| 提交 | 用户 | age | ||
| 8b51c7 | 1 | /*! |
| Q | 2 | * \file radio.h |
| 3 | * | |
| 4 | * \brief Radio driver API definition | |
| 5 | * | |
| 6 | * \copyright Revised BSD License, see section \ref LICENSE. | |
| 7 | * | |
| 8 | * \code | |
| 9 | * ______ _ | |
| 10 | * / _____) _ | | | |
| 11 | * ( (____ _____ ____ _| |_ _____ ____| |__ | |
| 12 | * \____ \| ___ | (_ _) ___ |/ ___) _ \ | |
| 13 | * _____) ) ____| | | || |_| ____( (___| | | | | |
| 14 | * (______/|_____)_|_|_| \__)_____)\____)_| |_| | |
| 15 | * (C)2013-2017 Semtech | |
| 16 | * | |
| 17 | * \endcode | |
| 18 | * | |
| 19 | * \author Miguel Luis ( Semtech ) | |
| 20 | * | |
| 21 | * \author Gregory Cristian ( Semtech ) | |
| 22 | */ | |
| 23 | #ifndef __RADIO_H__ | |
| 24 | #define __RADIO_H__ | |
| 25 | ||
| 26 | #include<stdint.h> | |
| 27 | #include<stdbool.h> | |
| 28 | ||
| 29 | //#define USE_MODEM_LORA | |
| 30 | ||
| 31 | /*! | |
| 32 | * Radio driver supported modems | |
| 33 | */ | |
| 34 | typedef enum | |
| 35 | { | |
| 36 | MODEM_FSK = 0, | |
| 37 | MODEM_LORA, | |
| 38 | }RadioModems_t; | |
| 39 | ||
| 40 | /*! | |
| 41 | * Radio driver internal state machine states definition | |
| 42 | */ | |
| 43 | typedef enum | |
| 44 | { | |
| 45 | RF_IDLE = 0, //!< The radio is idle | |
| 46 | RF_RX_RUNNING, //!< The radio is in reception state | |
| 47 | RF_TX_RUNNING, //!< The radio is in transmission state | |
| 48 | RF_CAD, //!< The radio is doing channel activity detection | |
| 49 | }RadioState_t; | |
| 50 | ||
| 51 | /*! | |
| 52 | * \brief Radio driver callback functions | |
| 53 | */ | |
| 54 | typedef struct | |
| 55 | { | |
| 56 | /*! | |
| 57 | * \brief Tx Done callback prototype. | |
| 58 | */ | |
| 59 | void ( *TxDone )( void ); | |
| 60 | /*! | |
| 61 | * \brief Tx Timeout callback prototype. | |
| 62 | */ | |
| 63 | void ( *TxTimeout )( void ); | |
| 64 | /*! | |
| 65 | * \brief Rx Done callback prototype. | |
| 66 | * | |
| 67 | * \param [IN] payload Received buffer pointer | |
| 68 | * \param [IN] size Received buffer size | |
| 69 | * \param [IN] rssi RSSI value computed while receiving the frame [dBm] | |
| 70 | * \param [IN] snr Raw SNR value given by the radio hardware | |
| 71 | * FSK : N/A ( set to 0 ) | |
| 72 | * LoRa: SNR value in dB | |
| 73 | */ | |
| 74 | void ( *RxDone )( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ); | |
| 75 | /*! | |
| 76 | * \brief Rx Timeout callback prototype. | |
| 77 | */ | |
| 78 | void ( *RxTimeout )( void ); | |
| 79 | /*! | |
| 80 | * \brief Rx Error callback prototype. | |
| 81 | */ | |
| 82 | void ( *RxError )( void ); | |
| 83 | /*! | |
| 84 | * \brief FHSS Change Channel callback prototype. | |
| 85 | * | |
| 86 | * \param [IN] currentChannel Index number of the current channel | |
| 87 | */ | |
| 88 | void ( *FhssChangeChannel )( uint8_t currentChannel ); | |
| 89 | ||
| 90 | /*! | |
| 91 | * \brief CAD Done callback prototype. | |
| 92 | * | |
| 93 | * \param [IN] channelDetected Channel Activity detected during the CAD | |
| 94 | */ | |
| 95 | void ( *CadDone ) ( bool channelActivityDetected ); | |
| 96 | }RadioEvents_t; | |
| 97 | ||
| 98 | /*! | |
| 99 | * \brief Radio driver definition | |
| 100 | */ | |
| 101 | struct Radio_s | |
| 102 | { | |
| 103 | /*! | |
| 104 | * \brief Initializes the radio | |
| 105 | * | |
| 106 | * \param [IN] events Structure containing the driver callback functions | |
| 107 | */ | |
| 108 | void ( *Init )( RadioEvents_t *events ); | |
| 109 | /*! | |
| 110 | * Return current radio status | |
| 111 | * | |
| 112 | * \param status Radio status.[RF_IDLE, RF_RX_RUNNING, RF_TX_RUNNING] | |
| 113 | */ | |
| 114 | RadioState_t ( *GetStatus )( void ); | |
| 115 | /*! | |
| 116 | * \brief Configures the radio with the given modem | |
| 117 | * | |
| 118 | * \param [IN] modem Modem to be used [0: FSK, 1: LoRa] | |
| 119 | */ | |
| 120 | void ( *SetModem )( RadioModems_t modem ); | |
| 121 | /*! | |
| 122 | * \brief Sets the channel frequency | |
| 123 | * | |
| 124 | * \param [IN] freq Channel RF frequency | |
| 125 | */ | |
| 126 | void ( *SetChannel )( uint32_t freq ); | |
| 127 | /*! | |
| 128 | * \brief Checks if the channel is free for the given time | |
| 129 | * | |
| 130 | * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] | |
| 131 | * \param [IN] freq Channel RF frequency | |
| 132 | * \param [IN] rssiThresh RSSI threshold | |
| 133 | * \param [IN] maxCarrierSenseTime Max time while the RSSI is measured | |
| 134 | * | |
| 135 | * \retval isFree [true: Channel is free, false: Channel is not free] | |
| 136 | */ | |
| 137 | bool ( *IsChannelFree )( RadioModems_t modem, uint32_t freq, int16_t rssiThresh, uint32_t maxCarrierSenseTime ); | |
| 138 | /*! | |
| 139 | * \brief Generates a 32 bits random value based on the RSSI readings | |
| 140 | * | |
| 141 | * \remark This function sets the radio in LoRa modem mode and disables | |
| 142 | * all interrupts. | |
| 143 | * After calling this function either Radio.SetRxConfig or | |
| 144 | * Radio.SetTxConfig functions must be called. | |
| 145 | * | |
| 146 | * \retval randomValue 32 bits random value | |
| 147 | */ | |
| 148 | uint32_t ( *Random )( void ); | |
| 149 | /*! | |
| 150 | * \brief Sets the reception parameters | |
| 151 | * | |
| 152 | * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] | |
| 153 | * \param [IN] bandwidth Sets the bandwidth | |
| 154 | * FSK : >= 2600 and <= 250000 Hz | |
| 155 | * LoRa: [0: 125 kHz, 1: 250 kHz, | |
| 156 | * 2: 500 kHz, 3: Reserved] | |
| 157 | * \param [IN] datarate Sets the Datarate | |
| 158 | * FSK : 600..300000 bits/s | |
| 159 | * LoRa: [6: 64, 7: 128, 8: 256, 9: 512, | |
| 160 | * 10: 1024, 11: 2048, 12: 4096 chips] | |
| 161 | * \param [IN] coderate Sets the coding rate (LoRa only) | |
| 162 | * FSK : N/A ( set to 0 ) | |
| 163 | * LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8] | |
| 164 | * \param [IN] bandwidthAfc Sets the AFC Bandwidth (FSK only) | |
| 165 | * FSK : >= 2600 and <= 250000 Hz | |
| 166 | * LoRa: N/A ( set to 0 ) | |
| 167 | * \param [IN] preambleLen Sets the Preamble length | |
| 168 | * FSK : Number of bytes | |
| 169 | * LoRa: Length in symbols (the hardware adds 4 more symbols) | |
| 170 | * \param [IN] symbTimeout Sets the RxSingle timeout value | |
| 171 | * FSK : timeout in number of bytes | |
| 172 | * LoRa: timeout in symbols | |
| 173 | * \param [IN] fixLen Fixed length packets [0: variable, 1: fixed] | |
| 174 | * \param [IN] payloadLen Sets payload length when fixed length is used | |
| 175 | * \param [IN] crcOn Enables/Disables the CRC [0: OFF, 1: ON] | |
| 176 | * \param [IN] freqHopOn Enables disables the intra-packet frequency hopping | |
| 177 | * FSK : N/A ( set to 0 ) | |
| 178 | * LoRa: [0: OFF, 1: ON] | |
| 179 | * \param [IN] hopPeriod Number of symbols between each hop | |
| 180 | * FSK : N/A ( set to 0 ) | |
| 181 | * LoRa: Number of symbols | |
| 182 | * \param [IN] iqInverted Inverts IQ signals (LoRa only) | |
| 183 | * FSK : N/A ( set to 0 ) | |
| 184 | * LoRa: [0: not inverted, 1: inverted] | |
| 185 | * \param [IN] rxContinuous Sets the reception in continuous mode | |
| 186 | * [false: single mode, true: continuous mode] | |
| 187 | */ | |
| 188 | void ( *SetRxConfig )( RadioModems_t modem, uint32_t bandwidth, | |
| 189 | uint32_t datarate, uint8_t coderate, | |
| 190 | uint32_t bandwidthAfc, uint16_t preambleLen, | |
| 191 | uint16_t symbTimeout, bool fixLen, | |
| 192 | uint8_t payloadLen, | |
| 193 | bool crcOn, bool freqHopOn, uint8_t hopPeriod, | |
| 194 | bool iqInverted, bool rxContinuous ); | |
| 195 | /*! | |
| 196 | * \brief Sets the transmission parameters | |
| 197 | * | |
| 198 | * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] | |
| 199 | * \param [IN] power Sets the output power [dBm] | |
| 200 | * \param [IN] fdev Sets the frequency deviation (FSK only) | |
| 201 | * FSK : [Hz] | |
| 202 | * LoRa: 0 | |
| 203 | * \param [IN] bandwidth Sets the bandwidth (LoRa only) | |
| 204 | * FSK : 0 | |
| 205 | * LoRa: [0: 125 kHz, 1: 250 kHz, | |
| 206 | * 2: 500 kHz, 3: Reserved] | |
| 207 | * \param [IN] datarate Sets the Datarate | |
| 208 | * FSK : 600..300000 bits/s | |
| 209 | * LoRa: [6: 64, 7: 128, 8: 256, 9: 512, | |
| 210 | * 10: 1024, 11: 2048, 12: 4096 chips] | |
| 211 | * \param [IN] coderate Sets the coding rate (LoRa only) | |
| 212 | * FSK : N/A ( set to 0 ) | |
| 213 | * LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8] | |
| 214 | * \param [IN] preambleLen Sets the preamble length | |
| 215 | * FSK : Number of bytes | |
| 216 | * LoRa: Length in symbols (the hardware adds 4 more symbols) | |
| 217 | * \param [IN] fixLen Fixed length packets [0: variable, 1: fixed] | |
| 218 | * \param [IN] crcOn Enables disables the CRC [0: OFF, 1: ON] | |
| 219 | * \param [IN] freqHopOn Enables disables the intra-packet frequency hopping | |
| 220 | * FSK : N/A ( set to 0 ) | |
| 221 | * LoRa: [0: OFF, 1: ON] | |
| 222 | * \param [IN] hopPeriod Number of symbols between each hop | |
| 223 | * FSK : N/A ( set to 0 ) | |
| 224 | * LoRa: Number of symbols | |
| 225 | * \param [IN] iqInverted Inverts IQ signals (LoRa only) | |
| 226 | * FSK : N/A ( set to 0 ) | |
| 227 | * LoRa: [0: not inverted, 1: inverted] | |
| 228 | * \param [IN] timeout Transmission timeout [ms] | |
| 229 | */ | |
| 230 | void ( *SetTxConfig )( RadioModems_t modem, int8_t power, uint32_t fdev, | |
| 231 | uint32_t bandwidth, uint32_t datarate, | |
| 232 | uint8_t coderate, uint16_t preambleLen, | |
| 233 | bool fixLen, bool crcOn, bool freqHopOn, | |
| 234 | uint8_t hopPeriod, bool iqInverted, uint32_t timeout ); | |
| 235 | /*! | |
| 236 | * \brief Checks if the given RF frequency is supported by the hardware | |
| 237 | * | |
| 238 | * \param [IN] frequency RF frequency to be checked | |
| 239 | * \retval isSupported [true: supported, false: unsupported] | |
| 240 | */ | |
| 241 | bool ( *CheckRfFrequency )( uint32_t frequency ); | |
| 242 | /*! | |
| 243 | * \brief Computes the packet time on air in ms for the given payload | |
| 244 | * | |
| 245 | * \Remark Can only be called once SetRxConfig or SetTxConfig have been called | |
| 246 | * | |
| 247 | * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] | |
| 248 | * \param [IN] pktLen Packet payload length | |
| 249 | * | |
| 250 | * \retval airTime Computed airTime (ms) for the given packet payload length | |
| 251 | */ | |
| 252 | uint32_t ( *TimeOnAir )( RadioModems_t modem, uint8_t pktLen ); | |
| 253 | /*! | |
| 254 | * \brief Sends the buffer of size. Prepares the packet to be sent and sets | |
| 255 | * the radio in transmission | |
| 256 | * | |
| 257 | * \param [IN]: buffer Buffer pointer | |
| 258 | * \param [IN]: size Buffer size | |
| 259 | */ | |
| 260 | void ( *Send )( uint8_t *buffer, uint8_t size ); | |
| 261 | /*! | |
| 262 | * \brief Sets the radio in sleep mode | |
| 263 | */ | |
| 264 | void ( *Sleep )( void ); | |
| 265 | /*! | |
| 266 | * \brief Sets the radio in standby mode | |
| 267 | */ | |
| 268 | void ( *Standby )( void ); | |
| 269 | /*! | |
| 270 | * \brief Sets the radio in reception mode for the given time | |
| 271 | * \param [IN] timeout Reception timeout [ms] | |
| 272 | * [0: continuous, others timeout] | |
| 273 | */ | |
| 274 | void ( *Rx )( uint32_t timeout ); | |
| 275 | /*! | |
| 276 | * \brief Start a Channel Activity Detection | |
| 277 | */ | |
| 278 | void ( *StartCad )( void ); | |
| 279 | /*! | |
| 280 | * \brief Sets the radio in continuous wave transmission mode | |
| 281 | * | |
| 282 | * \param [IN]: freq Channel RF frequency | |
| 283 | * \param [IN]: power Sets the output power [dBm] | |
| 284 | * \param [IN]: time Transmission mode timeout [s] | |
| 285 | */ | |
| 286 | void ( *SetTxContinuousWave )( uint32_t freq, int8_t power, uint16_t time ); | |
| 287 | /*! | |
| 288 | * \brief Reads the current RSSI value | |
| 289 | * | |
| 290 | * \retval rssiValue Current RSSI value in [dBm] | |
| 291 | */ | |
| 292 | int16_t ( *Rssi )( RadioModems_t modem ); | |
| 293 | /*! | |
| 294 | * \brief Writes the radio register at the specified address | |
| 295 | * | |
| 296 | * \param [IN]: addr Register address | |
| 297 | * \param [IN]: data New register value | |
| 298 | */ | |
| 299 | void ( *Write )( uint16_t addr, uint8_t data ); | |
| 300 | /*! | |
| 301 | * \brief Reads the radio register at the specified address | |
| 302 | * | |
| 303 | * \param [IN]: addr Register address | |
| 304 | * \retval data Register value | |
| 305 | */ | |
| 306 | uint8_t ( *Read )( uint16_t addr ); | |
| 307 | /*! | |
| 308 | * \brief Writes multiple radio registers starting at address | |
| 309 | * | |
| 310 | * \param [IN] addr First Radio register address | |
| 311 | * \param [IN] buffer Buffer containing the new register's values | |
| 312 | * \param [IN] size Number of registers to be written | |
| 313 | */ | |
| 314 | void ( *WriteBuffer )( uint16_t addr, uint8_t *buffer, uint8_t size ); | |
| 315 | /*! | |
| 316 | * \brief Reads multiple radio registers starting at address | |
| 317 | * | |
| 318 | * \param [IN] addr First Radio register address | |
| 319 | * \param [OUT] buffer Buffer where to copy the registers data | |
| 320 | * \param [IN] size Number of registers to be read | |
| 321 | */ | |
| 322 | void ( *ReadBuffer )( uint16_t addr, uint8_t *buffer, uint8_t size ); | |
| 323 | /*! | |
| 324 | * \brief Sets the maximum payload length. | |
| 325 | * | |
| 326 | * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] | |
| 327 | * \param [IN] max Maximum payload length in bytes | |
| 328 | */ | |
| 329 | void ( *SetMaxPayloadLength )( RadioModems_t modem, uint8_t max ); | |
| 330 | /*! | |
| 331 | * \brief Sets the network to public or private. Updates the sync byte. | |
| 332 | * | |
| 333 | * \remark Applies to LoRa modem only | |
| 334 | * | |
| 335 | * \param [IN] enable if true, it enables a public network | |
| 336 | */ | |
| 337 | void ( *SetPublicNetwork )( bool enable ); | |
| 338 | /*! | |
| 339 | * \brief Gets the time required for the board plus radio to get out of sleep.[ms] | |
| 340 | * | |
| 341 | * \retval time Radio plus board wakeup time in ms. | |
| 342 | */ | |
| 343 | uint32_t ( *GetWakeupTime )( void ); | |
| 344 | /*! | |
| 345 | * \brief Process radio irq | |
| 346 | */ | |
| 347 | void ( *IrqProcess )( void ); | |
| 348 | /* | |
| 349 | * The next functions are available only on SX126x radios. | |
| 350 | */ | |
| 351 | /*! | |
| 352 | * \brief Sets the radio in reception mode with Max LNA gain for the given time | |
| 353 | * | |
| 354 | * \remark Available on SX126x radios only. | |
| 355 | * | |
| 356 | * \param [IN] timeout Reception timeout [ms] | |
| 357 | * [0: continuous, others timeout] | |
| 358 | */ | |
| 359 | void ( *RxBoosted )( uint32_t timeout ); | |
| 360 | /*! | |
| 361 | * \brief Sets the Rx duty cycle management parameters | |
| 362 | * | |
| 363 | * \remark Available on SX126x radios only. | |
| 364 | * | |
| 365 | * \param [in] rxTime Structure describing reception timeout value | |
| 366 | * \param [in] sleepTime Structure describing sleep timeout value | |
| 367 | */ | |
| 368 | void ( *SetRxDutyCycle ) ( uint32_t rxTime, uint32_t sleepTime ); | |
| 369 | }; | |
| 370 | ||
| 371 | /*! | |
| 372 | * \brief Radio driver | |
| 373 | * | |
| 374 | * \remark This variable is defined and initialized in the specific radio | |
| 375 | * board implementation | |
| 376 | */ | |
| 377 | extern const struct Radio_s Radio; | |
| 378 | ||
| 379 | #endif // __RADIO_H__ | |
