| 提交 | 用户 | age | ||
| 5dd1b7 | 1 | /** |
| Q | 2 | ****************************************************************************** |
| 3 | * @file : BSP.c | |
| 4 | * @brief : Board Speciafic program | |
| 5 | ****************************************************************************** | |
| 6 | * | |
| 7 | ****************************************************************************** | |
| 8 | */ | |
| 9 | /* Includes ------------------------------------------------------------------*/ | |
| 10 | ||
| 11 | #include "BSP.h" | |
| 12 | ||
| 13 | #include "Globaldef.h" | |
| 14 | #include "Functions.h" | |
| 15 | #if (BOARD_TYPE == 14) | |
| 16 | #include "fpx.h" | |
| 17 | #endif | |
| 18 | ||
| 19 | /* | |
| 20 | if ((nCurTick &0xff) ==0) | |
| 21 | { | |
| 22 | if (freqdir) { freq+=1+freq/10;if (freq>=1500) {freq=1500;freqdir=0;}} | |
| 23 | else {freq-=1+freq/10;if (freq<=10) {freq=10;freqdir=1;} } | |
| 24 | } | |
| 25 | */ | |
| 26 | ||
| 27 | /* | |
| 28 | static int outputsum=0; | |
| 29 | static int freq=10; | |
| 30 | static int freqdir=1; | |
| 31 | static int phase=0; | |
| 32 | static int somb=0; | |
| 33 | static int len=0; | |
| 34 | static int curbb=0; | |
| 35 | ||
| 36 | if ((nCurTick &0x3ff) ==1) | |
| 37 | { | |
| 38 | curbb++; | |
| 39 | if (curbb+1==len) | |
| 40 | { | |
| 41 | // freq=0; | |
| 42 | }else if (curbb>=len) | |
| 43 | { | |
| 44 | somb=musictab1[cur_musicpos*2]; | |
| 45 | len=musictab1[cur_musicpos*2+1]; | |
| 46 | freq=freqtab[somb]; | |
| 47 | curbb=0;cur_musicpos++; if (cur_musicpos >= Totalmusiccount) {cur_musicpos=0;} | |
| 48 | } | |
| 49 | } | |
| 50 | if ((nCurTick &0x3ff) ==0x1ff) | |
| 51 | { | |
| 52 | if (curbb+1==len) | |
| 53 | { | |
| 54 | freq=0; | |
| 55 | } | |
| 56 | } | |
| 57 | phase+=freq; | |
| 58 | if (phase>=5000) {phase-=5000;} | |
| 59 | ||
| 60 | ||
| 61 | if (outtype==1) | |
| 62 | { | |
| 63 | outputsum+=freq; | |
| 64 | if (outputsum>=5000) | |
| 65 | { | |
| 66 | //LL_GPIO_SetOutputPin(GPIOB,LL_GPIO_PIN_3); | |
| 67 | LL_GPIO_TogglePin(GPIOB,LL_GPIO_PIN_3); | |
| 68 | outputsum-=5000; | |
| 69 | } | |
| 70 | else | |
| 71 | { | |
| 72 | //LL_GPIO_ResetOutputPin(GPIOB,LL_GPIO_PIN_3); | |
| 73 | } | |
| 74 | }else if (outtype==2) | |
| 75 | { | |
| 76 | const int volume = 2500; | |
| 77 | int amp; | |
| 78 | if (phase<1250) | |
| 79 | { | |
| 80 | amp=2500+sintab[(phase -0)*256/1250]*volume/256; | |
| 81 | ||
| 82 | }else if (phase <2500) | |
| 83 | { | |
| 84 | amp=2500+sintab[(2500-1-phase)*256/1250]*volume/256; | |
| 85 | }else if (phase <3750) | |
| 86 | { | |
| 87 | amp=2500-sintab[(phase-2500)*256/1250]*volume/256; | |
| 88 | }else | |
| 89 | { | |
| 90 | amp=2500-sintab[(5000-1-phase)*256/1250]*volume/256; | |
| 91 | } | |
| 92 | outputsum+=amp; | |
| 93 | if (outputsum>=5000) | |
| 94 | { | |
| 95 | LL_GPIO_SetOutputPin(GPIOB,LL_GPIO_PIN_3); | |
| 96 | //LL_GPIO_TogglePin(GPIOB,LL_GPIO_PIN_3); | |
| 97 | outputsum-=5000; | |
| 98 | } | |
| 99 | else | |
| 100 | { | |
| 101 | LL_GPIO_ResetOutputPin(GPIOB,LL_GPIO_PIN_3); | |
| 102 | } | |
| 103 | } | |
| 104 | */ | |
| 105 | ||
| 106 | ||
| 107 | /** | |
| 108 | * @brief System Clock Configuration | |
| 109 | * @retval None | |
| 110 | */ | |
| 111 | ||
| 112 | void SystemClock_Config(void) | |
| 113 | { | |
| 114 | RCC_OscInitTypeDef RCC_OscInitStruct = {0}; | |
| 115 | RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; | |
| 116 | ||
| 117 | /** Initializes the CPU, AHB and APB busses clocks | |
| 118 | */ | |
| 119 | RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; | |
| 120 | RCC_OscInitStruct.HSEState = RCC_HSE_ON; | |
| 121 | RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; | |
| 122 | RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; | |
| 123 | // RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; | |
| 124 | ||
| 125 | #if (XLAT_FREQ == 12) | |
| 126 | RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV3; | |
| 127 | #else | |
| 128 | RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV2; | |
| 129 | #endif | |
| 130 | ||
| 131 | RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; | |
| 132 | if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) | |
| 133 | { | |
| 134 | Error_Handler(); | |
| 135 | } | |
| 136 | /** Initializes the CPU, AHB and APB busses clocks | |
| 137 | */ | |
| 138 | RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK | |
| 139 | |RCC_CLOCKTYPE_PCLK1; | |
| 140 | RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; | |
| 141 | RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; | |
| 142 | RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; | |
| 143 | ||
| 144 | if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) | |
| 145 | { | |
| 146 | Error_Handler(); | |
| 147 | } | |
| 148 | ||
| 149 | //RCC_OscInitTypeDef RCC_OscInitStruct; | |
| 150 | //RCC_ClkInitTypeDef RCC_ClkInitStruct; | |
| 151 | RCC_PeriphCLKInitTypeDef PeriphClkInit; | |
| 152 | ||
| 153 | /**Initializes the CPU, AHB and APB busses clocks | |
| 154 | */ | |
| 155 | ||
| 156 | PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1; | |
| 157 | PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_SYSCLK; | |
| 158 | ||
| 159 | if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) | |
| 160 | { | |
| 161 | _Error_Handler(__FILE__, __LINE__); | |
| 162 | } | |
| 163 | ||
| 164 | /**Configure the Systick interrupt time | |
| 165 | */ | |
| 166 | // HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/10000); | |
| 167 | HAL_SYSTICK_Config(48000000/10000); | |
| 168 | ||
| 169 | /**Configure the Systick | |
| 170 | */ | |
| 171 | HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK); | |
| 172 | ||
| 173 | /* SysTick_IRQn interrupt configuration */ | |
| 174 | HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0); | |
| 175 | } | |
| 176 | ||
| 177 | void MX_IWDG_Init(void) | |
| 178 | { | |
| 179 | ||
| 180 | /* USER CODE BEGIN IWDG_Init 0 */ | |
| 181 | ||
| 182 | /* USER CODE END IWDG_Init 0 */ | |
| 183 | ||
| 184 | /* USER CODE BEGIN IWDG_Init 1 */ | |
| 185 | ||
| 186 | /* USER CODE END IWDG_Init 1 */ | |
| 187 | LL_IWDG_Enable(IWDG); | |
| 188 | LL_IWDG_EnableWriteAccess(IWDG); | |
| 189 | LL_IWDG_SetPrescaler(IWDG, LL_IWDG_PRESCALER_64); | |
| 190 | LL_IWDG_SetReloadCounter(IWDG, 4095); | |
| 191 | while (LL_IWDG_IsReady(IWDG) != 1) | |
| 192 | { | |
| 193 | } | |
| 194 | ||
| 195 | LL_IWDG_SetWindow(IWDG, 4095); | |
| 196 | LL_IWDG_ReloadCounter(IWDG); | |
| 197 | /* USER CODE BEGIN IWDG_Init 2 */ | |
| 198 | ||
| 199 | /* USER CODE END IWDG_Init 2 */ | |
| 200 | ||
| 201 | } | |
| 202 | /** | |
| 203 | * @brief TIM6 Initialization Function | |
| 204 | * @param None | |
| 205 | * @retval None | |
| 206 | */ | |
| 207 | void MX_TIM6_Init(void) | |
| 208 | { | |
| 209 | ||
| 210 | /* USER CODE BEGIN TIM6_Init 0 */ | |
| 211 | ||
| 212 | /* USER CODE END TIM6_Init 0 */ | |
| 213 | ||
| 214 | LL_TIM_InitTypeDef TIM_InitStruct = {0}; | |
| 215 | ||
| 216 | /* Peripheral clock enable */ | |
| 217 | LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM6); | |
| 218 | ||
| 219 | /* TIM6 interrupt Init */ | |
| 220 | NVIC_SetPriority(TIM6_IRQn, 0); | |
| 221 | NVIC_EnableIRQ(TIM6_IRQn); | |
| 222 | ||
| 223 | /* USER CODE BEGIN TIM6_Init 1 */ | |
| 224 | ||
| 225 | /* USER CODE END TIM6_Init 1 */ | |
| 226 | TIM_InitStruct.Prescaler = 47; | |
| 227 | TIM_InitStruct.CounterMode = LL_TIM_COUNTERMODE_UP; | |
| 228 | TIM_InitStruct.Autoreload = 999; | |
| 229 | LL_TIM_Init(TIM6, &TIM_InitStruct); | |
| 230 | LL_TIM_DisableARRPreload(TIM6); | |
| 231 | /* USER CODE BEGIN TIM6_Init 2 */ | |
| 232 | LL_TIM_EnableIT_UPDATE(TIM6); | |
| 233 | /* USER CODE END TIM6_Init 2 */ | |
| 234 | ||
| 235 | } | |
| 236 | /* ADC init function */ | |
| 237 | void MX_ADC_Init(void) | |
| 238 | { | |
| 239 | ||
| 240 | LL_ADC_InitTypeDef ADC_InitStruct; | |
| 241 | LL_ADC_REG_InitTypeDef ADC_REG_InitStruct; | |
| 242 | ||
| 243 | /* Peripheral clock enable */ | |
| 244 | LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_ADC1); | |
| 245 | ||
| 246 | /**Configure Regular Channel | |
| 247 | */ | |
| 248 | LL_ADC_REG_SetSequencerChAdd(ADC1, LL_ADC_CHANNEL_0|LL_ADC_CHANNEL_1); | |
| 249 | ||
| 250 | LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(ADC1), LL_ADC_PATH_INTERNAL_TEMPSENSOR|LL_ADC_PATH_INTERNAL_VREFINT); | |
| 251 | ||
| 252 | /**Configure Regular Channel | |
| 253 | */ | |
| 254 | LL_ADC_REG_SetSequencerChAdd(ADC1, LL_ADC_CHANNEL_TEMPSENSOR|LL_ADC_CHANNEL_VREFINT); | |
| 255 | ||
| 256 | LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(ADC1), LL_ADC_PATH_INTERNAL_TEMPSENSOR|LL_ADC_PATH_INTERNAL_VREFINT); | |
| 257 | ||
| 258 | /**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion) | |
| 259 | */ | |
| 260 | ADC_InitStruct.Clock = LL_ADC_CLOCK_ASYNC; | |
| 261 | ADC_InitStruct.Resolution = LL_ADC_RESOLUTION_12B; | |
| 262 | ADC_InitStruct.DataAlignment = LL_ADC_DATA_ALIGN_RIGHT; | |
| 263 | ADC_InitStruct.LowPowerMode = LL_ADC_LP_MODE_NONE; | |
| 264 | LL_ADC_Init(ADC1, &ADC_InitStruct); | |
| 265 | ||
| 266 | ADC_REG_InitStruct.TriggerSource = LL_ADC_REG_TRIG_SOFTWARE; | |
| 267 | ADC_REG_InitStruct.SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE; | |
| 268 | ADC_REG_InitStruct.ContinuousMode = LL_ADC_REG_CONV_SINGLE; | |
| 269 | ADC_REG_InitStruct.DMATransfer = LL_ADC_REG_DMA_TRANSFER_LIMITED; | |
| 270 | ADC_REG_InitStruct.Overrun = LL_ADC_REG_OVR_DATA_PRESERVED; | |
| 271 | LL_ADC_REG_Init(ADC1, &ADC_REG_InitStruct); | |
| 272 | ||
| 273 | LL_ADC_REG_SetSequencerScanDirection(ADC1, LL_ADC_REG_SEQ_SCAN_DIR_FORWARD); | |
| 274 | ||
| 275 | LL_ADC_SetSamplingTimeCommonChannels(ADC1, LL_ADC_SAMPLINGTIME_28CYCLES_5); | |
| 276 | ||
| 277 | LL_ADC_EnableIT_EOC(ADC1); | |
| 278 | ||
| 279 | LL_ADC_DisableIT_EOS(ADC1); | |
| 280 | ||
| 281 | LL_ADC_StartCalibration(ADC1); | |
| 282 | ||
| 283 | // LL_ADC_EnableInternalRegulator(ADC1); | |
| 284 | ||
| 285 | // ADC_TempSensorCmd(ENABLE);//????????? | |
| 286 | // ADC_VrefintCmd(ENABLE); //???????? | |
| 287 | ||
| 288 | ||
| 289 | //ADC_TempSensorCmd(ENABLE);// | |
| 290 | //ADC_ChannelConfig(); | |
| 291 | //ADC_VrefintCmd(ENABLE); // | |
| 292 | ||
| 293 | while( LL_ADC_IsCalibrationOnGoing(ADC1)); | |
| 294 | LL_ADC_Enable(ADC1); | |
| 295 | /* | |
| 296 | LL_ADC_REG_SetDMATransfer(ADC1,LL_ADC_REG_DMA_TRANSFER_UNLIMITED); | |
| 297 | LL_ADC_REG_StartConversion(ADC1); | |
| 298 | */ | |
| 299 | } | |
| 300 | ||
| 301 | /* SPI1 init function */ | |
| 302 | void MX_SPI1_Init(void) | |
| 303 | { | |
| 304 | ||
| 305 | LL_SPI_InitTypeDef SPI_InitStruct = {0}; | |
| 306 | ||
| 307 | LL_GPIO_InitTypeDef GPIO_InitStruct = {0}; | |
| 308 | ||
| 309 | /* Peripheral clock enable */ | |
| 310 | LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_SPI1); | |
| 311 | ||
| 312 | /**SPI1 GPIO Configuration | |
| 313 | PA5 ------> SPI1_SCK | |
| 314 | PA6 ------> SPI1_MISO | |
| 315 | PA7 ------> SPI1_MOSI | |
| 316 | */ | |
| 317 | // GPIO_InitStruct.Pin = LL_GPIO_PIN_5; | |
| 318 | // GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; | |
| 319 | // GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 320 | // GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; | |
| 321 | // GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 322 | // GPIO_InitStruct.Alternate = LL_GPIO_AF_0; | |
| 323 | // LL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 324 | ||
| 325 | // GPIO_InitStruct.Pin = LL_GPIO_PIN_6; | |
| 326 | // GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; | |
| 327 | // GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 328 | // GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; | |
| 329 | // GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 330 | // GPIO_InitStruct.Alternate = LL_GPIO_AF_0; | |
| 331 | // LL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 332 | ||
| 333 | // GPIO_InitStruct.Pin = LL_GPIO_PIN_7; | |
| 334 | // GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; | |
| 335 | // GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 336 | // GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; | |
| 337 | // GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 338 | // GPIO_InitStruct.Alternate = LL_GPIO_AF_0; | |
| 339 | // LL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 340 | ||
| 341 | LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB); | |
| 342 | /**SPI1 GPIO Configuration | |
| 343 | PB3 ------> SPI1_SCK | |
| 344 | PB4 ------> SPI1_MISO | |
| 345 | PB5 ------> SPI1_MOSI | |
| 346 | */ | |
| 347 | GPIO_InitStruct.Pin = LL_GPIO_PIN_3; | |
| 348 | GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; | |
| 349 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 350 | GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; | |
| 351 | GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 352 | GPIO_InitStruct.Alternate = LL_GPIO_AF_0; | |
| 353 | LL_GPIO_Init(GPIOB, &GPIO_InitStruct); | |
| 354 | ||
| 355 | GPIO_InitStruct.Pin = LL_GPIO_PIN_4; | |
| 356 | GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; | |
| 357 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 358 | GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; | |
| 359 | GPIO_InitStruct.Pull = LL_GPIO_PULL_UP; | |
| 360 | GPIO_InitStruct.Alternate = LL_GPIO_AF_0; | |
| 361 | LL_GPIO_Init(GPIOB, &GPIO_InitStruct); | |
| 362 | ||
| 363 | GPIO_InitStruct.Pin = LL_GPIO_PIN_5; | |
| 364 | GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; | |
| 365 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 366 | GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; | |
| 367 | GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 368 | GPIO_InitStruct.Alternate = LL_GPIO_AF_0; | |
| 369 | LL_GPIO_Init(GPIOB, &GPIO_InitStruct); | |
| 370 | ||
| 371 | /* SPI1 interrupt Init */ | |
| 372 | NVIC_SetPriority(SPI1_IRQn, 0); | |
| 373 | // NVIC_EnableIRQ(SPI1_IRQn); | |
| 374 | /* USER CODE BEGIN SPI1_Init 1 */ | |
| 375 | ||
| 376 | #if (BOARD_TYPE == 13) | |
| 377 | ||
| 378 | NVIC_EnableIRQ(SPI1_IRQn); | |
| 379 | SPI_InitStruct.TransferDirection = LL_SPI_FULL_DUPLEX; | |
| 380 | SPI_InitStruct.Mode = LL_SPI_MODE_MASTER; | |
| 381 | SPI_InitStruct.DataWidth = LL_SPI_DATAWIDTH_8BIT; | |
| 382 | SPI_InitStruct.ClockPolarity = LL_SPI_POLARITY_HIGH; //LL_SPI_POLARITY_LOW; | |
| 383 | SPI_InitStruct.ClockPhase = LL_SPI_PHASE_2EDGE ; //LL_SPI_PHASE_1EDGE; | |
| 384 | SPI_InitStruct.NSS = LL_SPI_NSS_SOFT; | |
| 385 | SPI_InitStruct.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV2; | |
| 386 | SPI_InitStruct.BitOrder = LL_SPI_MSB_FIRST; | |
| 387 | SPI_InitStruct.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE; | |
| 388 | SPI_InitStruct.CRCPoly = 7; | |
| 389 | LL_SPI_Init(SPI1, &SPI_InitStruct); | |
| 390 | ||
| 391 | LL_SPI_SetStandard(SPI1, LL_SPI_PROTOCOL_MOTOROLA); | |
| 392 | ||
| 393 | LL_SPI_SetRxFIFOThreshold(SPI1,LL_SPI_RX_FIFO_TH_QUARTER); | |
| 394 | // LL_SPI_EnableNSSPulseMgt(SPI1); | |
| 395 | ||
| 396 | #elif (BOARD_TYPE == 14) | |
| 397 | ||
| 398 | NVIC_EnableIRQ(SPI1_IRQn); | |
| 399 | SPI_InitStruct.TransferDirection = LL_SPI_FULL_DUPLEX; | |
| 400 | SPI_InitStruct.Mode = LL_SPI_MODE_SLAVE; | |
| 401 | SPI_InitStruct.DataWidth = LL_SPI_DATAWIDTH_8BIT; | |
| 402 | SPI_InitStruct.ClockPolarity = LL_SPI_POLARITY_LOW; //LL_SPI_POLARITY_LOW; | |
| 403 | SPI_InitStruct.ClockPhase = LL_SPI_PHASE_2EDGE ; //LL_SPI_PHASE_1EDGE; | |
| 404 | SPI_InitStruct.NSS = LL_SPI_NSS_SOFT; | |
| 405 | SPI_InitStruct.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV4; | |
| 406 | SPI_InitStruct.BitOrder = LL_SPI_LSB_FIRST; | |
| 407 | SPI_InitStruct.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE; | |
| 408 | SPI_InitStruct.CRCPoly = 7; | |
| 409 | LL_SPI_Init(SPI1, &SPI_InitStruct); | |
| 410 | ||
| 411 | LL_SPI_SetStandard(SPI1, LL_SPI_PROTOCOL_MOTOROLA); | |
| 412 | LL_SPI_DisableNSSPulseMgt(SPI1); | |
| 413 | LL_SPI_SetRxFIFOThreshold(SPI1,LL_SPI_RX_FIFO_TH_QUARTER); | |
| 414 | // LL_SPI_EnableNSSPulseMgt(SPI1); | |
| 415 | ||
| 416 | #elif (BOARD_TYPE == 15 || BOARD_TYPE == 16) | |
| 417 | ||
| 418 | SPI_InitStruct.TransferDirection = LL_SPI_FULL_DUPLEX; | |
| 419 | SPI_InitStruct.Mode = LL_SPI_MODE_MASTER; | |
| 420 | SPI_InitStruct.DataWidth = LL_SPI_DATAWIDTH_8BIT; | |
| 421 | SPI_InitStruct.ClockPolarity = LL_SPI_POLARITY_LOW; | |
| 422 | SPI_InitStruct.ClockPhase = LL_SPI_PHASE_1EDGE; | |
| 423 | SPI_InitStruct.NSS = LL_SPI_NSS_SOFT; | |
| 424 | SPI_InitStruct.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV4; | |
| 425 | SPI_InitStruct.BitOrder = LL_SPI_MSB_FIRST; | |
| 426 | SPI_InitStruct.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE; | |
| 427 | SPI_InitStruct.CRCPoly = 7; | |
| 428 | LL_SPI_Init(SPI1, &SPI_InitStruct); | |
| 429 | ||
| 430 | LL_SPI_SetStandard(SPI1, LL_SPI_PROTOCOL_MOTOROLA); | |
| 431 | ||
| 432 | LL_SPI_SetRxFIFOThreshold(SPI1,LL_SPI_RX_FIFO_TH_QUARTER); | |
| 433 | // LL_SPI_EnableNSSPulseMgt(SPI1); | |
| 434 | ||
| 435 | #else | |
| 436 | ||
| 437 | /* USER CODE END SPI1_Init 1 */ | |
| 438 | ||
| 439 | /* SPI1 parameter configuration*/ | |
| 440 | SPI_InitStruct.TransferDirection = LL_SPI_FULL_DUPLEX; | |
| 441 | SPI_InitStruct.Mode = LL_SPI_MODE_MASTER; | |
| 442 | SPI_InitStruct.DataWidth = LL_SPI_DATAWIDTH_8BIT; | |
| 443 | SPI_InitStruct.ClockPolarity = LL_SPI_POLARITY_LOW; | |
| 444 | SPI_InitStruct.ClockPhase = LL_SPI_PHASE_1EDGE; | |
| 445 | SPI_InitStruct.NSS = LL_SPI_NSS_SOFT; | |
| 446 | SPI_InitStruct.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV4; | |
| 447 | SPI_InitStruct.BitOrder = LL_SPI_MSB_FIRST; | |
| 448 | SPI_InitStruct.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE; | |
| 449 | SPI_InitStruct.CRCPoly = 7; | |
| 450 | LL_SPI_Init(SPI1, &SPI_InitStruct); | |
| 451 | ||
| 452 | LL_SPI_SetStandard(SPI1, LL_SPI_PROTOCOL_MOTOROLA); | |
| 453 | ||
| 454 | LL_SPI_SetRxFIFOThreshold(SPI1,LL_SPI_RX_FIFO_TH_QUARTER); | |
| 455 | // LL_SPI_EnableNSSPulseMgt(SPI1); | |
| 456 | ||
| 457 | /* USER CODE BEGIN SPI1_Init 2 */ | |
| 458 | ||
| 459 | #endif | |
| 460 | ||
| 461 | LL_SPI_Enable(SPI1); | |
| 462 | /* USER CODE END SPI1_Init 2 */ | |
| 463 | } | |
| 464 | ||
| 465 | /* SPI2 init function */ | |
| 466 | void MX_SPI2_Init(void) | |
| 467 | { | |
| 468 | ||
| 469 | LL_SPI_InitTypeDef SPI_InitStruct = {0}; | |
| 470 | ||
| 471 | LL_GPIO_InitTypeDef GPIO_InitStruct = {0}; | |
| 472 | ||
| 473 | /* Peripheral clock enable */ | |
| 474 | LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_SPI2); | |
| 475 | ||
| 476 | LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB); | |
| 477 | /**SPI2 GPIO Configuration | |
| 478 | PB13 ------> SPI2_SCK | |
| 479 | PB14 ------> SPI2_MISO | |
| 480 | PB15 ------> SPI2_MOSI | |
| 481 | */ | |
| 482 | GPIO_InitStruct.Pin = LL_GPIO_PIN_13; | |
| 483 | GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; | |
| 484 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 485 | GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; | |
| 486 | GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 487 | GPIO_InitStruct.Alternate = LL_GPIO_AF_0; | |
| 488 | LL_GPIO_Init(GPIOB, &GPIO_InitStruct); | |
| 489 | ||
| 490 | GPIO_InitStruct.Pin = LL_GPIO_PIN_14; | |
| 491 | GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; | |
| 492 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 493 | GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; | |
| 494 | GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 495 | GPIO_InitStruct.Alternate = LL_GPIO_AF_0; | |
| 496 | LL_GPIO_Init(GPIOB, &GPIO_InitStruct); | |
| 497 | ||
| 498 | GPIO_InitStruct.Pin = LL_GPIO_PIN_15; | |
| 499 | GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; | |
| 500 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 501 | GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; | |
| 502 | GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 503 | GPIO_InitStruct.Alternate = LL_GPIO_AF_0; | |
| 504 | LL_GPIO_Init(GPIOB, &GPIO_InitStruct); | |
| 505 | ||
| 506 | /* SPI2 interrupt Init */ | |
| 507 | //NVIC_SetPriority(SPI2_IRQn, 0); | |
| 508 | //NVIC_EnableIRQ(SPI2_IRQn); | |
| 509 | /* USER CODE BEGIN SPI2_Init 1 */ | |
| 510 | ||
| 511 | /* USER CODE END SPI2_Init 1 */ | |
| 512 | ||
| 513 | /* SPI2 parameter configuration*/ | |
| 514 | SPI_InitStruct.TransferDirection = LL_SPI_FULL_DUPLEX; | |
| 515 | SPI_InitStruct.Mode = LL_SPI_MODE_MASTER; | |
| 516 | SPI_InitStruct.DataWidth = LL_SPI_DATAWIDTH_8BIT; | |
| 517 | SPI_InitStruct.ClockPolarity = LL_SPI_POLARITY_LOW; //LL_SPI_POLARITY_HIGH;//LL_SPI_POLARITY_LOW; | |
| 518 | SPI_InitStruct.ClockPhase = LL_SPI_PHASE_1EDGE; //LL_SPI_PHASE_1EDGE; | |
| 519 | SPI_InitStruct.NSS = LL_SPI_NSS_SOFT; | |
| 520 | SPI_InitStruct.BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV2; | |
| 521 | SPI_InitStruct.BitOrder = LL_SPI_MSB_FIRST; | |
| 522 | SPI_InitStruct.CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE; | |
| 523 | SPI_InitStruct.CRCPoly = 7; | |
| 524 | LL_SPI_Init(SPI2, &SPI_InitStruct); | |
| 525 | LL_SPI_SetStandard(SPI2, LL_SPI_PROTOCOL_MOTOROLA); | |
| 526 | LL_SPI_EnableNSSPulseMgt(SPI2); | |
| 527 | /* USER CODE BEGIN SP21_Init 2 */ | |
| 528 | LL_SPI_Enable(SPI2); | |
| 529 | /* USER CODE END SPI2_Init 2 */ | |
| 530 | } | |
| 531 | ||
| 532 | ||
| 533 | /* USART1 init function */ | |
| 534 | void MX_USART1_UART_Init(void) | |
| 535 | { | |
| 536 | ||
| 537 | LL_USART_InitTypeDef USART_InitStruct; | |
| 538 | ||
| 539 | LL_GPIO_InitTypeDef GPIO_InitStruct; | |
| 540 | ||
| 541 | /* Peripheral clock enable */ | |
| 542 | LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_USART1); | |
| 543 | ||
| 544 | /**USART1 GPIO Configuration | |
| 545 | // PA1 ------> USART1_DE | |
| 546 | PA9 ------> USART1_TX | |
| 547 | PA10 ------> USART1_RX | |
| 548 | */ | |
| 549 | GPIO_InitStruct.Pin = LL_GPIO_PIN_9|LL_GPIO_PIN_10; | |
| 550 | GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; | |
| 551 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 552 | GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; | |
| 553 | GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 554 | GPIO_InitStruct.Alternate = LL_GPIO_AF_1; | |
| 555 | LL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 556 | ||
| 557 | /* USART1 DMA Init */ | |
| 558 | ||
| 559 | /* USART1_TX Init */ | |
| 560 | LL_DMA_SetDataTransferDirection(DMA1, LL_DMA_CHANNEL_2, LL_DMA_DIRECTION_MEMORY_TO_PERIPH); | |
| 561 | LL_DMA_SetChannelPriorityLevel(DMA1, LL_DMA_CHANNEL_2, LL_DMA_PRIORITY_LOW); | |
| 562 | LL_DMA_SetMode(DMA1, LL_DMA_CHANNEL_2, LL_DMA_MODE_NORMAL); | |
| 563 | LL_DMA_SetPeriphIncMode(DMA1, LL_DMA_CHANNEL_2, LL_DMA_PERIPH_NOINCREMENT); | |
| 564 | LL_DMA_SetMemoryIncMode(DMA1, LL_DMA_CHANNEL_2, LL_DMA_MEMORY_INCREMENT); | |
| 565 | LL_DMA_SetPeriphSize(DMA1, LL_DMA_CHANNEL_2, LL_DMA_PDATAALIGN_BYTE); | |
| 566 | LL_DMA_SetMemorySize(DMA1, LL_DMA_CHANNEL_2, LL_DMA_MDATAALIGN_BYTE); | |
| 567 | ||
| 568 | /* USART1_RX Init */ | |
| 569 | LL_DMA_SetDataTransferDirection(DMA1, LL_DMA_CHANNEL_3, LL_DMA_DIRECTION_PERIPH_TO_MEMORY); | |
| 570 | LL_DMA_SetChannelPriorityLevel(DMA1, LL_DMA_CHANNEL_3, LL_DMA_PRIORITY_LOW); | |
| 571 | LL_DMA_SetMode(DMA1, LL_DMA_CHANNEL_3, LL_DMA_MODE_NORMAL); | |
| 572 | LL_DMA_SetPeriphIncMode(DMA1, LL_DMA_CHANNEL_3, LL_DMA_PERIPH_NOINCREMENT); | |
| 573 | LL_DMA_SetMemoryIncMode(DMA1, LL_DMA_CHANNEL_3, LL_DMA_MEMORY_INCREMENT); | |
| 574 | LL_DMA_SetPeriphSize(DMA1, LL_DMA_CHANNEL_3, LL_DMA_PDATAALIGN_BYTE); | |
| 575 | LL_DMA_SetMemorySize(DMA1, LL_DMA_CHANNEL_3, LL_DMA_MDATAALIGN_BYTE); | |
| 576 | ||
| 577 | /* USART1 interrupt Init */ | |
| 578 | NVIC_SetPriority(USART1_IRQn, 0); | |
| 579 | NVIC_EnableIRQ(USART1_IRQn); | |
| 580 | ||
| 581 | USART_InitStruct.BaudRate = Uart1Baud; | |
| 582 | USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B; | |
| 583 | USART_InitStruct.StopBits = LL_USART_STOPBITS_1; | |
| 584 | USART_InitStruct.Parity = LL_USART_PARITY_NONE; | |
| 585 | USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX; | |
| 586 | USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE; | |
| 587 | USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_16; | |
| 588 | LL_USART_Init(USART1, &USART_InitStruct); | |
| 589 | // LL_USART_EnableDEMode(USART1); | |
| 590 | // LL_USART_SetDESignalPolarity(USART1, LL_USART_DE_POLARITY_LOW); | |
| 591 | // LL_USART_SetDEAssertionTime(USART1, 1); | |
| 592 | // LL_USART_SetDEDeassertionTime(USART1, 1); | |
| 593 | // LL_USART_EnableOneBitSamp(USART1); | |
| 594 | LL_USART_EnableAutoBaudRate(USART1); | |
| 595 | LL_USART_SetAutoBaudRateMode(USART1, LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE); | |
| 596 | LL_USART_DisableOverrunDetect(USART1); | |
| 597 | LL_USART_ConfigAsyncMode(USART1); | |
| 598 | LL_USART_Enable(USART1); | |
| 599 | } | |
| 600 | ||
| 601 | ||
| 602 | /* USART2 init function */ | |
| 603 | void MX_USART2_UART_Init(void) | |
| 604 | { | |
| 605 | ||
| 606 | LL_USART_InitTypeDef USART_InitStruct = {0}; | |
| 607 | LL_GPIO_InitTypeDef GPIO_InitStruct = {0}; | |
| 608 | ||
| 609 | /* Peripheral clock enable */ | |
| 610 | LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART2); | |
| 611 | LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA); | |
| 612 | ||
| 613 | /**USART2 GPIO Configuration | |
| 614 | PA1 ------> USART2_DE | |
| 615 | PA2 ------> USART2_TX | |
| 616 | PA3 ------> USART2_RX | |
| 617 | */ | |
| 618 | ||
| 619 | GPIO_InitStruct.Pin = LL_GPIO_PIN_1|LL_GPIO_PIN_2|LL_GPIO_PIN_3; | |
| 620 | GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE; | |
| 621 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 622 | GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_OPENDRAIN; | |
| 623 | GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 624 | GPIO_InitStruct.Alternate = LL_GPIO_AF_1; | |
| 625 | LL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 626 | ||
| 627 | #if (USART2_USE_HARDWARE_DE == 1) | |
| 628 | ||
| 629 | #else | |
| 630 | GPIO_InitStruct.Pin = LL_GPIO_PIN_1; | |
| 631 | GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT; | |
| 632 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 633 | GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_OPENDRAIN; | |
| 634 | GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 635 | LL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 636 | ||
| 637 | #endif | |
| 638 | ||
| 639 | /* USART2 DMA Init */ | |
| 640 | ||
| 641 | /* USART2_TX Init */ | |
| 642 | LL_DMA_SetDataTransferDirection(DMA1, LL_DMA_CHANNEL_4, LL_DMA_DIRECTION_MEMORY_TO_PERIPH); | |
| 643 | LL_DMA_SetChannelPriorityLevel(DMA1, LL_DMA_CHANNEL_4, LL_DMA_PRIORITY_LOW); | |
| 644 | LL_DMA_SetMode(DMA1, LL_DMA_CHANNEL_4, LL_DMA_MODE_NORMAL); | |
| 645 | LL_DMA_SetPeriphIncMode(DMA1, LL_DMA_CHANNEL_4, LL_DMA_PERIPH_NOINCREMENT); | |
| 646 | LL_DMA_SetMemoryIncMode(DMA1, LL_DMA_CHANNEL_4, LL_DMA_MEMORY_INCREMENT); | |
| 647 | LL_DMA_SetPeriphSize(DMA1, LL_DMA_CHANNEL_4, LL_DMA_PDATAALIGN_BYTE); | |
| 648 | LL_DMA_SetMemorySize(DMA1, LL_DMA_CHANNEL_4, LL_DMA_MDATAALIGN_BYTE); | |
| 649 | ||
| 650 | /* USART2_RX Init */ | |
| 651 | LL_DMA_SetDataTransferDirection(DMA1, LL_DMA_CHANNEL_5, LL_DMA_DIRECTION_PERIPH_TO_MEMORY); | |
| 652 | LL_DMA_SetChannelPriorityLevel(DMA1, LL_DMA_CHANNEL_5, LL_DMA_PRIORITY_LOW); | |
| 653 | LL_DMA_SetMode(DMA1, LL_DMA_CHANNEL_5, LL_DMA_MODE_NORMAL); | |
| 654 | LL_DMA_SetPeriphIncMode(DMA1, LL_DMA_CHANNEL_5, LL_DMA_PERIPH_NOINCREMENT); | |
| 655 | LL_DMA_SetMemoryIncMode(DMA1, LL_DMA_CHANNEL_5, LL_DMA_MEMORY_INCREMENT); | |
| 656 | LL_DMA_SetPeriphSize(DMA1, LL_DMA_CHANNEL_5, LL_DMA_PDATAALIGN_BYTE); | |
| 657 | LL_DMA_SetMemorySize(DMA1, LL_DMA_CHANNEL_5, LL_DMA_MDATAALIGN_BYTE); | |
| 658 | ||
| 659 | /* USART2 interrupt Init */ | |
| 660 | NVIC_SetPriority(USART2_IRQn, 0); | |
| 661 | NVIC_EnableIRQ(USART2_IRQn); | |
| 662 | ||
| 663 | NVIC_SetPriority(PendSV_IRQn, 255); | |
| 664 | NVIC_EnableIRQ(PendSV_IRQn); | |
| 665 | // NVIC_SetPendingIRQ(PendSV_IRQn); | |
| 666 | ||
| 667 | USART_InitStruct.BaudRate = Uart2Baud; | |
| 668 | USART_InitStruct.DataWidth = LL_USART_DATAWIDTH_8B; | |
| 669 | USART_InitStruct.StopBits = LL_USART_STOPBITS_1; | |
| 670 | USART_InitStruct.Parity = LL_USART_PARITY_NONE; | |
| 671 | USART_InitStruct.TransferDirection = LL_USART_DIRECTION_TX_RX; | |
| 672 | USART_InitStruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE; | |
| 673 | USART_InitStruct.OverSampling = LL_USART_OVERSAMPLING_8; | |
| 674 | LL_USART_Init(USART2, &USART_InitStruct); | |
| 675 | ||
| 676 | #if (USART2_USE_HARDWARE_DE == 1) | |
| 677 | ||
| 678 | LL_USART_EnableDEMode(USART2); | |
| 679 | LL_USART_SetDESignalPolarity(USART2, LL_USART_DE_POLARITY_LOW); | |
| 680 | // LL_USART_SetDESignalPolarity(USART2, LL_USART_DE_POLARITY_HIGH); | |
| 681 | LL_USART_SetDEAssertionTime(USART2, 31); | |
| 682 | LL_USART_SetDEDeassertionTime(USART2, 31); | |
| 683 | #else | |
| 684 | ||
| 685 | #endif | |
| 686 | ||
| 687 | // LL_USART_EnableOneBitSamp(USART2); | |
| 688 | // LL_USART_EnableAutoBaudRate(USART2); | |
| 689 | // LL_USART_SetAutoBaudRateMode(USART2, LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE); | |
| 690 | LL_USART_DisableOverrunDetect(USART2); | |
| 691 | LL_USART_ConfigAsyncMode(USART2); | |
| 692 | LL_USART_Enable(USART2); | |
| 693 | } | |
| 694 | ||
| 695 | /** | |
| 696 | * Enable DMA controller clock | |
| 697 | */ | |
| 698 | void MX_DMA_Init(void) | |
| 699 | { | |
| 700 | /* Init with LL driver */ | |
| 701 | /* DMA controller clock enable */ | |
| 702 | LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1); | |
| 703 | ||
| 704 | /* DMA interrupt init */ | |
| 705 | /* DMA1_Channel2_3_IRQn interrupt configuration */ | |
| 706 | NVIC_SetPriority(DMA1_Channel2_3_IRQn, 0); | |
| 707 | NVIC_EnableIRQ(DMA1_Channel2_3_IRQn); | |
| 708 | NVIC_SetPriority(DMA1_Channel4_5_IRQn, 0); | |
| 709 | NVIC_EnableIRQ(DMA1_Channel4_5_IRQn); | |
| 710 | } | |
| 711 | ||
| 712 | /** Configure pins as | |
| 713 | * Analog | |
| 714 | * Input | |
| 715 | * Output | |
| 716 | * EVENT_OUT | |
| 717 | * EXTI | |
| 718 | */ | |
| 719 | void MX_GPIO_Init(void) | |
| 720 | { | |
| 721 | ||
| 722 | LL_GPIO_InitTypeDef GPIO_InitStruct; | |
| 723 | ||
| 724 | /* GPIO Ports Clock Enable */ | |
| 725 | LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA); | |
| 726 | LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB); | |
| 727 | LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOC); | |
| 728 | LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOF); | |
| 729 | /**/ | |
| 730 | ||
| 731 | ||
| 732 | /**/ | |
| 733 | GPIO_InitStruct.Pin = LL_GPIO_PIN_6 ; | |
| 734 | GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT; | |
| 735 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 736 | GPIO_InitStruct.Pull = LL_GPIO_PULL_UP; | |
| 737 | LL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 738 | ||
| 739 | GPIO_InitStruct.Pin = LL_GPIO_PIN_7 ; | |
| 740 | GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT; | |
| 741 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 742 | GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 743 | LL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 744 | ||
| 745 | GPIO_InitStruct.Pin = LL_GPIO_PIN_0 |LL_GPIO_PIN_1 ; | |
| 746 | GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT; | |
| 747 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 748 | GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 749 | LL_GPIO_Init(GPIOB, &GPIO_InitStruct); | |
| 750 | ||
| 751 | ||
| 752 | GPIO_InitStruct.Pin = LL_GPIO_PIN_4|LL_GPIO_PIN_5|LL_GPIO_PIN_8|LL_GPIO_PIN_11; | |
| 753 | GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT; | |
| 754 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 755 | GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; | |
| 756 | GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 757 | LL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 758 | LL_GPIO_SetOutputPin(GPIOA, LL_GPIO_PIN_8); | |
| 759 | ||
| 760 | GPIO_InitStruct.Pin = LL_GPIO_PIN_9|LL_GPIO_PIN_10; | |
| 761 | GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT; | |
| 762 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 763 | GPIO_InitStruct.Pull = LL_GPIO_PULL_UP; | |
| 764 | LL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 765 | ||
| 766 | ||
| 767 | GPIO_InitStruct.Pin = LL_GPIO_PIN_2|LL_GPIO_PIN_10; | |
| 768 | GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT; | |
| 769 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 770 | GPIO_InitStruct.Pull = LL_GPIO_PULL_UP; | |
| 771 | LL_GPIO_Init(GPIOB, &GPIO_InitStruct); | |
| 772 | ||
| 773 | if (GetBoardType()==2) | |
| 774 | { | |
| 775 | GPIO_InitStruct.Pin = LL_GPIO_PIN_3|LL_GPIO_PIN_4|LL_GPIO_PIN_5|LL_GPIO_PIN_6|LL_GPIO_PIN_7| | |
| 776 | LL_GPIO_PIN_12|LL_GPIO_PIN_13|LL_GPIO_PIN_15; | |
| 777 | ||
| 778 | } | |
| 779 | else if (GetBoardType()==9 || GetBoardType()==10 || GetBoardType()==15 || BOARD_TYPE == 16 ) | |
| 780 | { | |
| 781 | GPIO_InitStruct.Pin = LL_GPIO_PIN_3|LL_GPIO_PIN_5|LL_GPIO_PIN_6|LL_GPIO_PIN_7| | |
| 782 | LL_GPIO_PIN_11|LL_GPIO_PIN_1|LL_GPIO_PIN_2|LL_GPIO_PIN_10| | |
| 783 | LL_GPIO_PIN_12|LL_GPIO_PIN_13|LL_GPIO_PIN_15; | |
| 784 | } | |
| 785 | else if ( GetBoardType() == 11 ) | |
| 786 | { | |
| 787 | GPIO_InitStruct.Pin = LL_GPIO_PIN_3|LL_GPIO_PIN_4|LL_GPIO_PIN_5|LL_GPIO_PIN_6|LL_GPIO_PIN_7| | |
| 788 | LL_GPIO_PIN_2|LL_GPIO_PIN_10|LL_GPIO_PIN_12|LL_GPIO_PIN_13|LL_GPIO_PIN_15; | |
| 789 | } else if (BOARD_TYPE == 14) | |
| 790 | { | |
| 791 | GPIO_InitStruct.Pin = LL_GPIO_PIN_6|LL_GPIO_PIN_7| | |
| 792 | LL_GPIO_PIN_10|LL_GPIO_PIN_11|LL_GPIO_PIN_12|LL_GPIO_PIN_13|LL_GPIO_PIN_14|LL_GPIO_PIN_15; | |
| 793 | } else | |
| 794 | { | |
| 795 | GPIO_InitStruct.Pin = LL_GPIO_PIN_3|LL_GPIO_PIN_4|LL_GPIO_PIN_5|LL_GPIO_PIN_6|LL_GPIO_PIN_7| | |
| 796 | LL_GPIO_PIN_0|LL_GPIO_PIN_1|LL_GPIO_PIN_2|LL_GPIO_PIN_10| | |
| 797 | LL_GPIO_PIN_12|LL_GPIO_PIN_13|LL_GPIO_PIN_15; | |
| 798 | } | |
| 799 | ||
| 800 | GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT; | |
| 801 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 802 | GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; | |
| 803 | GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 804 | LL_GPIO_Init(GPIOB, &GPIO_InitStruct); | |
| 805 | ||
| 806 | GPIO_InitStruct.Pin = LL_GPIO_PIN_13|LL_GPIO_PIN_14|LL_GPIO_PIN_15; | |
| 807 | GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT; | |
| 808 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_LOW; | |
| 809 | GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL; | |
| 810 | GPIO_InitStruct.Pull = LL_GPIO_PULL_NO; | |
| 811 | LL_GPIO_Init(GPIOC, &GPIO_InitStruct); | |
| 812 | ||
| 813 | // RCC_APB2PeriphClockCmd( RCC_APB2Periph_GPIOC|RCC_APB2Periph_AFIO,ENABLE ); | |
| 814 | // PWR_BackupAccessCmd( ENABLE );/* ????RTC??????*/ | |
| 815 | // RCC_LSEConfig( RCC_LSE_OFF ); /* ????????,PC14+PC15??????IO*/ | |
| 816 | // BKP_TamperPinCmd(DISABLE); /* ????????,PC13??????IO*/ | |
| 817 | ||
| 818 | #if (BORAD_TYPE == 13) | |
| 819 | ||
| 820 | GPIO_InitStruct.Pin = LL_GPIO_PIN_15 ; | |
| 821 | GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT; | |
| 822 | GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH; | |
| 823 | GPIO_InitStruct.Pull = LL_GPIO_OUTPUT_PUSHPULL; | |
| 824 | LL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 825 | ||
| 826 | #endif | |
| 827 | ||
| 828 | } | |
