| 提交 | 用户 | age | ||
| 483170 | 1 | /** |
| Q | 2 | ****************************************************************************** |
| 3 | * @file stm32f0xx_hal_usart.h | |
| 4 | * @author MCD Application Team | |
| 5 | * @brief Header file of USART HAL module. | |
| 6 | ****************************************************************************** | |
| 7 | * @attention | |
| 8 | * | |
| 9 | * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
| 10 | * | |
| 11 | * Redistribution and use in source and binary forms, with or without modification, | |
| 12 | * are permitted provided that the following conditions are met: | |
| 13 | * 1. Redistributions of source code must retain the above copyright notice, | |
| 14 | * this list of conditions and the following disclaimer. | |
| 15 | * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| 16 | * this list of conditions and the following disclaimer in the documentation | |
| 17 | * and/or other materials provided with the distribution. | |
| 18 | * 3. Neither the name of STMicroelectronics nor the names of its contributors | |
| 19 | * may be used to endorse or promote products derived from this software | |
| 20 | * without specific prior written permission. | |
| 21 | * | |
| 22 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| 23 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| 24 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| 25 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
| 26 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| 27 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
| 28 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
| 29 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
| 30 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| 31 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| 32 | * | |
| 33 | ****************************************************************************** | |
| 34 | */ | |
| 35 | ||
| 36 | /* Define to prevent recursive inclusion -------------------------------------*/ | |
| 37 | #ifndef __STM32F0xx_HAL_USART_H | |
| 38 | #define __STM32F0xx_HAL_USART_H | |
| 39 | ||
| 40 | #ifdef __cplusplus | |
| 41 | extern "C" { | |
| 42 | #endif | |
| 43 | ||
| 44 | /* Includes ------------------------------------------------------------------*/ | |
| 45 | #include "stm32f0xx_hal_def.h" | |
| 46 | ||
| 47 | /** @addtogroup STM32F0xx_HAL_Driver | |
| 48 | * @{ | |
| 49 | */ | |
| 50 | ||
| 51 | /** @addtogroup USART | |
| 52 | * @{ | |
| 53 | */ | |
| 54 | ||
| 55 | /* Exported types ------------------------------------------------------------*/ | |
| 56 | /** @defgroup USART_Exported_Types USART Exported Types | |
| 57 | * @{ | |
| 58 | */ | |
| 59 | ||
| 60 | /** | |
| 61 | * @brief USART Init Structure definition | |
| 62 | */ | |
| 63 | typedef struct | |
| 64 | { | |
| 65 | uint32_t BaudRate; /*!< This member configures the Usart communication baud rate. | |
| 66 | The baud rate is computed using the following formula: | |
| 67 | Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate))). */ | |
| 68 | ||
| 69 | uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. | |
| 70 | This parameter can be a value of @ref USARTEx_Word_Length. */ | |
| 71 | ||
| 72 | uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. | |
| 73 | This parameter can be a value of @ref USART_Stop_Bits. */ | |
| 74 | ||
| 75 | uint32_t Parity; /*!< Specifies the parity mode. | |
| 76 | This parameter can be a value of @ref USART_Parity | |
| 77 | @note When parity is enabled, the computed parity is inserted | |
| 78 | at the MSB position of the transmitted data (9th bit when | |
| 79 | the word length is set to 9 data bits; 8th bit when the | |
| 80 | word length is set to 8 data bits). */ | |
| 81 | ||
| 82 | uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. | |
| 83 | This parameter can be a value of @ref USART_Mode. */ | |
| 84 | ||
| 85 | uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. | |
| 86 | This parameter can be a value of @ref USART_Clock_Polarity. */ | |
| 87 | ||
| 88 | uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. | |
| 89 | This parameter can be a value of @ref USART_Clock_Phase. */ | |
| 90 | ||
| 91 | uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted | |
| 92 | data bit (MSB) has to be output on the SCLK pin in synchronous mode. | |
| 93 | This parameter can be a value of @ref USART_Last_Bit. */ | |
| 94 | }USART_InitTypeDef; | |
| 95 | ||
| 96 | /** | |
| 97 | * @brief HAL USART State structures definition | |
| 98 | */ | |
| 99 | typedef enum | |
| 100 | { | |
| 101 | HAL_USART_STATE_RESET = 0x00U, /*!< Peripheral is not initialized */ | |
| 102 | HAL_USART_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ | |
| 103 | HAL_USART_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ | |
| 104 | HAL_USART_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */ | |
| 105 | HAL_USART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ | |
| 106 | HAL_USART_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission Reception process is ongoing */ | |
| 107 | HAL_USART_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ | |
| 108 | HAL_USART_STATE_ERROR = 0x04U /*!< Error */ | |
| 109 | }HAL_USART_StateTypeDef; | |
| 110 | ||
| 111 | /** | |
| 112 | * @brief USART clock sources definitions | |
| 113 | */ | |
| 114 | typedef enum | |
| 115 | { | |
| 116 | USART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ | |
| 117 | USART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ | |
| 118 | USART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ | |
| 119 | USART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ | |
| 120 | USART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ | |
| 121 | }USART_ClockSourceTypeDef; | |
| 122 | ||
| 123 | ||
| 124 | /** | |
| 125 | * @brief USART handle Structure definition | |
| 126 | */ | |
| 127 | typedef struct | |
| 128 | { | |
| 129 | USART_TypeDef *Instance; /*!< USART registers base address */ | |
| 130 | ||
| 131 | USART_InitTypeDef Init; /*!< USART communication parameters */ | |
| 132 | ||
| 133 | uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */ | |
| 134 | ||
| 135 | uint16_t TxXferSize; /*!< USART Tx Transfer size */ | |
| 136 | ||
| 137 | __IO uint16_t TxXferCount; /*!< USART Tx Transfer Counter */ | |
| 138 | ||
| 139 | uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */ | |
| 140 | ||
| 141 | uint16_t RxXferSize; /*!< USART Rx Transfer size */ | |
| 142 | ||
| 143 | __IO uint16_t RxXferCount; /*!< USART Rx Transfer Counter */ | |
| 144 | ||
| 145 | uint16_t Mask; /*!< USART Rx RDR register mask */ | |
| 146 | ||
| 147 | DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */ | |
| 148 | ||
| 149 | DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */ | |
| 150 | ||
| 151 | HAL_LockTypeDef Lock; /*!< Locking object */ | |
| 152 | ||
| 153 | __IO HAL_USART_StateTypeDef State; /*!< USART communication state */ | |
| 154 | ||
| 155 | __IO uint32_t ErrorCode; /*!< USART Error code */ | |
| 156 | ||
| 157 | }USART_HandleTypeDef; | |
| 158 | ||
| 159 | /** | |
| 160 | * @} | |
| 161 | */ | |
| 162 | ||
| 163 | /* Exported constants --------------------------------------------------------*/ | |
| 164 | /** @defgroup USART_Exported_Constants USART Exported Constants | |
| 165 | * @{ | |
| 166 | */ | |
| 167 | ||
| 168 | /** @defgroup USART_Error USART Error | |
| 169 | * @{ | |
| 170 | */ | |
| 171 | #define HAL_USART_ERROR_NONE (0x00000000U) /*!< No error */ | |
| 172 | #define HAL_USART_ERROR_PE (0x00000001U) /*!< Parity error */ | |
| 173 | #define HAL_USART_ERROR_NE (0x00000002U) /*!< Noise error */ | |
| 174 | #define HAL_USART_ERROR_FE (0x00000004U) /*!< frame error */ | |
| 175 | #define HAL_USART_ERROR_ORE (0x00000008U) /*!< Overrun error */ | |
| 176 | #define HAL_USART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ | |
| 177 | /** | |
| 178 | * @} | |
| 179 | */ | |
| 180 | ||
| 181 | /** @defgroup USART_Stop_Bits USART Number of Stop Bits | |
| 182 | * @{ | |
| 183 | */ | |
| 184 | #ifdef USART_SMARTCARD_SUPPORT | |
| 185 | #define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) /*!< USART frame with 0.5 stop bit */ | |
| 186 | #define USART_STOPBITS_1 (0x00000000U) /*!< USART frame with 1 stop bit */ | |
| 187 | #define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) /*!< USART frame with 1.5 stop bits */ | |
| 188 | #define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) /*!< USART frame with 2 stop bits */ | |
| 189 | #else | |
| 190 | #define USART_STOPBITS_1 (0x00000000U) /*!< USART frame with 1 stop bit */ | |
| 191 | #define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) /*!< USART frame with 2 stop bits */ | |
| 192 | #endif | |
| 193 | /** | |
| 194 | * @} | |
| 195 | */ | |
| 196 | ||
| 197 | /** @defgroup USART_Parity USART Parity | |
| 198 | * @{ | |
| 199 | */ | |
| 200 | #define USART_PARITY_NONE (0x00000000U) /*!< No parity */ | |
| 201 | #define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) /*!< Even parity */ | |
| 202 | #define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) /*!< Odd parity */ | |
| 203 | /** | |
| 204 | * @} | |
| 205 | */ | |
| 206 | ||
| 207 | /** @defgroup USART_Mode USART Mode | |
| 208 | * @{ | |
| 209 | */ | |
| 210 | #define USART_MODE_RX ((uint32_t)USART_CR1_RE) /*!< RX mode */ | |
| 211 | #define USART_MODE_TX ((uint32_t)USART_CR1_TE) /*!< TX mode */ | |
| 212 | #define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) /*!< RX and TX mode */ | |
| 213 | /** | |
| 214 | * @} | |
| 215 | */ | |
| 216 | ||
| 217 | /** @defgroup USART_Clock USART Clock | |
| 218 | * @{ | |
| 219 | */ | |
| 220 | #define USART_CLOCK_DISABLE (0x00000000U) /*!< USART clock disable */ | |
| 221 | #define USART_CLOCK_ENABLE ((uint32_t)USART_CR2_CLKEN) /*!< USART clock enable */ | |
| 222 | /** | |
| 223 | * @} | |
| 224 | */ | |
| 225 | ||
| 226 | /** @defgroup USART_Clock_Polarity USART Clock Polarity | |
| 227 | * @{ | |
| 228 | */ | |
| 229 | #define USART_POLARITY_LOW (0x00000000U) /*!< USART Clock signal is steady Low */ | |
| 230 | #define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) /*!< USART Clock signal is steady High */ | |
| 231 | /** | |
| 232 | * @} | |
| 233 | */ | |
| 234 | ||
| 235 | /** @defgroup USART_Clock_Phase USART Clock Phase | |
| 236 | * @{ | |
| 237 | */ | |
| 238 | #define USART_PHASE_1EDGE (0x00000000U) /*!< USART frame phase on first clock transition */ | |
| 239 | #define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) /*!< USART frame phase on second clock transition */ | |
| 240 | /** | |
| 241 | * @} | |
| 242 | */ | |
| 243 | ||
| 244 | /** @defgroup USART_Last_Bit USART Last Bit | |
| 245 | * @{ | |
| 246 | */ | |
| 247 | #define USART_LASTBIT_DISABLE (0x00000000U) /*!< USART frame last data bit clock pulse not output to SCLK pin */ | |
| 248 | #define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) /*!< USART frame last data bit clock pulse output to SCLK pin */ | |
| 249 | /** | |
| 250 | * @} | |
| 251 | */ | |
| 252 | ||
| 253 | /** @defgroup USART_Interrupt_definition USART Interrupts Definition | |
| 254 | * Elements values convention: 0000ZZZZ0XXYYYYYb | |
| 255 | * - YYYYY : Interrupt source position in the XX register (5bits) | |
| 256 | * - XX : Interrupt source register (2bits) | |
| 257 | * - 01: CR1 register | |
| 258 | * - 10: CR2 register | |
| 259 | * - 11: CR3 register | |
| 260 | * - ZZZZ : Flag position in the ISR register(4bits) | |
| 261 | * @{ | |
| 262 | */ | |
| 263 | ||
| 264 | #define USART_IT_PE ((uint16_t)0x0028U) /*!< USART parity error interruption */ | |
| 265 | #define USART_IT_TXE ((uint16_t)0x0727U) /*!< USART transmit data register empty interruption */ | |
| 266 | #define USART_IT_TC ((uint16_t)0x0626U) /*!< USART transmission complete interruption */ | |
| 267 | #define USART_IT_RXNE ((uint16_t)0x0525U) /*!< USART read data register not empty interruption */ | |
| 268 | #define USART_IT_IDLE ((uint16_t)0x0424U) /*!< USART idle interruption */ | |
| 269 | #define USART_IT_ERR ((uint16_t)0x0060U) /*!< USART error interruption */ | |
| 270 | #define USART_IT_ORE ((uint16_t)0x0300U) /*!< USART overrun error interruption */ | |
| 271 | #define USART_IT_NE ((uint16_t)0x0200U) /*!< USART noise error interruption */ | |
| 272 | #define USART_IT_FE ((uint16_t)0x0100U) /*!< USART frame error interruption */ | |
| 273 | /** | |
| 274 | * @} | |
| 275 | */ | |
| 276 | ||
| 277 | /** @defgroup USART_IT_CLEAR_Flags USART Interruption Clear Flags | |
| 278 | * @{ | |
| 279 | */ | |
| 280 | #define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ | |
| 281 | #define USART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ | |
| 282 | #define USART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */ | |
| 283 | #define USART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ | |
| 284 | #define USART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ | |
| 285 | #define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ | |
| 286 | #define USART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ | |
| 287 | /** | |
| 288 | * @} | |
| 289 | */ | |
| 290 | ||
| 291 | /** @defgroup USART_Interruption_Mask USART Interruption Flags Mask | |
| 292 | * @{ | |
| 293 | */ | |
| 294 | #define USART_IT_MASK ((uint16_t)0x001FU) /*!< USART interruptions flags mask */ | |
| 295 | /** | |
| 296 | * @} | |
| 297 | */ | |
| 298 | ||
| 299 | /** | |
| 300 | * @} | |
| 301 | */ | |
| 302 | ||
| 303 | /* Exported macros -----------------------------------------------------------*/ | |
| 304 | /** @defgroup USART_Exported_Macros USART Exported Macros | |
| 305 | * @{ | |
| 306 | */ | |
| 307 | ||
| 308 | /** @brief Reset USART handle state. | |
| 309 | * @param __HANDLE__ USART handle. | |
| 310 | * @retval None | |
| 311 | */ | |
| 312 | #define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET) | |
| 313 | ||
| 314 | /** @brief Check whether the specified USART flag is set or not. | |
| 315 | * @param __HANDLE__ specifies the USART Handle | |
| 316 | * @param __FLAG__ specifies the flag to check. | |
| 317 | * This parameter can be one of the following values: | |
| 318 | @if STM32F030x6 | |
| 319 | @elseif STM32F030x8 | |
| 320 | @elseif STM32F030xC | |
| 321 | @elseif STM32F070x6 | |
| 322 | @elseif STM32F070xB | |
| 323 | @else | |
| 324 | * @arg @ref USART_FLAG_REACK Receive enable acknowledge flag | |
| 325 | @endif | |
| 326 | * @arg @ref USART_FLAG_TEACK Transmit enable acknowledge flag | |
| 327 | * @arg @ref USART_FLAG_BUSY Busy flag | |
| 328 | * @arg @ref USART_FLAG_CTS CTS Change flag | |
| 329 | * @arg @ref USART_FLAG_TXE Transmit data register empty flag | |
| 330 | * @arg @ref USART_FLAG_TC Transmission Complete flag | |
| 331 | * @arg @ref USART_FLAG_RXNE Receive data register not empty flag | |
| 332 | * @arg @ref USART_FLAG_IDLE Idle Line detection flag | |
| 333 | * @arg @ref USART_FLAG_ORE OverRun Error flag | |
| 334 | * @arg @ref USART_FLAG_NE Noise Error flag | |
| 335 | * @arg @ref USART_FLAG_FE Framing Error flag | |
| 336 | * @arg @ref USART_FLAG_PE Parity Error flag | |
| 337 | * @retval The new state of __FLAG__ (TRUE or FALSE). | |
| 338 | */ | |
| 339 | #define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) | |
| 340 | ||
| 341 | /** @brief Clear the specified USART pending flag. | |
| 342 | * @param __HANDLE__ specifies the USART Handle. | |
| 343 | * @param __FLAG__ specifies the flag to check. | |
| 344 | * This parameter can be any combination of the following values: | |
| 345 | * @arg @ref USART_CLEAR_PEF | |
| 346 | * @arg @ref USART_CLEAR_FEF | |
| 347 | * @arg @ref USART_CLEAR_NEF | |
| 348 | * @arg @ref USART_CLEAR_OREF | |
| 349 | * @arg @ref USART_CLEAR_IDLEF | |
| 350 | * @arg @ref USART_CLEAR_TCF | |
| 351 | * @arg @ref USART_CLEAR_CTSF | |
| 352 | * @retval None | |
| 353 | */ | |
| 354 | #define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) | |
| 355 | ||
| 356 | /** @brief Clear the USART PE pending flag. | |
| 357 | * @param __HANDLE__ specifies the USART Handle. | |
| 358 | * @retval None | |
| 359 | */ | |
| 360 | #define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_PEF) | |
| 361 | ||
| 362 | /** @brief Clear the USART FE pending flag. | |
| 363 | * @param __HANDLE__ specifies the USART Handle. | |
| 364 | * @retval None | |
| 365 | */ | |
| 366 | #define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_FEF) | |
| 367 | ||
| 368 | /** @brief Clear the USART NE pending flag. | |
| 369 | * @param __HANDLE__ specifies the USART Handle. | |
| 370 | * @retval None | |
| 371 | */ | |
| 372 | #define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_NEF) | |
| 373 | ||
| 374 | /** @brief Clear the USART ORE pending flag. | |
| 375 | * @param __HANDLE__ specifies the USART Handle. | |
| 376 | * @retval None | |
| 377 | */ | |
| 378 | #define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_OREF) | |
| 379 | ||
| 380 | /** @brief Clear the USART IDLE pending flag. | |
| 381 | * @param __HANDLE__ specifies the USART Handle. | |
| 382 | * @retval None | |
| 383 | */ | |
| 384 | #define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_IDLEF) | |
| 385 | ||
| 386 | /** @brief Enable the specified USART interrupt. | |
| 387 | * @param __HANDLE__ specifies the USART Handle. | |
| 388 | * @param __INTERRUPT__ specifies the USART interrupt source to enable. | |
| 389 | * This parameter can be one of the following values: | |
| 390 | * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt | |
| 391 | * @arg @ref USART_IT_TC Transmission complete interrupt | |
| 392 | * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt | |
| 393 | * @arg @ref USART_IT_IDLE Idle line detection interrupt | |
| 394 | * @arg @ref USART_IT_PE Parity Error interrupt | |
| 395 | * @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error) | |
| 396 | * @retval None | |
| 397 | */ | |
| 398 | #define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & 0xFF) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ | |
| 399 | ((((__INTERRUPT__) & 0xFF) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ | |
| 400 | ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & USART_IT_MASK)))) | |
| 401 | ||
| 402 | /** @brief Disable the specified USART interrupt. | |
| 403 | * @param __HANDLE__ specifies the USART Handle. | |
| 404 | * @param __INTERRUPT__ specifies the USART interrupt source to disable. | |
| 405 | * This parameter can be one of the following values: | |
| 406 | * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt | |
| 407 | * @arg @ref USART_IT_TC Transmission complete interrupt | |
| 408 | * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt | |
| 409 | * @arg @ref USART_IT_IDLE Idle line detection interrupt | |
| 410 | * @arg @ref USART_IT_PE Parity Error interrupt | |
| 411 | * @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error) | |
| 412 | * @retval None | |
| 413 | */ | |
| 414 | #define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & 0xFF) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ | |
| 415 | ((((__INTERRUPT__) & 0xFF) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ | |
| 416 | ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK)))) | |
| 417 | ||
| 418 | ||
| 419 | /** @brief Check whether the specified USART interrupt has occurred or not. | |
| 420 | * @param __HANDLE__ specifies the USART Handle. | |
| 421 | * @param __IT__ specifies the USART interrupt source to check. | |
| 422 | * This parameter can be one of the following values: | |
| 423 | * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt | |
| 424 | * @arg @ref USART_IT_TC Transmission complete interrupt | |
| 425 | * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt | |
| 426 | * @arg @ref USART_IT_IDLE Idle line detection interrupt | |
| 427 | * @arg @ref USART_IT_ORE OverRun Error interrupt | |
| 428 | * @arg @ref USART_IT_NE Noise Error interrupt | |
| 429 | * @arg @ref USART_IT_FE Framing Error interrupt | |
| 430 | * @arg @ref USART_IT_PE Parity Error interrupt | |
| 431 | * @retval The new state of __IT__ (TRUE or FALSE). | |
| 432 | */ | |
| 433 | #define __HAL_USART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & (1U << ((__IT__)>> 0x08U))) | |
| 434 | ||
| 435 | /** @brief Check whether the specified USART interrupt source is enabled or not. | |
| 436 | * @param __HANDLE__ specifies the USART Handle. | |
| 437 | * @param __IT__ specifies the USART interrupt source to check. | |
| 438 | * This parameter can be one of the following values: | |
| 439 | * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt | |
| 440 | * @arg @ref USART_IT_TC Transmission complete interrupt | |
| 441 | * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt | |
| 442 | * @arg @ref USART_IT_IDLE Idle line detection interrupt | |
| 443 | * @arg @ref USART_IT_ORE OverRun Error interrupt | |
| 444 | * @arg @ref USART_IT_NE Noise Error interrupt | |
| 445 | * @arg @ref USART_IT_FE Framing Error interrupt | |
| 446 | * @arg @ref USART_IT_PE Parity Error interrupt | |
| 447 | * @retval The new state of __IT__ (TRUE or FALSE). | |
| 448 | */ | |
| 449 | #define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1U)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2U)? \ | |
| 450 | (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (1U << \ | |
| 451 | (((uint16_t)(__IT__)) & USART_IT_MASK))) | |
| 452 | ||
| 453 | ||
| 454 | /** @brief Clear the specified USART ISR flag, in setting the proper ICR register flag. | |
| 455 | * @param __HANDLE__ specifies the USART Handle. | |
| 456 | * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set | |
| 457 | * to clear the corresponding interrupt. | |
| 458 | * This parameter can be one of the following values: | |
| 459 | * @arg @ref USART_CLEAR_PEF Parity Error Clear Flag | |
| 460 | * @arg @ref USART_CLEAR_FEF Framing Error Clear Flag | |
| 461 | * @arg @ref USART_CLEAR_NEF Noise detected Clear Flag | |
| 462 | * @arg @ref USART_CLEAR_OREF OverRun Error Clear Flag | |
| 463 | * @arg @ref USART_CLEAR_IDLEF IDLE line detected Clear Flag | |
| 464 | * @arg @ref USART_CLEAR_TCF Transmission Complete Clear Flag | |
| 465 | * @arg @ref USART_CLEAR_CTSF CTS Interrupt Clear Flag | |
| 466 | * @retval None | |
| 467 | */ | |
| 468 | #define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) | |
| 469 | ||
| 470 | /** @brief Set a specific USART request flag. | |
| 471 | * @param __HANDLE__ specifies the USART Handle. | |
| 472 | * @param __REQ__ specifies the request flag to set. | |
| 473 | * This parameter can be one of the following values: | |
| 474 | * @arg @ref USART_RXDATA_FLUSH_REQUEST Receive Data flush Request | |
| 475 | @if STM32F030x6 | |
| 476 | @elseif STM32F030x8 | |
| 477 | @elseif STM32F030xC | |
| 478 | @elseif STM32F070x6 | |
| 479 | @elseif STM32F070xB | |
| 480 | @else | |
| 481 | * @arg @ref USART_TXDATA_FLUSH_REQUEST Transmit data flush Request | |
| 482 | @endif | |
| 483 | * | |
| 484 | * @retval None | |
| 485 | */ | |
| 486 | #define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (__REQ__)) | |
| 487 | ||
| 488 | /** @brief Enable the USART one bit sample method. | |
| 489 | * @param __HANDLE__ specifies the USART Handle. | |
| 490 | * @retval None | |
| 491 | */ | |
| 492 | #define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) | |
| 493 | ||
| 494 | /** @brief Disable the USART one bit sample method. | |
| 495 | * @param __HANDLE__ specifies the USART Handle. | |
| 496 | * @retval None | |
| 497 | */ | |
| 498 | #define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) | |
| 499 | ||
| 500 | /** @brief Enable USART. | |
| 501 | * @param __HANDLE__ specifies the USART Handle. | |
| 502 | * @retval None | |
| 503 | */ | |
| 504 | #define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) | |
| 505 | ||
| 506 | /** @brief Disable USART. | |
| 507 | * @param __HANDLE__ specifies the USART Handle. | |
| 508 | * @retval None | |
| 509 | */ | |
| 510 | #define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) | |
| 511 | ||
| 512 | /** | |
| 513 | * @} | |
| 514 | */ | |
| 515 | ||
| 516 | /* Private macros --------------------------------------------------------*/ | |
| 517 | /** @defgroup USART_Private_Macros USART Private Macros | |
| 518 | * @{ | |
| 519 | */ | |
| 520 | ||
| 521 | /** @brief Check USART Baud rate. | |
| 522 | * @param __BAUDRATE__ Baudrate specified by the user. | |
| 523 | * The maximum Baud Rate is derived from the maximum clock on F0 (i.e. 48 MHz) | |
| 524 | * divided by the smallest oversampling used on the USART (i.e. 8) | |
| 525 | * @retval Test result (TRUE or FALSE). | |
| 526 | */ | |
| 527 | #define IS_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 6000001U) | |
| 528 | ||
| 529 | /** | |
| 530 | * @brief Ensure that USART frame number of stop bits is valid. | |
| 531 | * @param __STOPBITS__ USART frame number of stop bits. | |
| 532 | * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) | |
| 533 | */ | |
| 534 | #ifdef USART_SMARTCARD_SUPPORT | |
| 535 | #define IS_USART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == USART_STOPBITS_0_5) || \ | |
| 536 | ((__STOPBITS__) == USART_STOPBITS_1) || \ | |
| 537 | ((__STOPBITS__) == USART_STOPBITS_1_5) || \ | |
| 538 | ((__STOPBITS__) == USART_STOPBITS_2)) | |
| 539 | #else | |
| 540 | #define IS_USART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == USART_STOPBITS_1) || \ | |
| 541 | ((__STOPBITS__) == USART_STOPBITS_2)) | |
| 542 | #endif | |
| 543 | ||
| 544 | /** | |
| 545 | * @brief Ensure that USART frame parity is valid. | |
| 546 | * @param __PARITY__ USART frame parity. | |
| 547 | * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) | |
| 548 | */ | |
| 549 | #define IS_USART_PARITY(__PARITY__) (((__PARITY__) == USART_PARITY_NONE) || \ | |
| 550 | ((__PARITY__) == USART_PARITY_EVEN) || \ | |
| 551 | ((__PARITY__) == USART_PARITY_ODD)) | |
| 552 | ||
| 553 | /** | |
| 554 | * @brief Ensure that USART communication mode is valid. | |
| 555 | * @param __MODE__ USART communication mode. | |
| 556 | * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) | |
| 557 | */ | |
| 558 | #define IS_USART_MODE(__MODE__) ((((__MODE__) & 0xFFFFFFF3U) == 0x00U) && ((__MODE__) != 0x00U)) | |
| 559 | ||
| 560 | /** | |
| 561 | * @brief Ensure that USART clock state is valid. | |
| 562 | * @param __CLOCK__ USART clock state. | |
| 563 | * @retval SET (__CLOCK__ is valid) or RESET (__CLOCK__ is invalid) | |
| 564 | */ | |
| 565 | #define IS_USART_CLOCK(__CLOCK__) (((__CLOCK__) == USART_CLOCK_DISABLE) || \ | |
| 566 | ((__CLOCK__) == USART_CLOCK_ENABLE)) | |
| 567 | ||
| 568 | /** | |
| 569 | * @brief Ensure that USART frame polarity is valid. | |
| 570 | * @param __CPOL__ USART frame polarity. | |
| 571 | * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid) | |
| 572 | */ | |
| 573 | #define IS_USART_POLARITY(__CPOL__) (((__CPOL__) == USART_POLARITY_LOW) || ((__CPOL__) == USART_POLARITY_HIGH)) | |
| 574 | ||
| 575 | /** | |
| 576 | * @brief Ensure that USART frame phase is valid. | |
| 577 | * @param __CPHA__ USART frame phase. | |
| 578 | * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid) | |
| 579 | */ | |
| 580 | #define IS_USART_PHASE(__CPHA__) (((__CPHA__) == USART_PHASE_1EDGE) || ((__CPHA__) == USART_PHASE_2EDGE)) | |
| 581 | ||
| 582 | /** | |
| 583 | * @brief Ensure that USART frame last bit clock pulse setting is valid. | |
| 584 | * @param __LASTBIT__ USART frame last bit clock pulse setting. | |
| 585 | * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid) | |
| 586 | */ | |
| 587 | #define IS_USART_LASTBIT(__LASTBIT__) (((__LASTBIT__) == USART_LASTBIT_DISABLE) || \ | |
| 588 | ((__LASTBIT__) == USART_LASTBIT_ENABLE)) | |
| 589 | ||
| 590 | /** | |
| 591 | * @} | |
| 592 | */ | |
| 593 | ||
| 594 | /* Include USART HAL Extended module */ | |
| 595 | #include "stm32f0xx_hal_usart_ex.h" | |
| 596 | ||
| 597 | /* Exported functions --------------------------------------------------------*/ | |
| 598 | /** @addtogroup USART_Exported_Functions USART Exported Functions | |
| 599 | * @{ | |
| 600 | */ | |
| 601 | ||
| 602 | /** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions | |
| 603 | * @{ | |
| 604 | */ | |
| 605 | ||
| 606 | /* Initialization and de-initialization functions ****************************/ | |
| 607 | HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart); | |
| 608 | HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart); | |
| 609 | void HAL_USART_MspInit(USART_HandleTypeDef *husart); | |
| 610 | void HAL_USART_MspDeInit(USART_HandleTypeDef *husart); | |
| 611 | ||
| 612 | /** | |
| 613 | * @} | |
| 614 | */ | |
| 615 | ||
| 616 | /** @addtogroup USART_Exported_Functions_Group2 IO operation functions | |
| 617 | * @{ | |
| 618 | */ | |
| 619 | ||
| 620 | /* IO operation functions *****************************************************/ | |
| 621 | HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout); | |
| 622 | HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); | |
| 623 | HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); | |
| 624 | HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); | |
| 625 | HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); | |
| 626 | HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); | |
| 627 | HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); | |
| 628 | HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); | |
| 629 | HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); | |
| 630 | HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart); | |
| 631 | HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart); | |
| 632 | HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart); | |
| 633 | /* Transfer Abort functions */ | |
| 634 | HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart); | |
| 635 | HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart); | |
| 636 | ||
| 637 | void HAL_USART_IRQHandler(USART_HandleTypeDef *husart); | |
| 638 | void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart); | |
| 639 | void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart); | |
| 640 | void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart); | |
| 641 | void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart); | |
| 642 | void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart); | |
| 643 | void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart); | |
| 644 | void HAL_USART_AbortCpltCallback (USART_HandleTypeDef *husart); | |
| 645 | ||
| 646 | /** | |
| 647 | * @} | |
| 648 | */ | |
| 649 | ||
| 650 | /* Peripheral Control functions ***********************************************/ | |
| 651 | ||
| 652 | /** @addtogroup USART_Exported_Functions_Group3 Peripheral State and Error functions | |
| 653 | * @{ | |
| 654 | */ | |
| 655 | ||
| 656 | /* Peripheral State and Error functions ***************************************/ | |
| 657 | HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart); | |
| 658 | uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart); | |
| 659 | ||
| 660 | /** | |
| 661 | * @} | |
| 662 | */ | |
| 663 | ||
| 664 | /** | |
| 665 | * @} | |
| 666 | */ | |
| 667 | ||
| 668 | /** | |
| 669 | * @} | |
| 670 | */ | |
| 671 | ||
| 672 | /** | |
| 673 | * @} | |
| 674 | */ | |
| 675 | ||
| 676 | #ifdef __cplusplus | |
| 677 | } | |
| 678 | #endif | |
| 679 | ||
| 680 | #endif /* __STM32F0xx_HAL_USART_H */ | |
| 681 | ||
| 682 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ | |
| 683 | ||
