| 提交 | 用户 | age | ||
| 483170 | 1 | /** |
| Q | 2 | ****************************************************************************** |
| 3 | * @file stm32f0xx_hal_rtc_ex.h | |
| 4 | * @author MCD Application Team | |
| 5 | * @brief Header file of RTC HAL Extended module. | |
| 6 | ****************************************************************************** | |
| 7 | * @attention | |
| 8 | * | |
| 9 | * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
| 10 | * | |
| 11 | * Redistribution and use in source and binary forms, with or without modification, | |
| 12 | * are permitted provided that the following conditions are met: | |
| 13 | * 1. Redistributions of source code must retain the above copyright notice, | |
| 14 | * this list of conditions and the following disclaimer. | |
| 15 | * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| 16 | * this list of conditions and the following disclaimer in the documentation | |
| 17 | * and/or other materials provided with the distribution. | |
| 18 | * 3. Neither the name of STMicroelectronics nor the names of its contributors | |
| 19 | * may be used to endorse or promote products derived from this software | |
| 20 | * without specific prior written permission. | |
| 21 | * | |
| 22 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| 23 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| 24 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| 25 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
| 26 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| 27 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
| 28 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
| 29 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
| 30 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| 31 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| 32 | * | |
| 33 | ****************************************************************************** | |
| 34 | */ | |
| 35 | ||
| 36 | /* Define to prevent recursive inclusion -------------------------------------*/ | |
| 37 | #ifndef __STM32F0xx_HAL_RTC_EX_H | |
| 38 | #define __STM32F0xx_HAL_RTC_EX_H | |
| 39 | ||
| 40 | #ifdef __cplusplus | |
| 41 | extern "C" { | |
| 42 | #endif | |
| 43 | ||
| 44 | /* Includes ------------------------------------------------------------------*/ | |
| 45 | #include "stm32f0xx_hal_def.h" | |
| 46 | ||
| 47 | /** @addtogroup STM32F0xx_HAL_Driver | |
| 48 | * @{ | |
| 49 | */ | |
| 50 | ||
| 51 | /** @defgroup RTCEx RTCEx | |
| 52 | * @{ | |
| 53 | */ | |
| 54 | ||
| 55 | /* Exported types ------------------------------------------------------------*/ | |
| 56 | ||
| 57 | /** @defgroup RTCEx_Exported_Types RTCEx Exported Types | |
| 58 | * @{ | |
| 59 | */ | |
| 60 | ||
| 61 | /** | |
| 62 | * @brief RTC Tamper structure definition | |
| 63 | */ | |
| 64 | typedef struct | |
| 65 | { | |
| 66 | uint32_t Tamper; /*!< Specifies the Tamper Pin. | |
| 67 | This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */ | |
| 68 | ||
| 69 | uint32_t Trigger; /*!< Specifies the Tamper Trigger. | |
| 70 | This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ | |
| 71 | ||
| 72 | uint32_t Filter; /*!< Specifies the RTC Filter Tamper. | |
| 73 | This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */ | |
| 74 | ||
| 75 | uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. | |
| 76 | This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */ | |
| 77 | ||
| 78 | uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . | |
| 79 | This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ | |
| 80 | ||
| 81 | uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . | |
| 82 | This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */ | |
| 83 | ||
| 84 | uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. | |
| 85 | This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ | |
| 86 | }RTC_TamperTypeDef; | |
| 87 | /** | |
| 88 | * @} | |
| 89 | */ | |
| 90 | ||
| 91 | /* Exported constants --------------------------------------------------------*/ | |
| 92 | /** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants | |
| 93 | * @{ | |
| 94 | */ | |
| 95 | ||
| 96 | /** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition | |
| 97 | * @{ | |
| 98 | */ | |
| 99 | #define RTC_OUTPUT_DISABLE 0x00000000U | |
| 100 | #define RTC_OUTPUT_ALARMA 0x00200000U | |
| 101 | #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) | |
| 102 | #define RTC_OUTPUT_WAKEUP 0x00600000U | |
| 103 | #endif | |
| 104 | ||
| 105 | /** | |
| 106 | * @} | |
| 107 | */ | |
| 108 | ||
| 109 | #if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) | |
| 110 | /** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definition | |
| 111 | * @{ | |
| 112 | */ | |
| 113 | #define RTC_BKP_DR0 0x00000000U | |
| 114 | #define RTC_BKP_DR1 0x00000001U | |
| 115 | #define RTC_BKP_DR2 0x00000002U | |
| 116 | #define RTC_BKP_DR3 0x00000003U | |
| 117 | #define RTC_BKP_DR4 0x00000004U | |
| 118 | /** | |
| 119 | * @} | |
| 120 | */ | |
| 121 | #endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */ | |
| 122 | ||
| 123 | /** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition | |
| 124 | * @{ | |
| 125 | */ | |
| 126 | #define RTC_TIMESTAMPEDGE_RISING 0x00000000U | |
| 127 | #define RTC_TIMESTAMPEDGE_FALLING 0x00000008U | |
| 128 | ||
| 129 | /** | |
| 130 | * @} | |
| 131 | */ | |
| 132 | ||
| 133 | /** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection | |
| 134 | * @{ | |
| 135 | */ | |
| 136 | #define RTC_TIMESTAMPPIN_DEFAULT 0x00000000U | |
| 137 | ||
| 138 | /** | |
| 139 | * @} | |
| 140 | */ | |
| 141 | ||
| 142 | ||
| 143 | /** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definition | |
| 144 | * @{ | |
| 145 | */ | |
| 146 | #define RTC_TAMPER_1 RTC_TAFCR_TAMP1E | |
| 147 | #define RTC_TAMPER_2 RTC_TAFCR_TAMP2E | |
| 148 | #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) | |
| 149 | #define RTC_TAMPER_3 RTC_TAFCR_TAMP3E | |
| 150 | #endif | |
| 151 | ||
| 152 | /** | |
| 153 | * @} | |
| 154 | */ | |
| 155 | ||
| 156 | ||
| 157 | ||
| 158 | /** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definition | |
| 159 | * @{ | |
| 160 | */ | |
| 161 | #define RTC_TAMPERTRIGGER_RISINGEDGE 0x00000000U | |
| 162 | #define RTC_TAMPERTRIGGER_FALLINGEDGE 0x00000002U | |
| 163 | #define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE | |
| 164 | #define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE | |
| 165 | ||
| 166 | ||
| 167 | /** | |
| 168 | * @} | |
| 169 | */ | |
| 170 | ||
| 171 | /** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definition | |
| 172 | * @{ | |
| 173 | */ | |
| 174 | #define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ | |
| 175 | ||
| 176 | #define RTC_TAMPERFILTER_2SAMPLE 0x00000800U /*!< Tamper is activated after 2 | |
| 177 | consecutive samples at the active level */ | |
| 178 | #define RTC_TAMPERFILTER_4SAMPLE 0x00001000U /*!< Tamper is activated after 4 | |
| 179 | consecutive samples at the active level */ | |
| 180 | #define RTC_TAMPERFILTER_8SAMPLE 0x00001800U /*!< Tamper is activated after 8 | |
| 181 | consecutive samples at the active level. */ | |
| 182 | ||
| 183 | /** | |
| 184 | * @} | |
| 185 | */ | |
| 186 | ||
| 187 | /** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definition | |
| 188 | * @{ | |
| 189 | */ | |
| 190 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled | |
| 191 | with a frequency = RTCCLK / 32768 */ | |
| 192 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 0x00000100U /*!< Each of the tamper inputs are sampled | |
| 193 | with a frequency = RTCCLK / 16384 */ | |
| 194 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 0x00000200U /*!< Each of the tamper inputs are sampled | |
| 195 | with a frequency = RTCCLK / 8192 */ | |
| 196 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 0x00000300U /*!< Each of the tamper inputs are sampled | |
| 197 | with a frequency = RTCCLK / 4096 */ | |
| 198 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 0x00000400U /*!< Each of the tamper inputs are sampled | |
| 199 | with a frequency = RTCCLK / 2048 */ | |
| 200 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 0x00000500U /*!< Each of the tamper inputs are sampled | |
| 201 | with a frequency = RTCCLK / 1024 */ | |
| 202 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 0x00000600U /*!< Each of the tamper inputs are sampled | |
| 203 | with a frequency = RTCCLK / 512 */ | |
| 204 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 0x00000700U /*!< Each of the tamper inputs are sampled | |
| 205 | with a frequency = RTCCLK / 256 */ | |
| 206 | ||
| 207 | /** | |
| 208 | * @} | |
| 209 | */ | |
| 210 | ||
| 211 | /** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definition | |
| 212 | * @{ | |
| 213 | */ | |
| 214 | #define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before | |
| 215 | sampling during 1 RTCCLK cycle */ | |
| 216 | #define RTC_TAMPERPRECHARGEDURATION_2RTCCLK 0x00002000U /*!< Tamper pins are pre-charged before | |
| 217 | sampling during 2 RTCCLK cycles */ | |
| 218 | #define RTC_TAMPERPRECHARGEDURATION_4RTCCLK 0x00004000U /*!< Tamper pins are pre-charged before | |
| 219 | sampling during 4 RTCCLK cycles */ | |
| 220 | #define RTC_TAMPERPRECHARGEDURATION_8RTCCLK 0x00006000U /*!< Tamper pins are pre-charged before | |
| 221 | sampling during 8 RTCCLK cycles */ | |
| 222 | ||
| 223 | /** | |
| 224 | * @} | |
| 225 | */ | |
| 226 | ||
| 227 | /** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definition | |
| 228 | * @{ | |
| 229 | */ | |
| 230 | #define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */ | |
| 231 | #define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000U /*!< TimeStamp on Tamper Detection event is not saved */ | |
| 232 | ||
| 233 | /** | |
| 234 | * @} | |
| 235 | */ | |
| 236 | ||
| 237 | /** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definition | |
| 238 | * @{ | |
| 239 | */ | |
| 240 | #define RTC_TAMPER_PULLUP_ENABLE 0x00000000U /*!< Tamper pins are pre-charged before sampling */ | |
| 241 | #define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< Tamper pins are not pre-charged before sampling */ | |
| 242 | ||
| 243 | /** | |
| 244 | * @} | |
| 245 | */ | |
| 246 | ||
| 247 | #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) | |
| 248 | /** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definition | |
| 249 | * @{ | |
| 250 | */ | |
| 251 | #define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000U | |
| 252 | #define RTC_WAKEUPCLOCK_RTCCLK_DIV8 0x00000001U | |
| 253 | #define RTC_WAKEUPCLOCK_RTCCLK_DIV4 0x00000002U | |
| 254 | #define RTC_WAKEUPCLOCK_RTCCLK_DIV2 0x00000003U | |
| 255 | #define RTC_WAKEUPCLOCK_CK_SPRE_16BITS 0x00000004U | |
| 256 | #define RTC_WAKEUPCLOCK_CK_SPRE_17BITS 0x00000006U | |
| 257 | ||
| 258 | ||
| 259 | /** | |
| 260 | * @} | |
| 261 | */ | |
| 262 | #endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */ | |
| 263 | ||
| 264 | /** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definition | |
| 265 | * @{ | |
| 266 | */ | |
| 267 | #define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000U /*!< If RTCCLK = 32768 Hz, Smooth calibation | |
| 268 | period is 32s, else 2exp20 RTCCLK seconds */ | |
| 269 | #define RTC_SMOOTHCALIB_PERIOD_16SEC 0x00002000U /*!< If RTCCLK = 32768 Hz, Smooth calibation | |
| 270 | period is 16s, else 2exp19 RTCCLK seconds */ | |
| 271 | #define RTC_SMOOTHCALIB_PERIOD_8SEC 0x00004000U /*!< If RTCCLK = 32768 Hz, Smooth calibation | |
| 272 | period is 8s, else 2exp18 RTCCLK seconds */ | |
| 273 | ||
| 274 | /** | |
| 275 | * @} | |
| 276 | */ | |
| 277 | ||
| 278 | /** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definition | |
| 279 | * @{ | |
| 280 | */ | |
| 281 | #define RTC_SMOOTHCALIB_PLUSPULSES_SET 0x00008000U /*!< The number of RTCCLK pulses added | |
| 282 | during a X -second window = Y - CALM[8:0] | |
| 283 | with Y = 512, 256, 128 when X = 32, 16, 8 */ | |
| 284 | #define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000U /*!< The number of RTCCLK pulses subbstited | |
| 285 | during a 32-second window = CALM[8:0] */ | |
| 286 | ||
| 287 | /** | |
| 288 | * @} | |
| 289 | */ | |
| 290 | /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions | |
| 291 | * @{ | |
| 292 | */ | |
| 293 | #define RTC_CALIBOUTPUT_512HZ 0x00000000U | |
| 294 | #define RTC_CALIBOUTPUT_1HZ 0x00080000U | |
| 295 | ||
| 296 | /** | |
| 297 | * @} | |
| 298 | */ | |
| 299 | ||
| 300 | /** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definition | |
| 301 | * @{ | |
| 302 | */ | |
| 303 | #define RTC_SHIFTADD1S_RESET 0x00000000U | |
| 304 | #define RTC_SHIFTADD1S_SET 0x80000000U | |
| 305 | ||
| 306 | /** | |
| 307 | * @} | |
| 308 | */ | |
| 309 | ||
| 310 | /** | |
| 311 | * @} | |
| 312 | */ | |
| 313 | ||
| 314 | /* Exported macros -----------------------------------------------------------*/ | |
| 315 | /** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros | |
| 316 | * @{ | |
| 317 | */ | |
| 318 | ||
| 319 | /* ---------------------------------WAKEUPTIMER---------------------------------*/ | |
| 320 | /** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer | |
| 321 | * @{ | |
| 322 | */ | |
| 323 | #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) | |
| 324 | /** | |
| 325 | * @brief Enable the RTC WakeUp Timer peripheral. | |
| 326 | * @param __HANDLE__ specifies the RTC handle. | |
| 327 | * @retval None | |
| 328 | */ | |
| 329 | #define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) | |
| 330 | ||
| 331 | /** | |
| 332 | * @brief Disable the RTC WakeUp Timer peripheral. | |
| 333 | * @param __HANDLE__ specifies the RTC handle. | |
| 334 | * @retval None | |
| 335 | */ | |
| 336 | #define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) | |
| 337 | ||
| 338 | /** | |
| 339 | * @brief Enable the RTC WakeUpTimer interrupt. | |
| 340 | * @param __HANDLE__ specifies the RTC handle. | |
| 341 | * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled. | |
| 342 | * This parameter can be: | |
| 343 | * @arg RTC_IT_WUT: WakeUpTimer interrupt | |
| 344 | * @retval None | |
| 345 | */ | |
| 346 | #define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) | |
| 347 | ||
| 348 | /** | |
| 349 | * @brief Disable the RTC WakeUpTimer interrupt. | |
| 350 | * @param __HANDLE__ specifies the RTC handle. | |
| 351 | * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be disabled. | |
| 352 | * This parameter can be: | |
| 353 | * @arg RTC_IT_WUT: WakeUpTimer interrupt | |
| 354 | * @retval None | |
| 355 | */ | |
| 356 | #define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) | |
| 357 | ||
| 358 | /** | |
| 359 | * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. | |
| 360 | * @param __HANDLE__ specifies the RTC handle. | |
| 361 | * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check. | |
| 362 | * This parameter can be: | |
| 363 | * @arg RTC_IT_WUT: WakeUpTimer interrupt | |
| 364 | * @retval None | |
| 365 | */ | |
| 366 | #define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET) ? SET : RESET) | |
| 367 | ||
| 368 | /** | |
| 369 | * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. | |
| 370 | * @param __HANDLE__ specifies the RTC handle. | |
| 371 | * @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check. | |
| 372 | * This parameter can be: | |
| 373 | * @arg RTC_IT_WUT: WakeUpTimer interrupt | |
| 374 | * @retval None | |
| 375 | */ | |
| 376 | #define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) | |
| 377 | ||
| 378 | /** | |
| 379 | * @brief Get the selected RTC WakeUpTimer's flag status. | |
| 380 | * @param __HANDLE__ specifies the RTC handle. | |
| 381 | * @param __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not. | |
| 382 | * This parameter can be: | |
| 383 | * @arg RTC_FLAG_WUTF | |
| 384 | * @arg RTC_FLAG_WUTWF | |
| 385 | * @retval None | |
| 386 | */ | |
| 387 | #define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET) | |
| 388 | ||
| 389 | /** | |
| 390 | * @brief Clear the RTC Wake Up timer's pending flags. | |
| 391 | * @param __HANDLE__ specifies the RTC handle. | |
| 392 | * @param __FLAG__ specifies the RTC WakeUpTimer Flag to clear. | |
| 393 | * This parameter can be: | |
| 394 | * @arg RTC_FLAG_WUTF | |
| 395 | * @retval None | |
| 396 | */ | |
| 397 | #define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) | |
| 398 | ||
| 399 | /* WAKE-UP TIMER EXTI */ | |
| 400 | /* ------------------ */ | |
| 401 | /** | |
| 402 | * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line. | |
| 403 | * @retval None | |
| 404 | */ | |
| 405 | #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
| 406 | ||
| 407 | /** | |
| 408 | * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line. | |
| 409 | * @retval None | |
| 410 | */ | |
| 411 | #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) | |
| 412 | ||
| 413 | /** | |
| 414 | * @brief Enable event on the RTC WakeUp Timer associated Exti line. | |
| 415 | * @retval None. | |
| 416 | */ | |
| 417 | #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
| 418 | ||
| 419 | /** | |
| 420 | * @brief Disable event on the RTC WakeUp Timer associated Exti line. | |
| 421 | * @retval None. | |
| 422 | */ | |
| 423 | #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) | |
| 424 | ||
| 425 | /** | |
| 426 | * @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line. | |
| 427 | * @retval None. | |
| 428 | */ | |
| 429 | #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
| 430 | ||
| 431 | /** | |
| 432 | * @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line. | |
| 433 | * @retval None. | |
| 434 | */ | |
| 435 | #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) | |
| 436 | ||
| 437 | /** | |
| 438 | * @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line. | |
| 439 | * @retval None. | |
| 440 | */ | |
| 441 | #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
| 442 | ||
| 443 | /** | |
| 444 | * @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line. | |
| 445 | * @retval None. | |
| 446 | */ | |
| 447 | #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) | |
| 448 | ||
| 449 | /** | |
| 450 | * @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. | |
| 451 | * @retval None. | |
| 452 | */ | |
| 453 | #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); | |
| 454 | ||
| 455 | /** | |
| 456 | * @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. | |
| 457 | * This parameter can be: | |
| 458 | * @retval None. | |
| 459 | */ | |
| 460 | #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); | |
| 461 | ||
| 462 | /** | |
| 463 | * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not. | |
| 464 | * @retval Line Status. | |
| 465 | */ | |
| 466 | #define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
| 467 | ||
| 468 | /** | |
| 469 | * @brief Clear the RTC WakeUp Timer associated Exti line flag. | |
| 470 | * @retval None. | |
| 471 | */ | |
| 472 | #define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
| 473 | ||
| 474 | /** | |
| 475 | * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line. | |
| 476 | * @retval None. | |
| 477 | */ | |
| 478 | #define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
| 479 | #endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */ | |
| 480 | /** | |
| 481 | * @} | |
| 482 | */ | |
| 483 | ||
| 484 | /* ---------------------------------TIMESTAMP---------------------------------*/ | |
| 485 | /** @defgroup RTCEx_Timestamp RTC Timestamp | |
| 486 | * @{ | |
| 487 | */ | |
| 488 | /** | |
| 489 | * @brief Enable the RTC TimeStamp peripheral. | |
| 490 | * @param __HANDLE__ specifies the RTC handle. | |
| 491 | * @retval None | |
| 492 | */ | |
| 493 | #define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) | |
| 494 | ||
| 495 | /** | |
| 496 | * @brief Disable the RTC TimeStamp peripheral. | |
| 497 | * @param __HANDLE__ specifies the RTC handle. | |
| 498 | * @retval None | |
| 499 | */ | |
| 500 | #define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) | |
| 501 | ||
| 502 | /** | |
| 503 | * @brief Enable the RTC TimeStamp interrupt. | |
| 504 | * @param __HANDLE__ specifies the RTC handle. | |
| 505 | * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled. | |
| 506 | * This parameter can be: | |
| 507 | * @arg RTC_IT_TS: TimeStamp interrupt | |
| 508 | * @retval None | |
| 509 | */ | |
| 510 | #define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) | |
| 511 | ||
| 512 | /** | |
| 513 | * @brief Disable the RTC TimeStamp interrupt. | |
| 514 | * @param __HANDLE__ specifies the RTC handle. | |
| 515 | * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled. | |
| 516 | * This parameter can be: | |
| 517 | * @arg RTC_IT_TS: TimeStamp interrupt | |
| 518 | * @retval None | |
| 519 | */ | |
| 520 | #define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) | |
| 521 | ||
| 522 | /** | |
| 523 | * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. | |
| 524 | * @param __HANDLE__ specifies the RTC handle. | |
| 525 | * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt to check. | |
| 526 | * This parameter can be: | |
| 527 | * @arg RTC_IT_TS: TimeStamp interrupt | |
| 528 | * @retval None | |
| 529 | */ | |
| 530 | #define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET) | |
| 531 | ||
| 532 | /** | |
| 533 | * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. | |
| 534 | * @param __HANDLE__ specifies the RTC handle. | |
| 535 | * @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check. | |
| 536 | * This parameter can be: | |
| 537 | * @arg RTC_IT_TS: TimeStamp interrupt | |
| 538 | * @retval None | |
| 539 | */ | |
| 540 | #define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) | |
| 541 | ||
| 542 | /** | |
| 543 | * @brief Get the selected RTC TimeStamp's flag status. | |
| 544 | * @param __HANDLE__ specifies the RTC handle. | |
| 545 | * @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not. | |
| 546 | * This parameter can be: | |
| 547 | * @arg RTC_FLAG_TSF | |
| 548 | * @arg RTC_FLAG_TSOVF | |
| 549 | * @retval None | |
| 550 | */ | |
| 551 | #define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) | |
| 552 | ||
| 553 | /** | |
| 554 | * @brief Clear the RTC Time Stamp's pending flags. | |
| 555 | * @param __HANDLE__ specifies the RTC handle. | |
| 556 | * @param __FLAG__ specifies the RTC Alarm Flag to clear. | |
| 557 | * This parameter can be: | |
| 558 | * @arg RTC_FLAG_TSF | |
| 559 | * @retval None | |
| 560 | */ | |
| 561 | #define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) | |
| 562 | ||
| 563 | /** | |
| 564 | * @} | |
| 565 | */ | |
| 566 | ||
| 567 | /* ---------------------------------TAMPER------------------------------------*/ | |
| 568 | /** @defgroup RTCEx_Tamper RTC Tamper | |
| 569 | * @{ | |
| 570 | */ | |
| 571 | ||
| 572 | /** | |
| 573 | * @brief Enable the RTC Tamper1 input detection. | |
| 574 | * @param __HANDLE__ specifies the RTC handle. | |
| 575 | * @retval None | |
| 576 | */ | |
| 577 | #define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E)) | |
| 578 | ||
| 579 | /** | |
| 580 | * @brief Disable the RTC Tamper1 input detection. | |
| 581 | * @param __HANDLE__ specifies the RTC handle. | |
| 582 | * @retval None | |
| 583 | */ | |
| 584 | #define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E)) | |
| 585 | ||
| 586 | /** | |
| 587 | * @brief Enable the RTC Tamper2 input detection. | |
| 588 | * @param __HANDLE__ specifies the RTC handle. | |
| 589 | * @retval None | |
| 590 | */ | |
| 591 | #define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E)) | |
| 592 | ||
| 593 | /** | |
| 594 | * @brief Disable the RTC Tamper2 input detection. | |
| 595 | * @param __HANDLE__ specifies the RTC handle. | |
| 596 | * @retval None | |
| 597 | */ | |
| 598 | #define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E)) | |
| 599 | ||
| 600 | #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) | |
| 601 | /** | |
| 602 | * @brief Enable the RTC Tamper3 input detection. | |
| 603 | * @param __HANDLE__ specifies the RTC handle. | |
| 604 | * @retval None | |
| 605 | */ | |
| 606 | #define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP3E)) | |
| 607 | ||
| 608 | /** | |
| 609 | * @brief Disable the RTC Tamper3 input detection. | |
| 610 | * @param __HANDLE__ specifies the RTC handle. | |
| 611 | * @retval None | |
| 612 | */ | |
| 613 | #define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP3E)) | |
| 614 | ||
| 615 | #endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */ | |
| 616 | /** | |
| 617 | * @brief Enable the RTC Tamper interrupt. | |
| 618 | * @param __HANDLE__ specifies the RTC handle. | |
| 619 | * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled. | |
| 620 | * This parameter can be any combination of the following values: | |
| 621 | * @arg RTC_IT_TAMP: Tamper interrupt | |
| 622 | * @retval None | |
| 623 | */ | |
| 624 | #define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAFCR |= (__INTERRUPT__)) | |
| 625 | ||
| 626 | /** | |
| 627 | * @brief Disable the RTC Tamper interrupt. | |
| 628 | * @param __HANDLE__ specifies the RTC handle. | |
| 629 | * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled. | |
| 630 | * This parameter can be any combination of the following values: | |
| 631 | * @arg RTC_IT_TAMP: Tamper interrupt | |
| 632 | * @retval None | |
| 633 | */ | |
| 634 | #define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAFCR &= ~(__INTERRUPT__)) | |
| 635 | ||
| 636 | #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) | |
| 637 | /** | |
| 638 | * @brief Check whether the specified RTC Tamper interrupt has occurred or not. | |
| 639 | * @param __HANDLE__ specifies the RTC handle. | |
| 640 | * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check. | |
| 641 | * This parameter can be: | |
| 642 | * @arg RTC_IT_TAMP1: Tamper1 interrupt | |
| 643 | * @arg RTC_IT_TAMP2: Tamper2 interrupt | |
| 644 | * @arg RTC_IT_TAMP3: Tamper3 interrupt | |
| 645 | * @retval None | |
| 646 | */ | |
| 647 | #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET) | |
| 648 | #else | |
| 649 | ||
| 650 | /** | |
| 651 | * @brief Check whether the specified RTC Tamper interrupt has occurred or not. | |
| 652 | * @param __HANDLE__ specifies the RTC handle. | |
| 653 | * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check. | |
| 654 | * This parameter can be: | |
| 655 | * @arg RTC_IT_TAMP1: Tamper1 interrupt | |
| 656 | * @arg RTC_IT_TAMP2: Tamper2 interrupt | |
| 657 | * @retval None | |
| 658 | */ | |
| 659 | #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET) | |
| 660 | ||
| 661 | #endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */ | |
| 662 | ||
| 663 | /** | |
| 664 | * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. | |
| 665 | * @param __HANDLE__ specifies the RTC handle. | |
| 666 | * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check. | |
| 667 | * This parameter can be: | |
| 668 | * @arg RTC_IT_TAMP: Tamper interrupt | |
| 669 | * @retval None | |
| 670 | */ | |
| 671 | #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET) | |
| 672 | ||
| 673 | #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) | |
| 674 | /** | |
| 675 | * @brief Get the selected RTC Tamper's flag status. | |
| 676 | * @param __HANDLE__ specifies the RTC handle. | |
| 677 | * @param __FLAG__ specifies the RTC Tamper Flag is pending or not. | |
| 678 | * This parameter can be: | |
| 679 | * @arg RTC_FLAG_TAMP1F | |
| 680 | * @arg RTC_FLAG_TAMP2F | |
| 681 | * @arg RTC_FLAG_TAMP3F | |
| 682 | * @retval None | |
| 683 | */ | |
| 684 | #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) | |
| 685 | ||
| 686 | ||
| 687 | /** | |
| 688 | * @brief Clear the RTC Tamper's pending flags. | |
| 689 | * @param __HANDLE__ specifies the RTC handle. | |
| 690 | * @param __FLAG__ specifies the RTC Tamper Flag to clear. | |
| 691 | * This parameter can be: | |
| 692 | * @arg RTC_FLAG_TAMP1F | |
| 693 | * @arg RTC_FLAG_TAMP2F | |
| 694 | * @arg RTC_FLAG_TAMP3F | |
| 695 | * @retval None | |
| 696 | */ | |
| 697 | #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) | |
| 698 | ||
| 699 | #else | |
| 700 | ||
| 701 | /** | |
| 702 | * @brief Get the selected RTC Tamper's flag status. | |
| 703 | * @param __HANDLE__ specifies the RTC handle. | |
| 704 | * @param __FLAG__ specifies the RTC Tamper Flag is pending or not. | |
| 705 | * This parameter can be: | |
| 706 | * @arg RTC_FLAG_TAMP1F | |
| 707 | * @arg RTC_FLAG_TAMP2F | |
| 708 | * @retval None | |
| 709 | */ | |
| 710 | #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) | |
| 711 | ||
| 712 | ||
| 713 | /** | |
| 714 | * @brief Clear the RTC Tamper's pending flags. | |
| 715 | * @param __HANDLE__ specifies the RTC handle. | |
| 716 | * @param __FLAG__ specifies the RTC Tamper Flag to clear. | |
| 717 | * This parameter can be: | |
| 718 | * @arg RTC_FLAG_TAMP1F | |
| 719 | * @arg RTC_FLAG_TAMP2F | |
| 720 | * @retval None | |
| 721 | */ | |
| 722 | #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) | |
| 723 | ||
| 724 | #endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */ | |
| 725 | /** | |
| 726 | * @} | |
| 727 | */ | |
| 728 | ||
| 729 | /* --------------------------TAMPER/TIMESTAMP---------------------------------*/ | |
| 730 | /** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI | |
| 731 | * @{ | |
| 732 | */ | |
| 733 | ||
| 734 | /* TAMPER TIMESTAMP EXTI */ | |
| 735 | /* --------------------- */ | |
| 736 | /** | |
| 737 | * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line. | |
| 738 | * @retval None | |
| 739 | */ | |
| 740 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
| 741 | ||
| 742 | /** | |
| 743 | * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line. | |
| 744 | * @retval None | |
| 745 | */ | |
| 746 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) | |
| 747 | ||
| 748 | /** | |
| 749 | * @brief Enable event on the RTC Tamper and Timestamp associated Exti line. | |
| 750 | * @retval None. | |
| 751 | */ | |
| 752 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
| 753 | ||
| 754 | /** | |
| 755 | * @brief Disable event on the RTC Tamper and Timestamp associated Exti line. | |
| 756 | * @retval None. | |
| 757 | */ | |
| 758 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) | |
| 759 | ||
| 760 | /** | |
| 761 | * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
| 762 | * @retval None. | |
| 763 | */ | |
| 764 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
| 765 | ||
| 766 | /** | |
| 767 | * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
| 768 | * @retval None. | |
| 769 | */ | |
| 770 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) | |
| 771 | ||
| 772 | /** | |
| 773 | * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
| 774 | * @retval None. | |
| 775 | */ | |
| 776 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
| 777 | ||
| 778 | /** | |
| 779 | * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
| 780 | * @retval None. | |
| 781 | */ | |
| 782 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) | |
| 783 | ||
| 784 | /** | |
| 785 | * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
| 786 | * @retval None. | |
| 787 | */ | |
| 788 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); | |
| 789 | ||
| 790 | /** | |
| 791 | * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
| 792 | * This parameter can be: | |
| 793 | * @retval None. | |
| 794 | */ | |
| 795 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); | |
| 796 | ||
| 797 | /** | |
| 798 | * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not. | |
| 799 | * @retval Line Status. | |
| 800 | */ | |
| 801 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
| 802 | ||
| 803 | /** | |
| 804 | * @brief Clear the RTC Tamper and Timestamp associated Exti line flag. | |
| 805 | * @retval None. | |
| 806 | */ | |
| 807 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
| 808 | ||
| 809 | /** | |
| 810 | * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line | |
| 811 | * @retval None. | |
| 812 | */ | |
| 813 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
| 814 | /** | |
| 815 | * @} | |
| 816 | */ | |
| 817 | ||
| 818 | /* ------------------------------Calibration----------------------------------*/ | |
| 819 | /** @defgroup RTCEx_Calibration RTC Calibration | |
| 820 | * @{ | |
| 821 | */ | |
| 822 | ||
| 823 | /** | |
| 824 | * @brief Enable the RTC calibration output. | |
| 825 | * @param __HANDLE__ specifies the RTC handle. | |
| 826 | * @retval None | |
| 827 | */ | |
| 828 | #define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) | |
| 829 | ||
| 830 | /** | |
| 831 | * @brief Disable the calibration output. | |
| 832 | * @param __HANDLE__ specifies the RTC handle. | |
| 833 | * @retval None | |
| 834 | */ | |
| 835 | #define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) | |
| 836 | ||
| 837 | /** | |
| 838 | * @brief Enable the clock reference detection. | |
| 839 | * @param __HANDLE__ specifies the RTC handle. | |
| 840 | * @retval None | |
| 841 | */ | |
| 842 | #define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) | |
| 843 | ||
| 844 | /** | |
| 845 | * @brief Disable the clock reference detection. | |
| 846 | * @param __HANDLE__ specifies the RTC handle. | |
| 847 | * @retval None | |
| 848 | */ | |
| 849 | #define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) | |
| 850 | ||
| 851 | /** | |
| 852 | * @brief Get the selected RTC shift operation's flag status. | |
| 853 | * @param __HANDLE__ specifies the RTC handle. | |
| 854 | * @param __FLAG__ specifies the RTC shift operation Flag is pending or not. | |
| 855 | * This parameter can be: | |
| 856 | * @arg RTC_FLAG_SHPF | |
| 857 | * @retval None | |
| 858 | */ | |
| 859 | #define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) | |
| 860 | /** | |
| 861 | * @} | |
| 862 | */ | |
| 863 | ||
| 864 | /** | |
| 865 | * @} | |
| 866 | */ | |
| 867 | ||
| 868 | /* Exported functions --------------------------------------------------------*/ | |
| 869 | /** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions | |
| 870 | * @{ | |
| 871 | */ | |
| 872 | ||
| 873 | /* RTC TimeStamp and Tamper functions *****************************************/ | |
| 874 | /** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp and Tamper functions | |
| 875 | * @{ | |
| 876 | */ | |
| 877 | ||
| 878 | HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); | |
| 879 | HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); | |
| 880 | HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); | |
| 881 | HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); | |
| 882 | ||
| 883 | HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); | |
| 884 | HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); | |
| 885 | HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); | |
| 886 | void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc); | |
| 887 | ||
| 888 | void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); | |
| 889 | void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); | |
| 890 | #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) | |
| 891 | void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc); | |
| 892 | #endif | |
| 893 | void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); | |
| 894 | HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
| 895 | HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
| 896 | HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
| 897 | #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) | |
| 898 | HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
| 899 | #endif | |
| 900 | /** | |
| 901 | * @} | |
| 902 | */ | |
| 903 | ||
| 904 | #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) | |
| 905 | /* RTC Wake-up functions ******************************************************/ | |
| 906 | /** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions | |
| 907 | * @{ | |
| 908 | */ | |
| 909 | ||
| 910 | HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); | |
| 911 | HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); | |
| 912 | uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); | |
| 913 | uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); | |
| 914 | void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); | |
| 915 | void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); | |
| 916 | HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
| 917 | #endif | |
| 918 | /** | |
| 919 | * @} | |
| 920 | */ | |
| 921 | ||
| 922 | /* Extended Control functions ************************************************/ | |
| 923 | /** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions | |
| 924 | * @{ | |
| 925 | */ | |
| 926 | ||
| 927 | #if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) | |
| 928 | void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); | |
| 929 | uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); | |
| 930 | #endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */ | |
| 931 | ||
| 932 | HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue); | |
| 933 | HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); | |
| 934 | HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); | |
| 935 | HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); | |
| 936 | HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); | |
| 937 | HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); | |
| 938 | HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); | |
| 939 | HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); | |
| 940 | /** | |
| 941 | * @} | |
| 942 | */ | |
| 943 | ||
| 944 | /* Extended RTC features functions *******************************************/ | |
| 945 | ||
| 946 | /** | |
| 947 | * @} | |
| 948 | */ | |
| 949 | ||
| 950 | /* Private types -------------------------------------------------------------*/ | |
| 951 | /* Private variables ---------------------------------------------------------*/ | |
| 952 | /* Private constants ---------------------------------------------------------*/ | |
| 953 | /** @defgroup RTCEx_Private_Constants RTCEx Private Constants | |
| 954 | * @{ | |
| 955 | */ | |
| 956 | #define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR19) /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */ | |
| 957 | #define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR20) /*!< External interrupt line 20 Connected to the RTC Wakeup event */ | |
| 958 | /** | |
| 959 | * @} | |
| 960 | */ | |
| 961 | ||
| 962 | /* Private macros ------------------------------------------------------------*/ | |
| 963 | /** @defgroup RTCEx_Private_Macros RTCEx Private Macros | |
| 964 | * @{ | |
| 965 | */ | |
| 966 | ||
| 967 | /** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters | |
| 968 | * @{ | |
| 969 | */ | |
| 970 | #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) | |
| 971 | #define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \ | |
| 972 | ((OUTPUT) == RTC_OUTPUT_ALARMA) || \ | |
| 973 | ((OUTPUT) == RTC_OUTPUT_WAKEUP)) | |
| 974 | #else | |
| 975 | #define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \ | |
| 976 | ((OUTPUT) == RTC_OUTPUT_ALARMA)) | |
| 977 | #endif | |
| 978 | ||
| 979 | #define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER) | |
| 980 | ||
| 981 | #define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ | |
| 982 | ((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) | |
| 983 | #if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) | |
| 984 | #define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6U) == 0x00U) && ((TAMPER) != (uint32_t)RESET)) | |
| 985 | ||
| 986 | #else | |
| 987 | #define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFF6U) == 0x00U) && ((TAMPER) != (uint32_t)RESET)) | |
| 988 | ||
| 989 | #endif | |
| 990 | ||
| 991 | #define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT)) | |
| 992 | ||
| 993 | ||
| 994 | #define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ | |
| 995 | ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ | |
| 996 | ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ | |
| 997 | ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL)) | |
| 998 | #define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \ | |
| 999 | ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \ | |
| 1000 | ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \ | |
| 1001 | ((FILTER) == RTC_TAMPERFILTER_8SAMPLE)) | |
| 1002 | #define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ | |
| 1003 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ | |
| 1004 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ | |
| 1005 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ | |
| 1006 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ | |
| 1007 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ | |
| 1008 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ | |
| 1009 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) | |
| 1010 | #define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ | |
| 1011 | ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ | |
| 1012 | ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ | |
| 1013 | ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) | |
| 1014 | #define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ | |
| 1015 | ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) | |
| 1016 | #define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \ | |
| 1017 | ((STATE) == RTC_TAMPER_PULLUP_DISABLE)) | |
| 1018 | #define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ | |
| 1019 | ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ | |
| 1020 | ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ | |
| 1021 | ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ | |
| 1022 | ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ | |
| 1023 | ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) | |
| 1024 | ||
| 1025 | #define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFFU) | |
| 1026 | ||
| 1027 | ||
| 1028 | #define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ | |
| 1029 | ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ | |
| 1030 | ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) | |
| 1031 | #define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ | |
| 1032 | ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) | |
| 1033 | ||
| 1034 | ||
| 1035 | #define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FFU) | |
| 1036 | #define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ | |
| 1037 | ((SEL) == RTC_SHIFTADD1S_SET)) | |
| 1038 | #define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFFU) | |
| 1039 | #define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ | |
| 1040 | ((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) | |
| 1041 | /** | |
| 1042 | * @} | |
| 1043 | */ | |
| 1044 | ||
| 1045 | /** | |
| 1046 | * @} | |
| 1047 | */ | |
| 1048 | ||
| 1049 | /** | |
| 1050 | * @} | |
| 1051 | */ | |
| 1052 | ||
| 1053 | /** | |
| 1054 | * @} | |
| 1055 | */ | |
| 1056 | ||
| 1057 | #ifdef __cplusplus | |
| 1058 | } | |
| 1059 | #endif | |
| 1060 | ||
| 1061 | #endif /* __STM32F0xx_HAL_RTC_EX_H */ | |
| 1062 | ||
| 1063 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ | |
| 1064 | ||
