functions_W5200
	150	*/
	151	typedef struct __WIZCHIP
	152	{
	153	uint16_t if_mode; ///< host interface mode
	154	uint8_t id[6]; ///< @b WIZCHIP ID such as @b 5100, @b 5200, @b 5500, and so on.
	155	/**
	156	* The set of critical section callback func.
	157	*/
	158	struct _CRIS
	159	{
	160	void (*_enter) (void); ///< crtical section enter
	161	void (*_exit) (void); ///< critial section exit
	162	}CRIS;
	163	/**
	164	* The set of @ref\_WIZCHIP_ select control callback func.
	165	*/
	166	struct _CS
	167	{
	168	void (*_select) (void); ///< @ref \_WIZCHIP_ selected
	169	void (*_deselect)(void); ///< @ref \_WIZCHIP_ deselected
	170	}CS;
	171	/**
	172	* The set of interface IO callback func.
	173	*/
	174	union _IF
	175	{
	176	/**
	177	* For BUS interface IO
	178	*/
	179	struct
	180	{
	181	uint8_t (*_read_byte) (uint32_t AddrSel);
	182	void (*_write_byte) (uint32_t AddrSel, uint8_t wb);
	183	}BUS;
	184	/**
	185	* For SPI interface IO
	186	*/
	187	struct
	188	{
	189	uint8_t (*_read_byte) (void);
	190	void (*_write_byte) (uint8_t wb);
	191	}SPI;
	192	// To be added
	193	//
	194	}IF;
	195	}_WIZCHIP;
	196
	197	extern _WIZCHIP WIZCHIP;
	198
	199	/**
	200	* @ingroup DATA_TYPE
	201	* WIZCHIP control type enumration used in @ref ctlwizchip().
	202	*/
	203	typedef enum
	204	{
	205	CW_RESET_WIZCHIP, ///< Resets WIZCHIP by softly
	206	CW_INIT_WIZCHIP, ///< Inializes to WIZCHIP with SOCKET buffer size 2 or 1 dimension array typed uint8_t.
	207	CW_GET_INTERRUPT, ///< Get Interrupt status of WIZCHIP
	208	CW_CLR_INTERRUPT, ///< Clears interrupt
	209	CW_SET_INTRMASK, ///< Masks interrupt
	210	CW_GET_INTRMASK, ///< Get interrupt mask
	211	CW_SET_INTRTIME, ///< Set interval time between the current and next interrupt.
	212	CW_GET_INTRTIME, ///< Set interval time between the current and next interrupt.
	213	CW_GET_ID, ///< Gets WIZCHIP name.
	214
	215	#if _WIZCHIP_ == 5500
	216	CW_RESET_PHY, ///< Resets internal PHY. Valid Only W5000
	217	CW_SET_PHYCONF, ///< When PHY configured by interal register, PHY operation mode (Manual/Auto, 10/100, Half/Full). Valid Only W5000
	218	CW_GET_PHYCONF, ///< Get PHY operation mode in interal register. Valid Only W5000
	219	CW_GET_PHYSTATUS, ///< Get real PHY status on operating. Valid Only W5000
	220	CW_SET_PHYPOWMODE, ///< Set PHY power mode as noraml and down when PHYSTATUS.OPMD == 1. Valid Only W5000
	221	#endif
	222	CW_GET_PHYPOWMODE, ///< Get PHY Power mode as down or normal
	223	CW_GET_PHYLINK ///< Get PHY Link status
	224	}ctlwizchip_type;
	225
	226	/**
	227	* @ingroup DATA_TYPE
	228	* Network control type enumration used in @ref ctlnetwork().
	229	*/
	230	typedef enum
	231	{
	232	CN_SET_NETINFO, ///< Set Network with @ref wiz_NetInfo
	233	CN_GET_NETINFO, ///< Get Network with @ref wiz_NetInfo
	234	CN_SET_NETMODE, ///< Set network mode as WOL, PPPoE, Ping Block, and Force ARP mode
	235	CN_GET_NETMODE, ///< Get network mode as WOL, PPPoE, Ping Block, and Force ARP mode
	236	CN_SET_TIMEOUT, ///< Set network timeout as retry count and time.
	237	CN_GET_TIMEOUT, ///< Get network timeout as retry count and time.
	238	}ctlnetwork_type;
	239
	240	/**
	241	* @ingroup DATA_TYPE
	242	* Interrupt kind when CW_SET_INTRRUPT, CW_GET_INTERRUPT, CW_SET_INTRMASK
	243	* and CW_GET_INTRMASK is used in @ref ctlnetwork().
	244	* It can be used with OR operation.
	245	*/
	246	typedef enum
	247	{
	248	#if _WIZCHIP_ > 5200
	249	IK_WOL = (1 << 4), ///< Wake On Lan by receiving the magic packet. Valid in W500.
	250	#endif
	251
	252	IK_PPPOE_TERMINATED = (1 << 5), ///< PPPoE Disconnected
	253
	254	#if _WIZCHIP_ != 5200
	255	IK_DEST_UNREACH = (1 << 6), ///< Destination IP & Port Unreable, No use in W5200
	256	#endif
	257
	258	IK_IP_CONFLICT = (1 << 7), ///< IP conflict occurred
	259
	260	IK_SOCK_0 = (1 << 8), ///< Socket 0 interrupt
	261	IK_SOCK_1 = (1 << 9), ///< Socket 1 interrupt
	262	IK_SOCK_2 = (1 << 10), ///< Socket 2 interrupt
	263	IK_SOCK_3 = (1 << 11), ///< Socket 3 interrupt
	264	#if _WIZCHIP_ > 5100
	265	IK_SOCK_4 = (1 << 12), ///< Socket 4 interrupt, No use in 5100
	266	IK_SOCK_5 = (1 << 13), ///< Socket 5 interrupt, No use in 5100
	267	IK_SOCK_6 = (1 << 14), ///< Socket 6 interrupt, No use in 5100
	268	IK_SOCK_7 = (1 << 15), ///< Socket 7 interrupt, No use in 5100
	269	#endif
	270
	271	#if _WIZCHIP_ > 5100
	272	IK_SOCK_ALL = (0xFF << 8) ///< All Socket interrpt
	273	#else
	274	IK_SOCK_ALL = (0x0F << 8) ///< All Socket interrpt
	275	#endif
	276	}intr_kind;
	277
	278	#define PHY_CONFBY_HW 0 ///< Configured PHY operation mode by HW pin
	279	#define PHY_CONFBY_SW 1 ///< Configured PHY operation mode by SW register
	280	#define PHY_MODE_MANUAL 0 ///< Configured PHY operation mode with user setting.
	281	#define PHY_MODE_AUTONEGO 1 ///< Configured PHY operation mode with auto-negotiation
	282	#define PHY_SPEED_10 0 ///< Link Speed 10
	283	#define PHY_SPEED_100 1 ///< Link Speed 100
	284	#define PHY_DUPLEX_HALF 0 ///< Link Half-Duplex
	285	#define PHY_DUPLEX_FULL 1 ///< Link Full-Duplex
	286	#define PHY_LINK_OFF 0 ///< Link Off
	287	#define PHY_LINK_ON 1 ///< Link On
	288	#define PHY_POWER_NORM 0 ///< PHY power normal mode
	289	#define PHY_POWER_DOWN 1 ///< PHY power down mode
	290
	291
	292	#if _WIZCHIP_ == 5500
	293	/**
	294	* @ingroup DATA_TYPE
	295	* It configures PHY configuration when CW_SET PHYCONF or CW_GET_PHYCONF in W5500,
	296	* and it indicates the real PHY status configured by HW or SW in all WIZCHIP. \n
	297	* Valid only in W5500.
	298	*/
	299	typedef struct wiz_PhyConf_t
	300	{
	301	uint8_t by; ///< set by @ref PHY_CONFBY_HW or @ref PHY_CONFBY_SW
	302	uint8_t mode; ///< set by @ref PHY_MODE_MANUAL or @ref PHY_MODE_AUTONEGO
	303	uint8_t speed; ///< set by @ref PHY_SPEED_10 or @ref PHY_SPEED_100
	304	uint8_t duplex; ///< set by @ref PHY_DUPLEX_HALF @ref PHY_DUPLEX_FULL
	305	//uint8_t power; ///< set by @ref PHY_POWER_NORM or @ref PHY_POWER_DOWN
	306	//uint8_t link; ///< Valid only in CW_GET_PHYSTATUS. set by @ref PHY_LINK_ON or PHY_DUPLEX_OFF
	307	}wiz_PhyConf;
	308	#endif
	309
	310	/**
	311	* @ingroup DATA_TYPE
	312	* It used in setting dhcp_mode of @ref wiz_NetInfo.
	313	*/
	314	typedef enum
	315	{
	316	NETINFO_STATIC = 1, ///< Static IP configuration by manually.
	317	NETINFO_DHCP ///< Dynamic IP configruation from a DHCP sever
	318	}dhcp_mode;
	319
	320	/**
	321	* @ingroup DATA_TYPE
	322	* Network Information for WIZCHIP
	323	*/
	324	typedef struct wiz_NetInfo_t
	325	{
	326	uint8_t mac[6]; ///< Source Mac Address
	327	uint8_t ip[4]; ///< Source IP Address
	328	uint8_t sn[4]; ///< Subnet Mask
	329	uint8_t gw[4]; ///< Gateway IP Address
	330	uint8_t dns[4]; ///< DNS server IP Address
	331	dhcp_mode dhcp; ///< 1 - Static, 2 - DHCP
	332	}wiz_NetInfo;
	333
	334	/**
	335	* @ingroup DATA_TYPE
	336	* Network mode
	337	*/
	338	typedef enum
	339	{
	340	#if _WIZCHIP_ == 5500
	341	NM_FORCEARP = (1<<1), ///< Force to APP send whenever udp data is sent. Valid only in W5500
	342	#endif
	343	NM_WAKEONLAN = (1<<5), ///< Wake On Lan
	344	NM_PINGBLOCK = (1<<4), ///< Block ping-request
	345	NM_PPPOE = (1<<3), ///< PPPoE mode
	346	}netmode_type;
	347
	348	/**
	349	* @ingroup DATA_TYPE
	350	* Used in CN_SET_TIMEOUT or CN_GET_TIMEOUT of @ref ctlwizchip() for timeout configruation.
	351	*/
	352	typedef struct wiz_NetTimeout_t
	353	{
	354	uint8_t retry_cnt; ///< retry count
	355	uint16_t time_100us; ///< time unit 100us
	356	}wiz_NetTimeout;
	357
	358	/**
	359	*@brief Registers call back function for critical section of I/O functions such as
	360	*\ref WIZCHIP_READ, @ref WIZCHIP_WRITE, @ref WIZCHIP_READ_BUF and @ref WIZCHIP_WRITE_BUF.
	361	*@param cris_en : callback function for critical section enter.
	362	*@param cris_ex : callback function for critical section exit.
	363	*@todo Describe @ref WIZCHIP_CRITICAL_ENTER and @ref WIZCHIP_CRITICAL_EXIT marco or register your functions.
	364	*@note If you do not describe or register, default functions(@ref wizchip_cris_enter & @ref wizchip_cris_exit) is called.
	365	*/
	366	void reg_wizchip_cris_cbfunc(void(cris_en)(void), void(cris_ex)(void));
	367
	368
	369	/**
	370	*@brief Registers call back function for WIZCHIP select & deselect.
	371	*@param cs_sel : callback function for WIZCHIP select
	372	*@param cs_desel : callback fucntion for WIZCHIP deselect
	373	*@todo Describe @ref wizchip_cs_select and @ref wizchip_cs_deselect function or register your functions.
	374	*@note If you do not describe or register, null function is called.
	375	*/
	376	void reg_wizchip_cs_cbfunc(void(cs_sel)(void), void(cs_desel)(void));
	377
	378	/**
	379	*@brief Registers call back function for bus interface.
	380	*@param bus_rb : callback function to read byte data using system bus
	381	*@param bus_wb : callback function to write byte data using system bus
	382	*@todo Describe @ref wizchip_bus_readbyte and @ref wizchip_bus_writebyte function
	383	*or register your functions.
	384	*@note If you do not describe or register, null function is called.
	385	*/
	386	void reg_wizchip_bus_cbfunc(uint8_t (bus_rb)(uint32_t addr), void (bus_wb)(uint32_t addr, uint8_t wb));
	387
	388	/**
	389	*@brief Registers call back function for SPI interface.
	390	*@param spi_rb : callback function to read byte usig SPI
	391	*@param spi_wb : callback function to write byte usig SPI
	392	*@todo Describe \ref wizchip_spi_readbyte and \ref wizchip_spi_writebyte function
	393	*or register your functions.
	394	*@note If you do not describe or register, null function is called.
	395	*/
	396	void reg_wizchip_spi_cbfunc(uint8_t (spi_rb)(void), void (spi_wb)(uint8_t wb));
	397
	398	/**
	399	* @ingroup extra_functions
	400	* @brief Controls to the WIZCHIP.
	401	* @details Resets WIZCHIP & internal PHY, Configures PHY mode, Monitor PHY(Link,Speed,Half/Full/Auto),
	402	* controls interrupt & mask and so on.
	403	* @param cwtype : Decides to the control type
	404	* @param arg : arg type is dependent on cwtype.
	405	* @return 0 : Success \n
	406	* -1 : Fail because of invalid \ref ctlwizchip_type or unsupported \ref ctlwizchip_type in WIZCHIP
	407	*/
	408	int8_t ctlwizchip(ctlwizchip_type cwtype, void* arg);
	409
	410	/**
	411	* @ingroup extra_functions
	412	* @brief Controls to network.
	413	* @details Controls to network environment, mode, timeout and so on.
	414	* @param cntype : Input. Decides to the control type
	415	* @param arg : Inout. arg type is dependent on cntype.
	416	* @return -1 : Fail because of invalid \ref ctlnetwork_type or unsupported \ref ctlnetwork_type in WIZCHIP \n
	417	* 0 : Success
	418	*/
	419	int8_t ctlnetwork(ctlnetwork_type cntype, void* arg);
	420
	421
	422	/*
	423	* The following functions are implemented for internal use.
	424	* but You can call these functions for code size reduction instead of ctlwizchip() and ctlnetwork().
	425	*/
	426
	427	/**
	428	* @ingroup extra_functions
	429	* @brief Reset WIZCHIP by softly.
	430	*/
	431	void wizchip_sw_reset(void);
	432
	433	/**
	434	* @ingroup extra_functions
	435	* @brief Initializes WIZCHIP with socket buffer size
	436	* @param txsize Socket tx buffer sizes. If null, initialized the default size 2KB.
	437	* @param rxsize Socket rx buffer sizes. If null, initialized the default size 2KB.
	438	* @return 0 : succcess \n
	439	* -1 : fail. Invalid buffer size
	440	*/
	441	int8_t wizchip_init(uint8_t* txsize, uint8_t* rxsize);
	442
	443	/**
	444	* @ingroup extra_functions
	445	* @brief Clear Interrupt of WIZCHIP.
	446	* @param intr : @ref intr_kind value operated OR. It can type-cast to uint16_t.
	447	*/
	448	void wizchip_clrinterrupt(intr_kind intr);
	449
	450	/**
	451	* @ingroup extra_functions
	452	* @brief Get Interrupt of WIZCHIP.
	453	* @return @ref intr_kind value operated OR. It can type-cast to uint16_t.
	454	*/
	455	intr_kind wizchip_getinterrupt(void);
	456
	457	/**
	458	* @ingroup extra_functions
	459	* @brief Mask or Unmask Interrupt of WIZCHIP.
	460	* @param intr : @ref intr_kind value operated OR. It can type-cast to uint16_t.
	461	*/
	462	void wizchip_setinterruptmask(intr_kind intr);
	463
	464	/**
	465	* @ingroup extra_functions
	466	* @brief Get Interrupt mask of WIZCHIP.
	467	* @return : The operated OR vaule of @ref intr_kind. It can type-cast to uint16_t.
	468	*/
	469	intr_kind wizchip_getinterruptmask(void);
	470
	471	#if _WIZCHIP_ > 5100
	472	int8_t wizphy_getphylink(void); ///< get the link status of phy in WIZCHIP. No use in W5100
	473	int8_t wizphy_getphypmode(void); ///< get the power mode of PHY in WIZCHIP. No use in W5100
	474	#endif
	475
	476	#if _WIZCHIP_ == 5500
	477	void wizphy_reset(void); ///< Reset phy. Vailid only in W5500
	478	/**
	479	* @ingroup extra_functions
	480	* @brief Set the phy information for WIZCHIP without power mode
	481	* @param phyconf : @ref wiz_PhyConf
	482	*/
	483	void wizphy_setphyconf(wiz_PhyConf* phyconf);
	484	/**
	485	* @ingroup extra_functions
	486	* @brief Get phy configuration information.
	487	* @param phyconf : @ref wiz_PhyConf
	488	*/
	489	void wizphy_getphyconf(wiz_PhyConf* phyconf);
	490	/**
	491	* @ingroup extra_functions
	492	* @brief Get phy status.
	493	* @param phyconf : @ref wiz_PhyConf
	494	*/
	495	void wizphy_getphystat(wiz_PhyConf* phyconf);
	496	/**
	497	* @ingroup extra_functions
	498	* @brief set the power mode of phy inside WIZCHIP. Refer to @ref PHYCFGR in W5500, @ref PHYSTATUS in W5200
	499	* @param pmode Settig value of power down mode.
	500	*/
	501	int8_t wizphy_setphypmode(uint8_t pmode);
	502	#endif
	503
	504	/**
	505	* @ingroup extra_functions
	506	* @brief Set the network information for WIZCHIP
	507	* @param pnetinfo : @ref wizNetInfo
	508	*/
	509	void wizchip_setnetinfo(wiz_NetInfo* pnetinfo);
	510
	511	/**
	512	* @ingroup extra_functions
	513	* @brief Get the network information for WIZCHIP
	514	* @param pnetinfo : @ref wizNetInfo
	515	*/
	516	void wizchip_getnetinfo(wiz_NetInfo* pnetinfo);
	517
	518	/**
	519	* @ingroup extra_functions
	520	* @brief Set the network mode such WOL, PPPoE, Ping Block, and etc.
	521	* @param pnetinfo Value of network mode. Refer to @ref netmode_type.
	522	*/
	523	int8_t wizchip_setnetmode(netmode_type netmode);
	524
	525	/**
	526	* @ingroup extra_functions
	527	* @brief Get the network mode such WOL, PPPoE, Ping Block, and etc.
	528	* @return Value of network mode. Refer to @ref netmode_type.
	529	*/
	530	netmode_type wizchip_getnetmode(void);
	531
	532	/**
	533	* @ingroup extra_functions
	534	* @brief Set retry time value(@ref RTR) and retry count(@ref RCR).
	535	* @details @ref RTR configures the retransmission timeout period and @ref RCR configures the number of time of retransmission.
	536	* @param nettime @ref RTR value and @ref RCR value. Refer to @ref wiz_NetTimeout.
	537	*/
	538	void wizchip_settimeout(wiz_NetTimeout* nettime);
	539
	540	/**
	541	* @ingroup extra_functions
	542	* @brief Get retry time value(@ref RTR) and retry count(@ref RCR).
	543	* @details @ref RTR configures the retransmission timeout period and @ref RCR configures the number of time of retransmission.
	544	* @param nettime @ref RTR value and @ref RCR value. Refer to @ref wiz_NetTimeout.
	545	*/
	546	void wizchip_gettimeout(wiz_NetTimeout* nettime);
	547
	548	#endif // _WIZCHIP_CONF_H_